MAGICSHINE SEEMEE 150 Smart Bike Light Combo Instruction Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
SEEMEE 150 TWINPACK
**USER MANUAL
**
ACCESSORY/STRUCTURE
HOW TO INSTALL
CHARGING/POWER INDICATOR
When the light is off,click the switch to activate battery indicator for 3
seconds.
CHARGING
Charging : Flash red
Fully charge : Constant green for 3 minutes
POWER INDICATOR
0%-10% : Flash red
11%-20% : Constant red
21%-100% : Constant green
OPERATION INSTRUCTIONS
When the brake sensor is on,the taillight will enter to the sleep mode after 5
minutes of inaction and auto activated on any vibrations.
When the brake sensor detects braking,the taillight will light up with maximum
output.
The brake sensor is not included in the front light.
TURN THE BRAKE FUNCTION ON :
When the light is off , press and hold the switch for 3s until the light
lights up constantly at highest output.
TURN THE BRAKE FUNCTION OFF : When the light is off , press and hold the
switch for 3s until the light keeps flashing quickly at highest output.
ON/OFF : Press and hold the switch to turn the light on/off , the default
output is the last mode when turned off.
CHANGE MODE : When the light is on , single click the switch to cycle through
Low-High-Flash-Group RideSmart-Low…And the front light is without smart mode.
MEMORY FUCTION : Mode memory features will save the last selected brightness
level automatically.
LOW POWER MODE : When the remaining battery power is low , the switch starts
flashing and the lighting mode changes to ECO mode. The brake function is
disabled during this period.
OUTPUT/RUNTIME
e SEEMEE 150 TL| MODE| LOW| HIGH| FLASH| GROUP
RIDE/ECO| ‘s SMART
---|---|---|---|---|---|---
DAY| NIGHT
OUTPUT(LM)| 8| 45| 45/0| 8/0| 150/0| 45/8
RUNTIME
(HH:MM)| 27:00| 5:40| 16:20| 44:00| 13:10| 12:30
SEEMEE 150 FL| MODE| LOW| HIGH| FLASH| ECO
OUTPUT(LM)| 45| 150| 150/0| 8/0
RUNTIME (HH:MM)| 5:30| 2:10| 5:30| 31:40
WARNING
All performance measurements in accordance with ANSI/NEMA FL1-2009 Standard.The tests are performed indoors under a room temperature of 25 degrees Celsius with 25KM/H wind conditions.
The runtime may vary depending on the external temperature and ventilation
conditions,and these biases may affect the results of testing.
The stated runtime of each mode excludes the brake function. When the brake function is on,the runtime will vary depending on the frequency of braking.
Tel: (+86) 755-295 536 69
Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order from
Magicshine.com online store)
service@magicshine.com (order from other
sales channels)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>