TEXONIC AUDIO CS75B Wall Mount Speaker Instruction Manual
- June 1, 2024
- TEXONIC AUDIO
Table of Contents
TEXONIC AUDIO CS75B Wall Mount Speaker
thank you for choosing our products for your audio needs. We’ve carefully designed it with our client’s best interests in mind, aiming to provide nothing but the finest. Our aspiration is that it matches your expectations. Your feedback is invaluable to us. Feel free to share your experience with our products & services by leaving a review on our website.
Feel free to reach out if you have any questions or concerns. We’re happy to help!
Dimensions
Specifications
Installation
Understand your installation surfaces:
STEP 1
Dracket them the speaker. Next, use the mounting bracket as a point of
reference to indicate where the screws should be positioned.
STEP 2
Drill holes according to your anchor’s size in the marked areas, there should
be a 5.66″(144mm) distance between the two holes as a reference point.
STEP 3
Carefully insert anchors after drilling.
STEP 4
Secure the mounting bracket to the surface using screws to the anchor.
STEP 5
Connect audio cables to the speaker’s rear before mounting it.
STEP 6
Secure the mounting bracket to the speaker using the two screw-type bolts.
STEP 7
All Done! Adjust the speaker angle according to your preferences. Now enjoy
the audio setup!
Please note this unit can be installed vertically or horizontally.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>