Kmart 43283873 Shelby Floor Lamp Instruction Manual
- June 13, 2024
- Kmart
Table of Contents
SHELBY FLOOR LAMP Item no.: 22F458 Keycode: 43283873
IMPORTANT SAFETY INSTRUCTIONS:
The following safety precautions should always be followed, to reduce the risk of electric shock. personal Injury or lire. It 10 cad all or thew In arm Huns corrally before ‘dug the product. nod In sas r them for name alarm e or Ur% 11,41•.
- This product iliml only be used as intended in accordance with the enclosed operating instructions
- Do not carry the appliance by the mains cable or pull the cable to remove the Oa from the socket.
- CAUTION Electric shock hazard If the nietual flexible cable a cad of thrs lummatre is damaged. it shall be exclusively replaced by the inanufacnua or Ins service anew on similar qualified person in order to avoid a hazard.
- If the lamp woos unexpectedly or appears to inal filiation. unplug from the mains and mop using inntadiatcly Seek professional advice to ratify the fault or make repairs.
- Switch of the power supply or unplug flan the mains socket what row 111 use_ before clearriag or changing acceowtics
- Avoid positioning the lamp Mare the power cable might be accidentally tapped or damaged.
- Keep the lamp and cable away from sources of beat. than objects of anything that may cause damage.
- Ensue the lamps switched OFF before C01111671111$ to the Hiatus poste supply
- Pc swam that some surfaces may become hot Do nor touch hot surfaces and supers Ise whets accordingly
- This product has not been designed for use by children
- Children should be closely supervised at all times when they are near any electrical appliance.
- To protect against electric shock, never allow the lamp. the mains cable or plug to come into contact with water a any other hand
- Neva reach for any appliance that has fallen uno water. Switch off the power supply at the ‘tams immediately and unplug Do not re-use until the product has teen inspected and approved by a qualified electrician
- Always ensure Out hands are dry before operating a adjusting any switch an the product or touching the plop and mains supply connections
- To chwounect fiat C1PAYV Out all controls ate in the OFF position. then retinae the plug from the electricity supply
- Man Mena keep all mutilation slots. filters. etc incensed and clear of debris. Never drop or 12,411 objects into the oPentaP.
- Do not use outdoors. This lamp has been designed for domestic indoor use only.
• DO NOT STAM)( LEAN SIT ON THIS FLOOR LAMP WITH SHELF.
• DO NOT 1.0AD MORE MAN MOS ON THE SMALL SHELF (C).
• DO NOT LOAD MORE THAN 51(O• ON DIE IARORE SHELF (0)
• DO NOT KM:JCR OR DRAG THE PRODUCT
• DO NOT USE THE SHELF UNLESS ALL DOLTS AND scREINS ARE FIRMLY SECURED.
ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING:
- Carefully read all instructions for the assembly and me of this product before connecting to an electricity supply.
- Use only the recommended bulb rating. as detailed on the lamp bolder and a label
- Never use a bulb that is rated more than the recommended capacity.
- Light bulbs become very hot to seconds Do not attempt to touch the bulb while the lamp is la and supeivise others accordingly.
- Before cleaning 01 replacing a defective bulb. mach off Ore tame and taping from the mains socket Allow the bulb to cool foe at least I0 minutes before touching it and mains the change.
- Ensue the new bulb is secure in the holder before recounectua to the power
- If in doubt. consult a qualified electrician.
Product Speelflesakr:
- Rated Voltage: 220.240V – KHz
- Bulb requires: Alas 25W E27 Edison Screw (Nor Included) 7 – 9W LED recommended for 11214hU111 brightness
INSTRICUTIONS FOR INSTAIIATION
Caution: Assemble the lamp completely before carnet ling to the electricity supply
- Fix pole (411) on the Lamp holder (B) lira, then fix 2pcs poles (E) to the residual position
- Put the small shelf (C) through the wire and fix it on the installed leg.
- Follow step l&2 to load the large shelf (TN. use poles (T)
- Follow step 1 use poles (0).
- Loosen the socket ring .
- Install the lampshade (A) to the lamp holder and lock the socket ring.
- Install the bulb Max 25W 1.27 (not included) into the I amp Hoick,
- Check to aware that all the components have been assembled correctly. 10. Connect to the main supply,
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively. via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mtigrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>