NURZVIY HC48-14-50 Home EV Charger User Manual
- June 13, 2024
- Nurzviy
Table of Contents
NURZVIY HC48-14-50 Home EV Charger
Product Information
In the Box
User Manual
Home EV Charger
(with NEMA 14-50/6-50 Plug)
3″ Screw M10 x 60| | 4″ Screw M5 x 20|
---|---|---|---
3 Wall Anchor| | 1 Shaped Wrench|
1* RFID Card| |
Product Overview
Appearance of Home EV Charger
Product Function
- Swipe card and remote control: The charger can boot up by swiping card and remote control. It is equipped with rechargeable RFID card.
- Schedule charging: Can schedule the charging time according to their needs on the APP.
- Record: Users can query the historical charging record and expense record on the APP.
- Plug and play: Convenient charging, set to plug and play.
- With overload protection, over-voltage protection, under-voltage protection, and emergency stop functions.
Basic Parameters
Information Current | 32A | 48A |
---|---|---|
Working Voltage | AC90-260V | |
Rated Power | 7kW | 11kW |
Frequency | 60Hz | |
Connector | J1772 | |
Cable Length | 25.6 feet (7.8 m) | |
Input Cord | NEMA-6-50/ NEMA 14-50 | |
Input Cord Length | 19.6 inch (50 cm) | |
Input Wiring Schema | L1 (8 AWG) L2 (8 AWG) and Ground ( 10AWG THHN) |
L1 (6 AWG) L2 (6 AWG) and Ground ( 10AWG THHN)
Installation Mode| Wall Mounted
IP Rating| IP55
App Remote Control| Supported
Alarm Setting
-Level 1 Overcurrent setting -Default Value 55A
-Level 2 Overcurrent Threshold- Default Value 50A
Over-voltageAlarm- Default Value 285A
Under voltage Alarm Default Value 90V
---|---
Internet Access| Wi-Fi/Bluetooth
|
Working Humidity| 5%to95% RH
Cooling Way| Natural Air Cooling
Weight| 17.2 lbs. (7.8 Kg)
Dimensions| 13.78 x 8.27 x 5.51 Inch
( 350 x 210 x 140mm)
Compliance| FCC, UL Listed
Warranty Period| 2 Year
Installation and Charging
Installation Instructions
Step 1
Drill holes according to the 2 holes in the middle of the backplane.
Stap2
Hammer the M10 expansion tube into the wall hole.
Stap3
Use the screwdriver to fix the M 10 tapping screws to the backplane on the
wall.
Step4
Install the charger on the backplane on the wall.
Step 5
Lock the anti-theft screws on the side of the charger.
Charging Instructions
-
Insert the charging input to the power supply.
-
Insert the charging plug to the charging port.
-
Start by swiping card or APP control.
-
EV is in normal charging state.
-
Finish by swiping the RFID card or APP control.
-
Remove the charger and put it back in place.
Warning :
Nurzviy EV charger is a continuous load device. The circuit must be rated for
125% of the maximum load.
Circuit Rating | Max Load | Estimated Range per Hour | Plug-in |
---|---|---|---|
40A | 32A | 25 miles/40 km | Yes |
60A | 48A | 37 miles/58 km | Yes |
APP Functions
The NURZVIY app feature list
Simplify setup of your home EV Charger via Wi-Fi.
Track your usage and charging session history.
Schedule charging sessions.
Get alarms for increased safety.
Get Started
-
Sign up or sign in with Email.
-
Add device via auto-discovery.
-
Click “Start Charging” or schedual a charging.
Charging Tips on the APP :
Both Wi-Fi and Bluetooth connection available.
Make sure the bluetooth of mobile phone has been enabled while configuring Wi-
Fi.
Tip 1
Start to Charge Insert the charging plug into the charging port, click “Start
Charging”.
Tip2
Check Charging Record Up to 1,000 charging history can be stored offline, and
can be viewed on the APP when the network is restored.
Tip3
Alarm When the device fails to work, an alarm will be prompted, and you can
view the error info.
Tip4
Finish Charging After charging completed, click to tum off the power to finish
charging.
LED Indicator
Working State | Red | Green | Blue |
---|---|---|---|
Free | / | / | On |
Internet Connecting | / | / | Flash |
Charging | / | Flash | / |
Charging Complete | / | On | / |
Fault Alarm | On | / | / |
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest information available at the time of printing.
Nurzviy reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations.
Nurzviy will not be liable for any direct, special, incidental, indirect
damages or any economic consequential damages (including the loss of profits).
Nurzviy shall not be liable for any damage caused by force majeure such as
fire, typhoon, flood, earthquake or customer’s intentional negligence, misuse
or use under other abnormal conditions.
· Defect caused by the non-standard connectors is not compensable.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>