MAGICSHINE RAY 2600 Smart Remote Bike Light User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE RAY 2600 Smart Remote Bike Light
Product Information
The Ray 2600 is a bicycle light system by Magicshine. It comes with various accessories and features a rechargeable battery. The light has different lighting modes and brightness levels, providing a maximum brightness of 1300 lumens. It is built to withstand impact and is waterproof with an IPX6 rating. The light has a beam distance of 183 meters and a peak beam intensity of 8400cd.
Included Accessories/Structure:
- Remote control
- