AVteck KA6 Slim Profile Full Motion Wall Mount Instruction Manual
- June 13, 2024
- AVteck
Table of Contents
AVteck KA6 Slim Profile Full Motion Wall Mount
Product Information
The 32 to 75 Slim Profile Full Motion Wall Mount (Model: T-KA6) is a wall mount designed to securely hold TVs ranging from 32 to 75 inches in size. It allows for full motion adjustment, including tilt and pan, to provide optimal viewing angles. The mount comes with all the necessary hardware for installation, including screws, fixtures, spacers, washers, and a tilt/pan adjustment tool. Please note that this wall mount is not suitable for outdoor installation.
What’s Included
- Wall Assembly Hardware: V, I, Q, R
- VESA Assembly Hardware : X, Y, Z, C1, D1
- Screws: E, D, F, G, H
- Spacers: M, N
- TV Attachment Hardware: O, P, Washers, HI, J, K
- Tilt/Pan Adjustment Tool: S
- Cable Management System: HC
Product Usage Instructions
Step 1: Wall Assembly
- Mark the drill area on the wall using a pencil.
- If installing on a brick or concrete wall, use the provided drill bit (4 mm) to drill holes. Insert wall assembly hardware (V, I, Q, R) into the drilled holes and tighten securely.
- If installing on a drywall wood stud, use the provided drill bit (4 mm) to drill holes. Insert wall assembly hardware (V, I, Q, R) into the drilled holes and tighten securely.
Step 2: VESA Assembly
- Identify the VESA pattern of your TV. If your TV’s VESA is 100×100, 200×100, or 200×200 mm, use parts X, D, E, F, M, N, J, K, or I for assembly. If your TV’s VESA is 300×200 or 400×200 mm, follow the provided diagram for assembly using parts X, Y, Z, C1, D1, J, K, or I.
- Attach the VESA assembly hardware (C1, D1) to the back of your TV using the appropriate screws and spacers.
Step 3: Attach VESA Assembly to TV
- Align the VESA assembly with the wall assembly and secure them together using the provided screws (E, D, F, G, H), spacers (M, N), and washers.
Step 4: Attach TV to Wall Assembly
- Carefully lift your TV and align it with the wall assembly.
- Attach the TV to the wall assembly using the provided TV attachment hardware (O, P, HI, J, K), ensuring a secure fit.
Tilt/Pan Adjustment
- Use the tilt/pan adjustment tool (S) to adjust the viewing angle of your TV after installation. Tighten the nuts on both ends to secure the desired tilt angle. For leveling the TV horizontally (pan adjustment), tighten the nuts after making the necessary adjustments.
- For further assistance or if you have any doubts regarding the installation process, it is recommended to consult with an installer or a qualified dealer.
- For more information, visit www.texonic.ca
Please Note:
- Drill holes into the wall with the recommended depth and diameter. The installation equipment supplied is suitable for a wide range of wall types; however before mounting it, please ensure they are suitable for your wall structure. If you have any doubts regarding the installation process, advise with an installer or a qualified dealer.
- The supplied screws and fixtures are set to suit most TVs on the market but they may not be suitable for your TV so please ensure to check before proceeding with the installation.
- If the diameter, pitch, and length of the screws do not fit the requirements of the television, new ones will need to be purchased. This wall mount is not suited for outdoor installation.
- Thank you for your purchase!
www.texonic.ca
What you need
What is included
make sure all hardware is inside before proceeing with the installation
Step 1: WALL ASSEMBLY
WALL ASSEMBLY HARDWARE
Step 2: VESA ASSEMBLY 
VESA ASSEMBLY HARDWARE
Step 3: ATTACH VESA ASSEMBLY TO TV 
Step 4: ATTACH TV TO WALL ASSEMBLY 
Tilt/Pan Adjustment tool
Brick or Concrete Wall Installation Steps
Drywall Wood Stud Installation Steps
- If your TVs VESA is 100×100, 200×100, 200×200 mm. You only need to use X
- If your TVs VESA is 300×200 or 400x200mm. Please follow the diagram.
- If your TVs VESA vary between 300×300 to 600x400mm, You need to use parts X, Y, & Z
Wall assembly to VESA plate
Cable management system
Tilt Adjustment
- After tilt adjustment.
- Tight both ends of the nuts to secure it in place
Pan Adjustment
After pan adjustment (Levelling the TV) tighten the nuts