Jabra PanaCast 50 Video Bar Wall Mount Instruction Manual

Jabra PanaCast 50 Video Bar Wall Mount

PanaCast 50 Video Bar System
The PanaCast 50 Video Bar System is a high-quality video conferencing solution that provides a wide field of view and exceptional audio and video performance. It is designed to enhance collaboration and communication in professional settings.

Wall Mount
The PanaCast 50 Video Bar System includes a Wall Mount that allows you to securely attach the video bar to a wall. This ensures stability and optimal positioning for your video conferencing setup.

Items Included

• Wall Mount

Tools Needed (not supplied in the pack)

• Drill
• Wall screws
• Level

Product Usage Instructions

Installation below screen:

1. Measure 8cm from the bottom of the screen to the top of the Wall Mount. Using a pencil, mark the screw holes on the wall as illustrated.
2. Screw the Wall Mount to the wall using a drill (screws not supplied).
3. Attach the video bar to the Wall Mount. No screws are required.
4. Rotate the video bar down for easy access to the ports.
5. Attach the relevant cables to the video bar.
6. Screw the cable cover to the video bar using the supplied screws.
7. Rotate the PanaCast 50 into its final position and angle the camera to point at eye-level.

Installation above screen:

• Measure 8cm from the top of the screen to the bottom of the Wall Mount. Using a pencil, mark the screw holes on the wall as illustrated.
• Screw the Wall Mount to the wall using a drill (screws not supplied).
• Attach the video bar to the Wall Mount. No screws are required.
• Rotate the video bar down for easy access to the ports.
• Attach the relevant cables to the video bar.
• Screw the cable cover to the video bar using the supplied screws.
• Rotate the PanaCast 50 into its final position and angle the camera to point at eye-level.

Please refer to page 1 for installation below the screen and page 5 for installation above the screen in the user manual for detailed illustrations and instructions.

Items included

Tools needed

(not supplied in the pack)

Installation

Install below screen

1. Measure 8cm from the bottom of the screen to the top of the Wall Mount. Using a pencil, mark the screw holes on the wall, as illustrated.
2. Screw the Wall Mount to the wall using a drill (screws not supplied).
3. Attach the video bar to the Wall Mount. Screws are not required.
4. Rotate the video bar down for easy access to the ports.
5. Attach the relevant cables to the video bar..
6. Screw the cable cover to the video bar using the supplied screws.
7. Rotate the PanaCast 50 into its final position and angle the camera to point at eye-level.

Install below screen

1. Measure 8cm from the top of the screen to the bottom of the Wall Mount. Using a pencil, mark the screw holes on the wall, as illustrated.

2. Screw the Wall Mount to the wall using a drill (screws not supplied).

3. Attach the video bar to the Wall Mount. Screws are not required.

4. Rotate the video bar down for easy access to the ports.

5. Attach the relevant cables to the video bar..

6. Screw the cable cover to the video bar using the supplied screws.

7. Rotate the PanaCast 50 into its final position and angle the camera to point at eye-level.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>