FOCAL T3Y Series Tesla Car Specific Audio Speaker User Manual
- June 13, 2024
- FOCAL
Table of Contents
FOCAL T3Y Series Tesla Car Specific Audio Speaker
Product Information
The T3Y is a high-fidelity loudspeaker system manufactured by Focal-JMlab. It is designed to deliver rich, pure, and true sound reproduction for any style of music. The system includes a midrange tweeter, woofers, and a crossover for optimal sound performance. The speakers are built with high-quality components such as a cone, voice coil, and motor surround to ensure durability and reliability.
Product Usage Instructions
- Positioning : To optimize the performance of the T3Y loudspeakers, it is recommended to place them in the dedicated OEM locations as shown in figures 1 and 2 of the user manual.
- Assembly: Follow the assembly instructions provided in the user manual for safe and proper installation of the loudspeakers.
- Connection: Connect the loudspeakers to an audio source or amplifier using appropriate cables or connectors.
- Power: Ensure that the power supply to the amplifier or audio source is turned off before connecting or disconnecting the loudspeakers.
- Volume Control: Adjust the volume level of the amplifier or audio source according to your preference.
- Listening Experience: Enjoy the rich, pure, and true sound produced by the T3Y loudspeakers for an immersive audio experience.
Note: For warranty registration and additional information, please visit the Focal-JMlab website at www.focal.com/garantie.
Specifications
IW T3Y 200
- Type 2 woofers kit
- Max. power 150W
- Nom. power 75W RMS
- Sensitivity (2.83V/1m) 91dB
- Frequency response 40Hz – 1,500 Hz
- Impedance 4Ω
- Woofer 8″ (200mm)
- Depth 11/4″ (31mm)
- Cone Flax®
- Voice coil diameter 11/2″ (38mm)
- Motor Neodymium
- Surround Butyl
ICC T3Y 100
- Type Central speaker kit
- Max. power 100W
- Nom. power 50W RMS
- Sensitivity (2.83V/1m) 87dB
- Frequency response 150Hz – 20kHz
- Impedance 4Ω
- Midrange 4″ (100mm)
- Tweeter Aluminium inverted dome
- Depth 13/8″ (33.8mm)
- Cone Flax®
- Voice coil diameter 1″ (25mm)
- Motor Neodymium
- Surround Butyl
- Crossover Integrated
IMPORTANT SAFETY INSTRUCTIONS!
Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned and relating to the handling, operation and maintenance of the device.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all the instructions.
- Do not use this device near water.
- After unpacking the product, make sure the packaging is kept out of the reach of children. It poses a suffocation risk.
- Never use chemical products or abrasive detergents to clean the device. Clean with a dry cloth only.
- Do not obstruct ventilation openings, as this may alter the sound quality of the device.
- Do not install or store the device in the engine compartment or near a heat source.
- During storage, the device should not be exposed to temperatures below -20°C or above 80°C. The operating temperature range for the device is between -10°C and 50°C.
- Ensure you leave a 5cm space around the device to allow heat exchange.
- Never place or leave metal objects, such as coins or metal tools, in the device as they could damage the speaker.
- If the product emits smoke or an unusual smell, immediately turn off the power supply (turn off the ignition and remove the key) and stop using it. Contact your retailer as soon as possible.
- Do turn on any function likely to distract you when driving. Any actions or adjustments that require more in-depth attention must only be made when the vehicle is at a complete stop. There is a risk of accident.
- Do not listen to the loudspeakers at a high volume, so that you can hear external noise when driving.
- Only use accessories recommended by the manufacturer.
- If cords or connectors are supplied, use them properly as described in the user manual without substituting them or modifying them.
- If the kit or connector includes a fuse, it must only be replaced by a fuse of the same rating.
- Do not pinch or damage the device or vehicle electric cables.
- All maintenance tasks should be performed by a qualified professional. Maintenance is required in case of any kind of damage to the device (damaged cable or plug, spillages or objects inserted into the device, exposure to rain or humidity, if the device malfunctions or overturns, etc.).
- After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is working safely.
- When replacement components are needed, make sure that the maintenance technician uses the components recommended by the manufacturer or components with exactly the same technical features as the original product. Using non-compliant components could cause fires, electric shocks or other risks.
- If a subwoofer is installed in the vehicle, it is essential to secure it by attaching it solidly. We recommend to attach the enclosure to the floor or chassis of the vehicle for safety. If it is not properly secured, it could become a projectile in the event of an accident. This is even more important if the subwoofer is installed in a hatchback, a station wagon, a utility vehicle or a van.
- Some users who are not self-sufficient enough to use the product on their own without danger. In particular, children under 14 or people with some types of disabilities must be supervised and/or accompanied when using the device.
