NURZVIY Discover 200 Portable Power Station User Manual
- June 12, 2024
- Nurzviy
Table of Contents
NURZVIY Discover 200 Portable Power Station User Manual
What’s in the Box
- **Discover 200
**
-
AC Adapter (DC 35135)
-
Cigarette Lighter Plug Cord
-
Car Cigarette Lighter Socket
-
User Manual
For your safety and benefit, please keep this manual handy for future
reference.
If there is any question, please contact us at
service@nurzviy.com.
ATTENTION!
-
This product is a US domestic specification. Please do not use it in other countries.
-
This product is not applicable to devices with rated power consumption above 200W and peak power consumption above 400W.
-
Use more than the specified power supply voltage may result in anaccident.
-
Please make sure that the rating of the appliance does not exceed the rating of the AC cable.
-
Please never disassemble or modify the product.
-
Please do not connect multiple power station in series. Please do not connect the AC input port of this product to the AC output port of other power station.
-
Please charge it within the ambient temperature range of 32℉ ~ 104℉.
The temperature outside this range will influence the performance andlife of the battery, and may also lead to leakage, fire, or explosion. -
If charging cannot be completed even if the specified charging time issubstantially exceeded, please stop charging immediately.
-
For equipment that meets the above conditions, special consideration needs to be given to the use of the system, the setup, operation, maintenance, management of emergency power generation equipment, etc.Our company is not responsible for the losses caused by the abovereasons.
Product Info
-
LED Flashlight*2
-
AC Button
-
USB-A Output
-
QC 3.0 18W
-
PD 30W Output
-
Flashlight Switch
-
Power Button
-
DC Output 180W
-
LCD Display
-
DC Input (Solar Panel Charging Input)
-
Cooling Fan
-
AC Outlet 200W (Peak 400W)
How to Recharge Discover 200
Charging from AC Wall Charger
- Plug the connector of the original AC adapter into the AC input port of this product.
- Insert the plug of the original AC adapter into the 110V socket.
- When LCD screen shows 100%, it means the product is fully charged.
Please unplug the charging adapter from the AC outlet in time.
[NOTE]
-
Be sure to use the original adapter included for charging.
-
Do not use the original adapter if it is damaged.
-
The original adapter might feel hot when charging.
Please do not keep touching. -
Do not use it in a high temperature area for a long time.
Charging from Solar Panel (Not Included)
-
Plug the DC input port on the solar panel (not included) into the product’s DC port with a DC cable. (Only solar panels equipped with a maximum PD 30W can be charged.)
-
Start charging. The LCD display lights up during charging.
-
The charge mark lights up and shows the remaining battery level as percentage.
-
When fully charged (100%), trickle charge keeps the battery fully charged.
Remove the charger from this unit and the outlet. -
Please unfold all panels to receive full direct sunlight. Weather and setting angle may affect the charging efficiency.
-
Please avoid bending or bumping the product.
-
Do not touch the front end of the cable with hands when charging.
[NOTE]
-
Charging with PD 30W solar panel (80W), it needs about 4 to 5 hours from 0％ to 100％ full charge.
However, it is a guidance for charging time under ideal condition. -
If the solar panel PD output is under 30W or lower, or the sunlight cannot meet PD 30W output requirement, the maximum input power of our portable power station will be the same as the maximum output power of the solar panel. The charging time will also increase due to the decrease in the output of the solar panel.
Charging from Car Charger (Included in Package)
- Insert the output plug of the car charger into the DC input port of this product.
- Connect the car charger plug to the car’s socket.
- The LCD display will light up when charging.
- When the screen number reaches 100%, the product is fully charged. Please unplug the car charger from the car’s socket in time.
[NOTE]
- It can be used for 12V car socket. Some models may not work.
- It cannot be used for 24V accessory sockets. In the case of low battery voltage on the vehicle side, the charger will detect the low voltage abnormality and may not work.
- Please make sure to connect the product to the cigarette lighter socket for charging after the car is started. It is prohibited to start the engine by connecting the cigarette lighter socket first.
AC Output
- Press and hold the power switch for 3 seconds to start the whole unit.
- Check the remaining battery level with a number (%). If the battery level is at 20% or less, please charge it.
- Please press and hold AC switch for 3 seconds. Then the AC output becomes ON.
- Connect the electrical plug to the AC outlet socket.
- When not in use, please unplug the appliance from AC output socket. Press and hold AC switch for 3 seconds to turn off AC outlet to save battery power.
[NOTE]
- The maximum power of AC output is 200W. Even if the total connected power of multiple devices is less than 200W, depending on the connected electrical appliances, it may be impossible to use this unit due to exceed surge power.
- Even for appliances with a rated output of 200W, there are cases where some products exceed 200W.
- If the machine detects an overload condition or a short circuit and cannot be removed power, please press and hold the power switch for 3 seconds to turn off the power.
- The output power frequency of this product is 60Hz and cannot be switched to 50Hz.Please make sure that the power frequency of the connected appliance corresponds to 60Hz before connecting, or the malfunction may occur.
- Press and hold the power switch to start the whole unit. In the AC output off mode, the power will automatically turn off if it is not operated for 3~5 minutes.
- After turning on the AC switch, even if the unit is in the non-connected state, the AC output is always on, and the display will also show the battery balance directly in real time.
- To suppress the unnecessary power consumption, please press and hold the AC switch for 3 seconds to turn off the AC output.
