MAGICSHINE SEEMEE 300 Rear Light User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE SEEMEE 300 Rear Light
SAFETY PRECAUTION
WARNING
WHAT’S IN THE BOX
-
Seemee 300
-
Saddle mount
-
Type C Charging Cable
-
Seat post mount
OPERATION INSTRUCTIONS
When the brake sensor is on, the taillight will enter to the sleep mode after
5 minutes of inaction and auto activated on any vibrations.
When the brake sensor detects braking, the taillight will light up with
maximum output.
Turn the brake function on:
When the light is off, press and hold the switch for 3s until the light lights
up constantly at highest output.
Turn the brake function off:
When the light is off, press and hold the switch for 3s until the light keeps
flashing quickly at highest output.
ON/OFF:
Press and hold the switch to turn the light on/off, the default output is the
last mode when turned off.
CHANGE MODE:
When the light is on, single click the switch to cycle through Low-High-Flash-
Group Ride-Smart-Low …
MEMORY FUCTION:
Mode memory features will save the last selected brightness level
automatically.
LOW POWER MODE:
When the remaining battery power is low, the switch starts flashing and the
lighting mode changes to ECO mode. The brake function is disabled during this
period.
OPTITRACING LIGHT:
The OptiTracing light is controlled by the light sensor. It will be off during
the daytime. At nighttime, it flashes when the main light is in constant mode,
and lights up constantly when the main light is flashing.
OUTPUT/RUNTIME
| MAIN LIGHT| OPTITRACING LIGHT| RUNTIME (DAY)| RUNTIME
(NIGHT)
---|---|---|---|---
LOW| 20LM| 20-0LM| 60h| 40h
HIGH| 1 OOM| 100-0LM| 8h| 6h
FLASH| 100-0LM| 60LM| 45h| 7h
GROUP RIDE| 20-0LM| 20LM| 200h| 5Oh
SMART (DAY)| 300-0LM| OLM| 35h| I
SMART (NIGHT)| 100-20LM| 60LM| I| 6h
All performance measurements in accordance with ANSI/NEMA FL 1-2009 Standard. The tests are performed indoors under a room temperature of 25 degrees Celsius with 25KM/H wind conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the resuIts of testing.
The stated runtime of each mode excludes the brake function. When the brake function is on, the runtime will vary depending on the frequency of braking.
CHARGING/POWER INDICATOR
When the light is off, click the switch to activate battery indicator for 3 seconds.
Charging: Flash red
Fully charge: Constant green for 3 minutes.
Standard charging time approx 2hrs(SV 1 A).
POWER INDICATOR
21%-100%: Constant green
11 %-20%: Constant red
0%-10%: Flash red
HOW TO INSTALL
Scheme 1:
Scheme 2:
Documents / Resources
|
MAGICSHINE SEEMEE 300 Rear
Light
[pdf] User Manual
SEEMEE 300 Rear Light, SEEMEE 300, Rear Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>