- To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing.
The methods of installing and mounting loudspeakers to any surface (vehicle floor or chassis) depend on the conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
To facilitate the Focal-JMlab warranty, it is now possible to register your product online at: www.focal.com/garantie
- Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.
- For your safety, follow the assembly instructions provided in this user manual.
Equipment required
- Drill (10mm drill bit);
- Hex screwdriver;
- Torx screwdriver;
- Ultra-flat key with torx bit (total height approx. 1 cm);
- Plastic door trim removal tool.
Important recommendations
These speaker drivers have been designed to be fitted in the factory location. Check that there is sufficient space between the speaker driver and the protective grille.
- Keep the speaker drivers clear of any metal shavings and dust particles during the cutting process.
- Clean thoroughly before fitting the speaker drivers.
- Ensure that there are no objects positioned across the grille, as this could damage the speaker drivers.
- For the electrical disconnection, use the connector. Do not pull on the wires.
- Unclipping and reclipping the various parts must be done carefully.
- Excessive force may damage them.
Product positioning
- The loudspeakers in the range have been designed to deliver the most faithful sound reproduction for any style of music. Nonetheless, a few simple rules should be followed to optimise their performance and to guarantee good tonal balance and a realistic sound image. We recommend placing the speaker drivers from the kit in the dedicated OEM locations (fig. 1 and 2).
Installation
The wiring method for the speakers in the IS T3Y 100 kit depends on the
configuration of your car (see tab.).
- V1 : No tweeter connection in the car (fig. A)
- V2: Tweeter not activated, Tweeter connector in footwell(fig. B)
- V3: Wired tweeter (fig. C)
- Identify the location of your midranges, as well as your tweeters, in the case of a 2-way component kit.
- Carefully disconnect and disassemble the original speakers.
- Fit the Focal speakers into the vehicle’s factory locations, then connect them.
| FIG. A| FIG. B| FIG. C
---|---|---|---
Midrange| ×| ×| ×
Tweeter| ×| ×| ×
T1| ×| ×|
Filter| ×| ×| ×
T2| ×| |
Installation details may vary depending on the model (see tab.). We recommend watching our online assembly tutorials. To improve the performance of your system and eliminate parasitic sounds, we advise you to use the “B.A.M.” acoustic insulation kit sold by Focal.
SPECIAL PRECAUTIONS
-
Door trims
Once the door trim has been removed, it must not be placed on the floor. It must be placed on a raised surface to avoid damaging it or damaging the cables. -
Dashboard
When fitting the screw receivers, be careful not to drop the screws. This does not pose any particular risk, but it will be difficult to find them again. If you need replacement screws, these are self-tapping screws 5mm in diameter and 15mm long (M5x15). -
Footwell
Be careful not to touch any wiring other than that required. The crossover must be kept in the footwell only.
When reassembling the footwell, make sure to replace the trim correctly so that it covers the seal.
Maintenance
To care for the IW T3Y 200, ICC T3Y 100, IS T3Y 100 and IC T3Y 100 speaker
drivers, simply dust using a dry cloth. If the grille is marked, use a damp
duster. Never use solvents, detergents, alcohol or corrosive products,
scrapers or scouring utensils to clean the surface of the speaker drivers.
Running-in period
The IW T3Y 200, ICC T3Y 100, IS T3Y 100 and IC T3Y 100 speaker drivers used
are complex mechanical components that require a running-in period to operate
at their best. This running-in period varies depending on the conditions in
question and may take several weeks. To reduce this time, operate the speaker
drivers for about 20 hours at a moderate volume. Once the speaker drivers’
characteristics have fully stabilised, you will be able to enjoy the
performance of your products to the full.
Warranty terms and conditions
All Focal loudspeakers are covered by warranty drawn up by the official Focal
distributor in your country. Your distributor can provide all details
concerning the conditions of warranty. Warranty cover extends at least to that
granted by the legal warranty in force in the country where the original
purchase invoice was issued.
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the technical specifications of its products without prior notice. Where required, any images shown are for illustrative purposes only, and may differ slightly from the products sold.
Parts Overview
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed
of with other household wastes. To prevent any risk to the environment or
human health, please recycle them responsibly to encourage the reuse of
material resources. To return your used device, please use the return and
collection systems available, or contact the retailer where you purchased the
product. They can recycle this product safely.
Pour installer
- To set up your Focal Inside product, please watch online the installation video.
- www.focal.com/focal-inside/videos/
Check Online Updated Compatibility list and installation manual.
www.focal-inside.com
References
- Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
- Extension de garantie | Focal
- Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>