TEXONIC T-CX3T Tilt Wall Mount Instruction Manual
- June 13, 2024
- TEXONIC
Table of Contents
TEXONIC T-CX3T Tilt Wall Mount
Product Information
Product Name: Tilt Wall Mount Model Number: T-CX3T Supported VESA
Sizes: 200×200, 300×300, 400×200, 400×400, 600×400 Maximum Weight Capacity:
70kg (110lbs)
Manufacturer: Texonic Website: www.texonic.ca
Product Usage Instructions
- Before installation, ensure that you have all the necessary components and tools mentioned in the manual.
- Identify the mounting holes on the back of your TV and determine the appropriate VESA size.
- Select the appropriate set of screws (M-A, M-B, M-C, M-D, M-E, M-F, M-G, M-H) Based on the VESA size and TV weight.
- Attach the brackets A and B to the back of your TV using the selected screws.
- Determine the desired location for mounting the wall mount and mark the positions for drilling holes.
- Install the wall plate C using appropriate screws and anchors suitable for your wall type. Ensure that it is securely attached.
- Attach the brackets A and B (with the TV) to the wall plate C using the provided screws.
- Adjust the tilt angle of the TV as desired by loosening or tightening the tilt adjustment screws on the brackets.
- Once the desired tilt angle is achieved, tighten all screws securely to ensure stability.
- Connect any necessary cables to your TV before finalizing the installation.
- Double-check all connections and make sure everything is secure.
- Test the stability of the mounted TV by gently applying pressure in different directions. 13. Enjoy your newly mounted TV!
Note: It is recommended to seek professional assistance if you are unsure about any part of the installation process or if you have any concerns regarding the suitability of your wall for mounting.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
TOOLS REQUIRED
INSTALLATION
CAUTION
- Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on wood stud walls, solid concrete walls, or brick walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE
Check that the bracket is secure and safe to use at regular intervals at least every three months)