MAGICSHINE Seemee 200 V2 Best Bike Tail Light User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
SEEMEE 200 V2.0 USER MANUAL
ACCESSORY/STRUCTURE
HOW TO INSTALL
CHARGING/POWER INDICATOR
When the light is off,click the switch to activate battery indicator for 3
seconds.
Charging: Flash red
Fully charge : Constant green for 3 minutes
Standard charging time approx 1.5 hrs (5V 1A)
POWER INDICATOR
0%-10% : Flash red
11%-20% : Constant red
21%-100% : Constant green
OPERATION INSTRUCTIONS
When the brake sensor is on,the taillight will enter to the sleep mode after 5
minutes of inaction and auto activated on any vibrations.
When the brake sensor detects braking,the taillight will light up with maximum
output.
Turn the brake function on:
When the light is off , press and hold the switch for 3s until the light
lights up constantly at highest output.
Turn the brake function off:
When the light is off , press and hold the switch for 3s until the light keeps
flashing quickly at highest output.
ON/OFF:
Press and hold the switch to turn the light on/off , the default output is the
last mode when turned off.
CHANGE MODE:
When the light is on , single click the switch to cycle through Low-High-
Flash-Group Ride-Smart-Low…
MEMORY FUCTION:
Mode memory features will save the last selected brightness level
automatically.
LOW POWER MODE:
When the remaining battery power is low , the switch starts flashing and the
lighting mode changes to ECO mode. The brake function is disabled during this
period.
360°TRACING LIGHT:
The 360 tracing light is controlled by the light sensor. It will be off during
the daytime. At nighttime , it flashes in constant mode and lights up
constantly in flash mode and smart mode.
OUTPUT/RUNTIME
| MAIN LIGHT| TRACING LIGHT| RUNTIME (DAY)| RUNTIME
(NIGHT)
---|---|---|---|---
LOW| 10LM| 60-0LM| 27h| 4h50min
HIGH| 60LM| 60-0LM| 5h| 3h40min
FLASH| 60-0LM| 60LM| 17h| 10h50min
GROUP RIDE| 10-0LM| 60LM| 50h| 6h30min
SMART (DAY)| 200-0LM| 0LM| 26h| /
SMART (NIGHT)| 60-10LM| 60LM| /| 4h30min
WARNING
All performance measurements in accordance
with ANSI/NEMA FL1-2009 Standard.The tests are performed indoors under a room
temperature of 25 degrees Celsius with 25KM/H wind conditions.
The runtime may vary depending on the external temperature and ventilation
conditions,and these biases may affect the results of testing.
The stated runtime of each mode excludes the brake function. When the brake function is on,the runtime will vary depending on the frequency of braking.
Tel: (+86) 755-295 536 69
Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order from
Magicshine.com online store)
service@magicshine.com (order from other
sales channels)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>