DC Output
- Press and hold the power switch for 3 seconds to turn on the whole unit first, then short press the power switch to turn on/off the DC output.
- Check the remaining battery level with a number (%). If the battery level is at 20% or less, please charge it.
- In the DC output, DC output mode is displayed on the LCD screen.
- Please connect the device to the DC output port.
[NOTE]
- The DC output is the voltage of the internal battery (12-16.8V).
- Depending on the electrical equipment, it may be energized after connection.
- When the DC output is turned on, the DC output will remain output while the device is disconnected, and the display screen will display the remaining battery level in real time, please press the power switch once to turn off the DC output.
USB Output
Equipped with 4 USB output ports, the USB-C port supports PD up to 30W 15V/2A,
and the QC 3.0 port supports up to 18W 12V/1 .5A output. Other USB-A output
ports are standard 10W 5V/2.1A.
- Connect a USB device to the USB output port.
- Check the remaining battery level with a number (%). If the battery level is at 20% or less, please charge it.
- During output, the USB output mode is displayed on the LCD display. If there is no load for 3~5 minutes, the power station will be turned off automatically.
[NOTE]
- The maximum Type-C PD output power is 30W.
- Charging according to the PD standard requires that the connected device supports the USB Power Delivery standard. If the device does not support it, it will be charged at 5V2A 10W.
- If the device such as iPhone cannot be charged, please recon nect the charging cable.
LCD Display
Since Discover 200 is equipped with an LCD flashlight, it can be used for outdoor activities or emergency.
Press and hold the LCD switch for 3 seconds to turn on the LCD flashlight.
Each time you press it briefly, the lighting mode switches as follows.
Weak mode -> Strong mode -> SOS mode -> Blinking mode-> off.
In any mode, you can turn off the flashlight by press and hold the LCD switch
for 3 seconds.
Security and Maintenance
- Do not short-circuit the unit. To avoid short-circuiting, keep the unit away from all metal objects (e.g., coins, hairpins, keys, etc.).
- Do not heat the unit, or dispose of it in fire, water or other liquids. Keep away from high temperature. Do not expose the unit to direct sunlight.
- Keep away from high humidity or dusty places.
- Do not disassemble or reassemble this unit.
- Full charge the unit at least once every 3 months.
- Take it to a qualified service person when it requires repairing or service.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not cover the device with towels, cloth, or other item.
- It is normal that the unit may become hot when charging.
- Do not charge the unit over the required time.
- Disconnect the unit when fully charged.
- Do not drop or stack anything on top of the unit either in storage or in use.
- Use the unit properly to avoid electronic shock.
Technical Specifications
- Model: Discover 200
- Battery Type: Lithium Ion Battery
- Battery Capacity: 42000mAh/155Wh
- Frequency: 60Hz (Modified Sine Wave)
- Rate Output Power: 200W (Peak 400W)
Input
- DC Input:
AC Charger: 15V/2A 30W
Car Charger: 12V/2A
Solar Panel: 12V~24V/2A 30W
Output
- *2AC Output;** 100V~200V 200W (400W Max)
- *2USB Output:** 5V/2.1A Max
- *1QC3.0 Output:** 5V/2A, 9V/2A, 12V/1.5A
- *1Type-C Output:** 5V/2A, 9V/2A, 12V/2A, 15V/2A Max PD 30W
- *3DC Output:** 5.5mm 12V~16.8V/10A
Charging Time
- AC Charger: 7~8 hrs
- Car Charger: 8~9 hrs (12V/2A)
- Solar Panel: 8~9 hrs (80W solar panel charging is recommended)
- Lifecycles: ＞500 Times
- Charging temperature: 32℉~104℉(0~40℃）
- Working Temperature: 32℉~104℉(0~40℃）
- LED Light: 3W, 4 Light Modes (Weak, Strong, SOS, Blink)
- Size: 6.7 x 4.1 x 4.5 in (17.0 x 10.5 x 11.5 cm)
- Weight: 3.3 lbs (1.5 kg)
Warranty and Contact
Nurzviy warrants that the product will not have defects that affect the use of the product due to workmanship and materials under normal use; this warranty statement sets forth the full and exclusive warranty obligations of the product, and we will not assign or authorize anyone to undertake it for us or any other liability with respect to the products we sell.
Warranty Period
The warranty period for Discover 200 is 24 months. In each case, the warranty
period is measured starting on the date of purchase by the original consumer
purchaser. The sales receipt from the first consumer purchase, or other
reasonable documentary proof, is required to establish the start date of the
warranty period.
How to Get Warranty Service
To get warranty service, please contact our customer service through
service@nurzviy.com or call +1 408 400 3805,
thank you!
Disclaimer
- Our company is not responsible for any failure or damage caused by fire, earthquake, wind, lightning, other natural or geological disasters, public hazards, abnormal voltage, or other external factors.
- Our company is not responsible for any damage caused by non-compliance with the contents of the user guide.
- Our company is not responsible for any damage (business interruption, loss of profit, etc.) caused by the using of this machine or the inability to connect with other equipment.
- Please replace the power station immediately if its life expectancy has expired. If you continue to use it, it may cause damage.
Nurzviy Energy, Inc.
+1 408 400 3805
4555 GREAT AMERICA PKWY 5TH FL SANTA CLARA, CA 95054 UNITED STATES
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>