VINCI GP210 Wireless Charger Speaker with Lamp Instructions

VINCI GP210 Wireless Charger Speaker with Lamp

PRODUCT FEATURE

•  Night light
•  Alarm clock
•  Wireless fast charge
•  Speaker
•  Charging distance 3mm

APPEARANCE BUTTONS

1.  Charging Area
2. Function button
3. Clock display area
4. ) Mobile phone holder
5. ED Light
6.  Night light switch
7.  silicone shackles
8. Type-C input
9.  Speaker cavity

SETTING UP YOUR SPEAKER

Flip the wireless charging pad lightly

Keep your mob lie phone flat or upright on the charging pad.

SETTING UP YOUR SPEAKER

1.  Connect the USB port of the USB data cable to the power adapter and end the Type-C port to the Type-C input
2.  After the Alarm Clock is powered on, the charging indicator light”•” flashes, and the light stops flashing when fully charged.
3.  Place the required wireless charging device in the charging indicator area of the alarm clock. If the device is properly placed, charging indicator f will turn on to indicate the device is charging.
   Charging indicator f will tum off when the device is finished charging.

NIGHT LIGHT FUNCTION

•  Tap switch to tum on/off night light.
•  Hold the switch to adjust light brightness and end the darkness.
• When the alarm goes off, tap the night light switch to snooze for 5 minutes.
• WhenAnoozed the alarm will ring once every 10 minutes four limes. Hold (Ml to tum off the alarm.

INSTRUCTIONS FOR WIRELESS SPEAKERS

When the power cord is plugged in, tap there will be a prompt lone, Bluetooth function will be turned on. In the pairing state tum on the Bluetooth function of your phone, in Bluetooth devices, GP-210 appears in the search for Bluetooth Speaker. Click to select the device name of GP-210. Automatically enter the pairing, after the pairing connection is successful, there will be a prompt tone. Hold down again to exit the Bluetooth function.
When the speaker is playing:

1. Pres6 to I ► ] Play/pause.
2. Hold to I ►] Disconnect and hold down again to restore the connection.
3.  Press [ – ] to reduce the volume; hold to switch to the previous song.
4. Press I+ ] to increase the volume; hold to switch to the next song.

CLOCK BUTTON FUNCTION

MODE

• Tap 0setlingffime and Minute Adjustment–, Clock -> Alarm 1–> Alarm 2-+12124 hour system -+year-+ Month/day. Hold to return to the clock interface.
• Hold 0 during clock interface to display -> Alarm 1 -> Alarm 2 -+ 12124 hour system -,year-, Month/Day-+Clock. Tap 0 to return to the clock interface.

BLUETOOTH SWITCH

•  Press@switch to access Bluetooth.
•  Hold @to cycle display, clock-> month/day, hold switch again to close cycle, and return to the clock display.

SCREEN BRIGHTNESS/DOWN

• Press – to adjust the brightness of the Iha screen to cycle from high/ medium to low/Off.
• In adjustment mode, press – to reduce the number.

INCREASE/ALARM SWITCH

• In setting mode, tap to increase the number.
•  Hold to tum on Alarm 1-+Alarm 2-+Alarm 1 and 2-+Close sequential loop Alarm Clock icon on the digital display screen indicates that the alarm clock is on.
•  The alarm clock rings once every 10 minutes and repeats four times. Hold the 0 key to stop the alarm, tap thel9 button or tap the night light switch to snooze for 5 minutes.

DEVICE COMPATIBILITY
This product supports fast wireless charging and complies with the Qi wireless charging standard; through magnetic induction. Should be short- distance radio transmission, the equipment supports all compliant with QI standard wireless charging devices. With a 20V output adapter, wireless charging supports 1 SW load. With over-voltage and over-temperature protection.

Warning

•  Do not use or store the product in direct sunlight or high-temperature places for a long time.
•  Do not Charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
•  Do not disassemble or modify this product.
•  Do not touch the AC adapter with wet hands.
•  Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20-45°C.

SPECIFICATIONS

• Material: imported ABS + hardware
• Power input: DC5V/2A Wl2.1A
• Charging efficiency: ..:75%
• Power. 5WI 7 .5Wf 1 OW/ 15W
• Battery capacity 1 800 mAh
• Weight: 508g
• Speaker power: 405W
• Product size: 151×15 1 X 71 mm
• The charging port of the power supply is the international type-c port.

FCC WARMING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two oondlUons: this device may not cause harmful Interference, and this device must accept any interference reooive<l, including interference that may cause undesired operation.
Caution: approved The by the user party is cautioned responsible that for changes compliance or would modifications void 1he not use expressly authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Iha instructions, may cause harmful interference to radio communications. However, there is no guarantee that lha1 interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the following user is measured: encouraged lo try lo correct the interference by one or more of

•  Reorient or relocate the antenna.
•  Increase the separation between 111e equipment and receiver.
• Connect receiver the ie connected. equipment into an outlet on a circuit different from that ta which Consult the dealer or an experienced radio/T\/ technician for help.
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

WARNINGS:

1.  To reduc9 the risk of fire or 9lectrtc shock, do not e><pose this product to
2.  rain Do or not moisture.  to dripping or splashing, and do not place with liquids, such as vases, on or near the apparatus. As with any electronic product. use care not to spill liquids into any part of the product. Exposure to liquids may create a failure and/or fire hazard.
3.  Do not use any charger ott1e r than that s pacifically provided for use wtth the equipment.
4. Do not leave a battery on prolonged charge when not in use.
5.  Afte, extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>