PROAIM P-LLBT-100 Bowl Baby Camera Tripod Stand User Manual
- June 13, 2024
- PROAIM
Table of Contents
PROAIM P-LLBT-100 Bowl Baby Camera Tripod Stand
Product Information
The HD 100mm Bowl Baby Camera Tripod Stand with Lever-Friction and Aluminum Spreader (P-LLBT-100) is a professional camera tripod designed for stability and customization. It comes with an aluminum spreader that allows precise customization of the tripod’s length and stability. The tripod stand features a one-stage telescopic design with a friction knob that extends up to 6 inches for low-angle shots and up to 34 inches for greater elevation. It also includes locking pins on each leg to secure the adjusted height and prevent them from retracting under load. The tripod stand has a 100mm bowl base, making it compatible with devices such as sliders, jibs, and geared heads.
Product Usage Instructions
- Inspect the contents of the package to ensure you have received all the necessary components.
- Attach the aluminum spreader to the spiked legs of the tripod stand for precise customization of length and stability.
- Telescope out the arms of the spreader from 41cm/16 to 66cm/26 radius to create a broader footprint for a secure and steady base.
- Adjust the length of the tripod stand using the provided locking knobs on the spreader.
- Extend the tripod stand up to 6 inches for low-angle shots or up to 34 inches for greater elevation using the friction knob.
- Ensure the adjusted height is secured by engaging the locking pins on each leg.
- Use the 100mm bowl base of the tripod stand to mount devices such as sliders, jibs, and geared heads.
- Your Proaim HD 100mm Bowl Baby Camera Tripod Stand with Lever-Friction and Aluminum Spreader is now ready for use.
Note: Please refer to the assembly manual for more detailed instructions and safety guidelines.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below.
Aluminum Spreader Setup
- Extend the Spreader on the floor and loosen all three knobs.
- NOTE: The Spreader attaches to the spiked legs of the spreader to provide precise customization of the tripod’s length and stability.
- After loosening the knobs, extend the Spreader per your requirement.
- You can lock the position using the locking knobs present on each arm.
- NOTE: The arms of the Spreader can easily telescope out from 41cm/16” to 66cm/26” radius, offering a broader footprint to create a secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of
Spreader
Tripod Stand Setup
100mm Bowl Baby Camera Tripod Stand Setup
- Loosen all three adjustment knobs to set the desired height of the Stand.
- NOTE: One-stage telescopic design with friction knob extends up to 6 inches to capture low-angle shots, and conversely, it can be easily extended up to 34 inches for greater elevation.
- After setting the height, tighten the knobs to secure the Stand, as shown in the image.
- NOTE: Locking pins on each leg secures the adjusted height, preventing them from retracting under load.
- Unlock the red knob to adjust the Tripod’s legs according to your requirement.
- After adjusting the Tripod legs, re-lock the knob, as shown in the image.
- Mount the Tripod on the aluminum Spreader by equally aligning them.
- After mounting the Tripod, properly secure it using the rubber gripper.
- Loosen the locking knob of the 100mm bowl fluid head (Not Included) and remove it.
- Now, mount the fluid head on the Tripod Stand.
- Tighten the locking knob to secure the fluid head.
- Press the red locking lever of the fluid head (Not Included) to unlock it.
- After unlocking the yellow locking lever, remove the top plate of the fluid head
- Attach it to the Camera (Not Included) by matching the threads.
- Secure the top plate and the Camera (Not Included) using a screwdriver.
- ow, mount the Camera (Not Included) on the fluid head and properly lock it as shown in the image.
- NOTE: The assembly of the whole setup is quick and tool-less, saving you valuable production time.
- Tripod Stand works efficiently with compatible devices such as Sliders, Jibs, and Geared Heads with its 100mm bowl base.
YOUR PROAIM HD 100MM BOWL BABY CAMERA TRIPOD STAND W LEVER-FRICTION AND
ALUMINUM SPREADER ALL DRESSED UP AND READY TO GO!
Warranty
We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability:
We are not liable for damage caused by products that we do not supply or from
mishandling in transit, accident, misuse, neglect, lack of care of the
product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product. HD 100mm Bowl Baby Camera Tripod Stand w Lever-Friction and Aluminum Spreader (P-LLBT-100)