Govee H6602 AI Gaming Sync Box Kit User Manual

June 13, 2024
Govee

User Manual
Model: H6602
Govee Al Gaming Sync Box with Backlight

Safety Instructions

Read and follow all the safety instructions:

  • This product is not waterproof. Avoid exposing its components to splashes, water drops, or every high-humidity environments.
  • Be careful of static electricity during installation and usage and keep away from sharp objects and strong corrosive chemicals.
  • When bending the light strip during installation, avoid folding its component as this may affect its service life.
  • The internal light sources cannot be replaced. If they sustain damage, the product should be replaced.
  • External dimmers cannot be used with this product.
  • Avoid installing the light bars near potentially dangerous sources (e.g., candles, liquid-filled objects.)

Introduction

Thanks for choosing Govee Al Gaming Sync Box with Backlight. This product adopts the HDMI color picking technique to achieve accurate synchronization of light colors without being affected by ambient lights. It supports a refresh rate up to 60Hz for 4K, 144Hz for 2K, and 240Hz for 1080P.

What You Get

Sync Box 1
Light Strip 1
Power Adapter 1
HDMI Cable 2
Mounting Clips 10
User Manual 1
Service Card 1

At a Glance

Fornt View:Govee H6602 AI Gaming Sync Box Kit - Front
View Rear View:Govee H6602 AI Gaming Sync Box
Kit - Rear View

OUT Zone Type-C Type-C: Plug in the strip light.
HDMI Output signals to the monitor or TV.
IN Zone HDMI Connect to HDMI signal sources like PC host, internet TV set-

top box, etc.
POWER| Connect to power.

Installing Your Device

  1. Preparation Before Installing:
    a. Unbox the strip lights and check all items listed in the packing list.
    b. Power on the strip lights and check whether they light up.

  2. Installing Steps:
    a. Wipe the installation surface to ensure it is dry and clean.
    Govee H6602 AI Gaming Sync Box Kit - dry and Cleanb. Stick the strip lights to the back of the TV. Press them firmly and then reinforce them with the provided clips.Govee H6602 AI Gaming Sync
Box Kit - Provided clips

  3. Connect the light strip to the Type-C ports on the Govee Al Gaming Sync Box.
    Govee H6602 AI Gaming Sync Box Kit - ports

  4. Connect one end of an HDMI cable to any port in the IN area, and the other to an HDMI input device (such as your game console, or computer). Only port 3 supports the ARC function

  5. Connect one end of an HDMI cable to the HDMI port in the OUT area and the other to your monitor or TV.

  6. Connect the adapter to the POWER port, the device will start to work after the power on.

Pairing Your Device with the Govee Home App

What you need:

  • A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. SGHz is not supported.
  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).Govee H6602 AI Gaming Sync Box Kit - Home App
  2. Turn on the Bluetooth in your smartphone.
  3. Open the app, tap the “+” icon in the top right corner and search “H6602″.
  4. Tap the device icon and follow the onscreen instructions to complete pairing.

Controlling the Device with Your Voice

  1. Open the app, then tap the device icon to enter detail page.
  2. Tap the setting icon in the top right corner.
  3. Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

Power Input (Adapter) 100-240VAC 50/60Hz
Power Input (Control Box) 12VDC 3A(27-34inch)

12VDC 4A (55-65inch)
12VDC 5A (75-85inch)
Length| 1.8m/5.9ft (27-34inch)
3.6m/11.8ft (55-65inch)
5m/16.4ft (75-85inch)
Light Displaying Technology| RGBIC
Control Method| App,Control Box, Voice Control

Troubleshooting

  1. The strip lights do not light up.
    • Check all wired connections. Unplug and Re-plug the power adapter and the DC port to ensure the control box powers on correctly. The strip lights will light up 10s after being powered on.
    • Ensure the strip lights are plugged into the LED port before they are powered on.
    • If you unplugged the strip lights, reboot the power adapter after the lights are working correctly.

  2. The provided adhesives don’t stick well.
    • Wipe the installation surface to ensure it is dry and clean.
    • When attaching the strip lights, ensure you press down firmly.
    • Reinforce the strip lights with the provided clips or other strong adhesives.

  3. Wi-Fi connection failure
    • Do not skip the Wi-Fi connecting step during setup. Ensure you input the correct Wi-Fi name and password according to the app instructions.
    • 5GHz Wi-Fi is not supported. Connect the strip lights to a 2.4G Wi-Fi band then reboot your router.
    • With your smartphone, check whether the Wi-Fi connection is stable.
    • The strip lights are not compatible with the Wi-Fi name or password. Please change the Wi-Fi name and password.
    • The strip lights are not compatible with your router. Please try to connect your strip lights to a smartphone hotspot.

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Official Website: www.govee.com
@Govee @govee_official @govee.official @Goveeofficial @Govee.smarthome

Compliance Information

EU Compliance Statement:
Shenzhen Qianyan Technology LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.govee.com/ EU contact address:
SUNRISE MOMENTS LIMITED (E-mail: [email protected])1st Floor Newmarket House, Newmarket Square, The Coombe, Dublin 8, DUBLIN, Ireland, DO8VAP9
UK Compliance Statement:
Shenzhen Qianyan Technology LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. A copy of the UK Declaration of Conformity is available online at www.govee.com/

| Bluetooth®| Wi-Fi
---|---|---
Frequency| 2.4GHz| 2.4GH/
Maximum Power| < 13dBm| < 15dBm

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons Is for free. The owner of old appliances is responsible to bring the  appliances to these collecting points or to similar collection points.With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
For ambiance lighting only. Not for illumination.
This device uses a non-replaceable light source. When the light source reaches the end of its life vcle, this device should be replaced.
The light source or separate control gear is not intended for use in other applications.
Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
Do not use the rope light when covered or recessed into a surface;
Do not open or cut the rope light.
To reduce the risk of strangulation, the flexible wiringconnected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver,
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-005.
Responsible party:
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 2501 Chatham Rd Suite R Springfield IL 62704
Email: [email protected]
Contact information: https://www.govee.com/support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Qianyan Technology LTD. is under license.
The trademark Govee has been authorised to Shenzhen Qianyan Technology LTD.
Copyright ©2021 Shenzhen Qianyan Technology LTD.
All Rights Reserved.

FOR INDOOR USE ONLY

PAP 22
Raccolta Carta For FAQs and more information,
please visit! WWW.govee.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Govee User Manuals

Related Manuals