MAGICSHINE ME 2000 Smart E-Bike Light User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE ME 2000 Smart E-Bike Light
Product Information
The ME 2000 is an intelligent bike light with various modes and brightness
levels. It features a mode memory function that resumes the previous mode upon
the next usage. The light also has a brightness sensor that automatically
switches between daytime running light and steady/flash mode. It comes with a
power button and a light sensor for easy operation.
Accessory/Structure
- 1 x ME 2000 bike light
- 1 x 3mm Hex key
Power Matching Instructions
- Long press the button on the bottom of the light (under power off situation)
- Power on the E-bike
- Wait for the light to work from minimum brightness to maximum brightness and then turn off
- Power on the E-bike again to complete power matching successfully
Mode and Brightness
| MODE | BRIGHTNESS | MAX LUMENS |
|---|---|---|
| STEADY NIGHTTIME | HIGH | 2000 |
| FLASH | MID | 1000 |
| DRL (DAYTIME RUNNING LIGHTS) | LOW | 600 |
20 (DRL lights are always on during the
daytime)
How to Install
- Attach the light to the bike using the provided accessories
- The light will automatically adjust its maximum brightness According to the output power of the motor interface
- Refer to the table below for the corresponding maximum brightness values based on motor output
| MOTOR OUTPUT (W) | HIGH (LM) | MID (LM) | LOW (LM) |
|---|---|---|---|
| 3W | 300 | 150 | 80 |
| 6W | 750 | 350 | 170 |
| 7.2W | 880 | 400 | 200 |
| 9W | 1100 | 550 | 260 |
| 18W | 1800 | 900 | 450 |
| 24W | 2000 | 1000 | 600 |
Product Specifications
- Light Output: 2000 lumens
- Beam Distance: 220m
- Peak Beam Intensity: 12100cd
- Impact Resistance: 1m
- Waterproof Rating: IPX6
Product Usage Instructions
- Ensure the light is properly installed on the bike.
- Before first use, power match the light with the E-bike following the provided instructions.
- To turn on the light, press the power button once. The light will automatically activate the daytime running lights (DRL) during the day and the last used mode during the night.
- To switch between modes, single-click the power button. The available modes are steady nighttime, flash, and DRL.
- To adjust the brightness level, single-click the power button. The available brightness levels are high, mid, and low.
- To activate the maximum brightness based on the motor output, no further action is required.
- To turn off the light, press and hold the power button for a few seconds.
Note: The light will remember and keep the same brightness as the last used setting when restarted.
ACCESSORY/STRUCTURE
Button and light sensor
Button: For choosing the modes and brightness levels.
Light perception
Smart light sensors will judge whether to open the main light according to the
light environment. Only the DRL will be turned on during the daytime once
powered on.
Notice light effect
The light needs to match power with the new e-bike before first using it to
reach the maximum
- The light defaults to the minimum power state from the factory setting.| A Instructions for power matching
- Long press the button on the bottom of the light(Under power off situation)
- Power on the E-bike
- Wait for the light to work from min brightness to max brightness to turn off.
- The power match successfully powers on the E-bike again.
HOW TO INSTALL
INTELLIGENT OPERATION
Mode memory: The light resumes the previous mode upon the next usage. The brightness sensor is activated by default, it automatically switches between daytime running light and steady/flash mode.
Notice The light will remember and keep the same brightness as the last used setting when restart
MODE AND BRIGHTNESS
The light can judge the maximum brightness automatically according to the output power of the motor interface
| MOTOR OUTPUT (W) | HIGH(LM) | MID(LM) | LOW(LM) |
|---|---|---|---|
| 3W | 300 | 150 | 80 |
| 6W | 750 | 350 | 170 |
| 7.2W | 880 | 400 | 200 |
| 9W | 1100 | 550 | 260 |
| 18W | 1800 | 900 | 450 |
| 24W | 2000 | 1000 | 600 |
The data above is only for reference
WARNING
WARRANTY
The Magicshine lighting system is warranted for 24 months from the date of
purchase. If you register the lighting system on the Magicshine website you
will receive a bonus 6-month warranty. Battery packs and AC adapters have a
6-month warranty, however, There is no bonus warranty available. The warranty
is limited to defects in material and workmanship on the lighting system
itself, the battery pack, and the AC adapter. The warranty is only valid if
the affected parts have not been tampered with and there is no intentional
damage. Please keep your proof of purchase in a safe place. Proof of purchase
must be presented in the event of any claim. Please contact the specialist
retailer from whom you purchased the device for a complaint or warranty claim.
Alternatively, you can send your complaint or claim directly to Magicshine at
Tel: (+86) 755-295 536 69
Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order from
Magicshine.com online store)
service@magicshine.com (order from other
sales channels) In the event of a justified warranty claim and delivery of a
replacement device, you will only be entitled to a model available when
replacing it.
The manufacturer retains the right to make technical modifications
References
- Best Bike Lights for Night Riding - Magicshine Store
- Best Bike Lights for Night Riding - Magicshine Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>