TCP Smart SMAWISSINWMONITOR Smart Energy Monitoring Plug User Guide
- June 13, 2024
- TCP Smart
Table of Contents
TCP Smart SMAWISSINWMONITOR Smart Energy Monitoring Plug User Guide
Specifications:
Dimensions: 55 x 55 x 58 mm
Rated Power: AC 185-250V
Fuse: 13 Amp
IP Rating: IP20. Indoor use only
WiFi: 2.4 GHz
Warranty: 2 Year Warranty
Cautions & Warnings:
The manufacturer provides warranty in accordance with the legislation of the
customer’s own country of residence, with a minimum of 1 year, starting from
the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service
centre. When making a claim under the warranty, the original bill of purchase
(with purchase date) must be submitted. The warranty will not apply in cases
of:
Normal wear and tear. Use of force, damage caused by external influences.
Misuse e.g. connection to an unsuitable mains supply. Partially or completely
dismantled appliances.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical &Electronic Equipment)This marking shown on the product
indicate that it should not be disposed with other household wastes at the end
of it is working life.
Please separate from other types of waste and recycle responsibly. If in
doubt, please contact your local recycling centre for details of where and how
this item can be safely recycled.
Functions:
Monitoring your device’s energy usage can help with making cost-effective
decisions on how and when to use your appliance, or even if there is a need to
replace with more energy-efficient models.
To start monitoring the Kilowatt usage and cost of an electrical device please
read the below instructions, set up the necessary information into the Smart
Energy Monitoring Plug App and plug your electrical device into the Smart
plug.
TCP hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU and
2011/65/EU. Full declaration can be viewed at tcpi.eu.
App Install Instructions:
01. Download the TCP Smart App from the App Store or Google Play.
Log in or set up an account using the on screen
prompts.
If the Plug is not automatically detected or if the installation fails the
Plug can be put into set-up mode by holding down the power button on the side
for 5 seconds or until you hear the click.
The blue light should now flash rapidly and the steps above should be
followed.
Smart Home Assistant
TCP Smart products work with Amazon Alexa, Google Nest & Siri Shortcuts.
For further information on connecting to smart home assistants visit
https://www.tcpsmart.eu/faq/
We are social, check us out!