VADDIO 998-2105-000 IR Remote Master User Guide
- June 13, 2024
- Vaddio
Table of Contents
VADDIO 998-2105-000 IR Remote Master
Product Information
The Vaddio IR Remote Master is a remote control device designed for controlling compatible cameras. It features various buttons and controls for accessing different camera capabilities and functions. The remote control operates using two AAA batteries.
Installing the Batteries
To install the batteries in the Vaddio IR Remote Master, follow these steps:
- Remove the cover from the back of the remote. You may need to press down on the upper edge while sliding it off.
- Insert two AAA batteries into the battery opening, following the diagram provided.
- Slide and snap the cover back into place to secure the batteries.
Tips for Using the Remote
When using the Vaddio IR Remote Master, keep in mind the following tips:
- The remote may have controls for capabilities that your camera does not have.
- Some buttons may behave differently depending on the camera’s capabilities.
Storing and Clearing Presets
The Vaddio IR Remote Master allows you to store and clear presets on compatible cameras. Presets can store zoom, pan/tilt location,color settings, or a combination of these. Additional presets may be available through the camera’s web interface. Follow these instructions to store and clear presets:
- To store a preset:
- Set up the desired shot on the camera.
- Hold down the Set button on the remote.
- Press one of the numbered preset buttons to assign the current shot as a preset.
- To clear a preset:
- Press and hold the Clr button on the remote.
- While holding the Clr button, press the number of the preset you want to clear.
Vaddio IR Remote Master
August 2022 998-2105-000 (Worldwide)
Installing the Batteries
The remote uses two AAA batteries
- Remove the cover from the back of the remote. You may need to press down on the upper edge while sliding it off.
- Install the batteries as shown in the diagram in the battery opening.
- Slide and snap the cover back into place.
Tips for Using the Remote
- Presets: The remote provides access to camera presets. Your camera’s web interface may provide access to additional camera presets.
- Camera selection: The remote has three IR channels, so it can control up to three cameras independently. Check your camera’s manual for information on setting it as camera 1, camera 2, or camera 3. By default, Vaddio cameras respond as camera 1.
- Troubleshooting tip: If the camera does not respond to the remote, press the Camera 1 button and try again. If that doesn’t fix the problem, try the other camera selection buttons.
- Autoframing cameras: Autoframing pauses when you press any button that affects the shot (arrows, home, zoom, presets).
IR Remote Master Quick Reference
The remote may have controls for capabilities that your camera does not have. Some buttons behave in different ways depending on the camera’s capabilities.
| Power button and indicator – Set the camera to standby mode, or return
to full-power mode.
---|---
|
| Arrow buttons – Pan and tilt.
Home button – Function depends on the model of camera. For Autoframing cameras, press to resume auto-framing.
| Network button – Display the camera’s IP address on the video
output(s).
| Backlight button – Adjusts for excess light behind the camera’s
subject.
| Mute button – Mute connected or built-in microphone(s).
| Volume +/– button – Increase or decrease the volume from the connected
or built-in speaker.
| Focus +/– buttons – Adjust the focal distance in or out, when Manual
focus mode is selected.
| Zoom +/– button – Increase or decrease the zoom.
| Focus Auto/Man buttons – Select automatic or manual focus.
| Pan Dir buttons – Set pan direction relative to the person using the
remote. Std is from the camera’s perspective. Rev is from the perspective of a
person facing the camera.
| Set, Clr, and Preset buttons – Set, clear, or select preset shots.
Storing and Clearing Presets
- Depending on the camera, presets may store zoom, pan/tilt location, color settings, or some combination of these.
- Your camera may have additional presets available through its web interface.
To store a preset:
Set up the shot. Then hold down the Set button and press one of the numbered
preset buttons.
To clear a preset:
Press and hold the Clr button while pressing the number of the preset you want
to clear.
Vaddio is a brand of Legrand AV Inc. ·
www.legrandav.com
Phone 800.572.2011 / +1.763.971.4400 · Fax +1.763.971.4464 · Email
Europe, Middle East,
Africa:
av.emea.vaddio.support@legrand.com
All other regions: av.vaddio.techsupport@legrand.com
Vaddio is a registered trademark of Legrand AV Inc. All other brand names or
marks are used for identification purposes and are trademarks of their
respective owners. All patents are protected under existing designations.
Other patents pending. ©2023 Legrand AV Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>