WaterH SERIES3 Smart Water Purifiers Bottle User Manual
- June 13, 2024
- WaterH
Table of Contents
WaterH SERIES3 Smart Water Purifiers Bottle
Conquer Hydration
-
Auto Accurate Tracking
No need to guess or log manual entries. The sensor inside WaterH automatically tracks your exact level of hydration. -
360° LED Hydration Reminder
Subtle reminder so you stay hydrated all day. Customize reminder preference and frequency in the app. -
Intelligent display
When drinking water, it can immediately display the amount of drinking water and the degree of completion of drinking water goals. No need to check APP data all the time -
Motivational Quote
Smart bottle screen and WaterH APP displays motivational messages to encourage users to drink more water
Days may vary depending on your drinking habits.
Getting Started
In Your Package
-
Step l – Charging
Take the Series 3 bottle and connect it to the TYPE C charging cable. Then plug the TYPE C into any TYPE C wall charger until fully charged. -
Step 2 – Cleaning
Wash lid and body thoroughly before first use. -
Step 3 – Enjoy
Fill the bottle with water and enjoy
The Mobile APP
Hydration intake is precisely tracked for you in the app
- No need to manually log water consumption or make your own calculations.
- No more kicking yourself for forgetting to log an entry and lose track.
- No more guessing whether you’ve had enough water.
For a full WaterH experience, scan the QR code and download the WaterH app via the App Store or Google Play Store.
-
Step l – Create Account
In the WaterH app, register for an account. -
Step 2 – Bring Your Phone Near Your WaterH Bottle
Click the button in the upper right corner of the WaterH app. -
Step 3 – Pair Device
Click “Connect” in the WaterH app to begin pairing. WaterH bottle will display a solid blue LED light.
Step 4 – Complete Setup
Touch using your finger, the touch screen on the WaterH lid. Confirm successful pairing by checking your WaterH app for a display message “Connect Successful”.
Care Instructions
- To prevent buildup or residue,thorouhly dry prior to use or storage. Store with cap removed.
- The stainless steel body is dishwasher safe.
- The lids is hand wash or use a damp cloth.
- Rinse lid and stainless steel body after each use with the lid in the open position.
Display & Grow
You’re officially all set!
Display Modes
Light Modes
Water consumption data is automatically synced from your WaterH bottle to the WaterH app when devices are in close prioximity (16 feet/ S meters) of each other.
FCC warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protec- tion against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if notinstalled and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable syposure condition without restriction.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC warning:
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two condition
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation o the dovice
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning
DO NOT:
- Microwave, freeze or boil.
- Use with carbonated or pulpy beverages.
- Use cleaners containing bleach,chlorine, abrasives.
- Continue to use if product is damaged. Overfill Fill liquids below the threads to avoidaccidental spilling.
- Force the Lid open with tools of any kind.
- Use with dry ice, explosion can occur.
WaterH warranty excludes damages caused by negligence, accident, abuse, alteration or modification.
IMPORTANT: This product is not suitable or intended for use by children.
This product contains small parts and may otherwise be hazardous to small
children, especially children under 3 years old. Keep product and any
dangerous equipment, including those using batteries, out of the reach of
small children!
WaterH. All rights reserved. Designed in Canada. Manufactured in China,
Headquarters in Toronto, Ontario.
Hydrate to Help Others
WaterH is committed to helping people worldwide hydrate easier and safer. That
is why a portion of our proceeds will go directly to our water charity parter
Water.org. When you support WaterH, you help those in need
gain access to safe drinking water.
Tell the World!
We’re proud of our product and to be part of your journey towards achieving
hydration wellness! Tag or mention us on Instagram and we’ll post it!
@enjoywaterh #DrinkConfidently
Customer Service
Have a specific question?
Reach out to us directly at service@waterh.com
FAQ
Got questions? We have answers.
Visit our FAQ at www.waterh.com/faq
www.waterh.com