PRONOMIC DX-50 USB MKII DJ-Mixer mit USB Recording User Manual
- June 5, 2024
- PRONOMIC
Table of Contents
DX-50 USB MKII DJ-Mixer mit USB Recording
User Manual
Important safety instructions
- To protect against personal, third-party, or device damage read the following safety instructions and keep it at home for future reference.
- To avoid damage or electric shock this equipment must be protected from dripping or splashing water and submersion. If water has penetrated pull the mains plug immediately and remove any existing batteries.
- Do not place the device near heat sources such as heaters, stoves, or other heat-radiating objects.
- Avoid mechanical shocks and check the unit regularly for damage to housing, power plugs, and other accessories.
- Use only the accessories and attachments provided and approved by the manufacturer.
- A repair may only be carried out by qualified personnel. Unauthorized modification can affect safety and function.
- Listening at high volumes over a long period of time can lead to impaired hearing.
- The device or packaging may contain small parts that may be swallowed by children or cause suffocation.
- This device contains magnetic materials. If necessary ask your doctor about possible effects on implants such as pacemakers or defibrillators.
Frontpanel
-
CUE-SELECT (pre-fader listening) (1) for MIC, CH1, CH2, USB CHANNEL.
-
The MIC LEVEL (2) control adjusts the volume of the microphone signal.
-
CHANNEL 1-FADER (3) adjusts the channel volume of channel 1.
-
The PHONO1/LINE1 SWITCH (4) selects the input level for line or phono devices. The PHONO setting is used for turntables. For all other signal sources, i.e. a CD or MP3 player, use the “LINE” setting.
-
CHANNEL 2-FADER (5) adjusts the channel volume of channel 2.
-
The PHONO2/LINE2 SWITCH (6) selects the input level for line or phono devices. The PHONO setting is used for turntables. For all other signal sources, i.e. a CD or MP3 player, use the “LINE” setting.
-
CHANNEL 3-FADER (7) adjusts the channel volume of channel 3.
-
Input selection for channel 3: With the LINE3/LINE4 switch (8) you can select the cinch inputs 3 or 4 of the audio source.
-
CHANNEL USB FADER (9) adjusts the volume of the USB/MP3/BT player.
-
The MONO/STEREO SWITCH (10) switches between mono and stereo
-
POWER SWITCH (11) for switching the unit on and off.
-
POWER SUPPLY LED (12).
-
OUTPUT METER (13): Indicate the levels of the left and right master channels.
-
USB PORT (14) for connecting a USB flash drive.
-
CONTROL BUTTONS (15) for adjusting USB/MP3/BT player functions.
-
The PHONES LEVEL KNOB (16) controls the volume of the headphone’s signal.
-
The CROSSFADER (17) is used to fade between channels 1 and 2.
-
MIC TALKOVER (18) turns the talkover-function on or off.
-
REC LED (19) indicates when recording is in progress.
Backpanel
-
POWER SUPPLY (20): Please use only the power adapter provided with the device.
-
Use the MASTER OUT (21) to connect the unit to an amplifier. The level is controlled by the resulting mix of the channel faders.
-
The MIC1 INPUT (26) connector is a 6,3mm jack for microphone connection.
-
The MIC2 INPUT (27) connector is a 6,3mm jack for microphone connection.
-
6,3 mm HEADPHONES STEREO JACK (28) allows you to connect your headphones.
USB/MP3/Bluetooth-Player
USB Play mode
•Press the RECE button until Status LEDs display LED1=0N/LED2=OFF. The USB
storage device is placed into a USB socket. Each press of the PLAY BUTTON
causes the operation to change from play to pause or from pause to play
•PREV/NEXT button: Use this button for the previous/next track. The track will
fast backward/ forward play if press and hold the button for more than 3
seconds.
Bluetooth (BT) mode
•Press the REC button until Status LEDs display LED1=FLASH/LED2=OFF. The BT-
•Player is searching for a connection. The device has the memory of a
connection from the past. Under BT mode PLAY/ PREV/NEXT functions can be used
on DJ-Mixer or on your smartphone.
•Each press of the PLAY button causes the operation to change from play to
pause or from pause to play.
•PREV/NEXT button: Use this button for the previous/next track. The track will
fast backward/ forward play. The volume of the Bluetooth audio signal will
turn down/up if press PREV/NEXT on the DJ mixer and hold the button for more
than 3 seconds.
Record mode
•Long Press the REC button until the display shows LED2=0N. The USB storage
device is placed into a USB socket, the device is ready for the record.
•Each press of the REC button changes between record and stopping a record.
Every time when you stop recording the MP3 file will be stored on the USB
storage device. After stopping the record, the recorded track will be started
automatically.
•By pressing the REC button, the recorded files will be played (use NEXT to
change to the next recorded file). This function will play only files in the
RECORD folder.
Specifications
MIC 1 & MIC 2 sensitivity ……………………………………………………………. 1.5 mV (10 K ohms)
PHONO sensitivity …………………………………………………………………………. 3mV (47 K ohms)
LINE/CD sensitivity ……………………………………………………………………. 150 mV (22 K ohms)
MASTER OUTPUT …………………………………………………………. nominal 775 mV MAX 1.5 V
Frequency Response …………………………………………………………………… 20Hz-20KHz ±2dB
Talkover attenuation …………………………………………………………………………………….. －12dB
Headphone output ……………………………………………………………………………. 300mV/32ohms
Bluetooth frequency…………………………………………………………… 2402-2480 MHz
Max. Transmission Power……………………………………………………. ……..… < 20mW
WEEE Declaration
Your product is designed and manufactured with materials and components of
high quality, which are recyclable and can be reused. The symbol means that
your product should be disposed of separately from household waste when it
reaches its end of life. Please dispose of this equipment at your local
collection point or recycling center.
Please help to protect the environment in which we all live. All
specifications and appearances are subject to change without notice. All
information was correct at the time of printing. Musikhaus Kirstein GmbH does
not guarantee the accuracy or completeness of any description, photograph, or
statement contained in this manual.
Printed colors and specifications may vary slightly from product. Products
from Musikhaus Kirstein GmbH are only sold through authorized dealers.
Distributors and dealers are not agents of Musikhaus Kirstein GmbH and have
no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual
is protected by copyright. Any copying or reprint, even in excerpts, is only
allowed with the written consent of Musikhaus Kirstein GmbH. The same applies
to the reproduction or copying of images, even in altered form.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Musikhaus Kirstein GmbH declares that the radio
Equipment type [Pronomic DX-50 USB] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.kirstein.de/docs/Konformitaetserklaerung/CE_Konformitaetserklaerung_00059208.pdf
Musikhaus Kirstein GmbH
Bernbeurener Str. 11
86956 Schongau – Germany
Telefon/Phone: 0049-8861-909494-0
Telefax/Fax: 0049-8861-909494-19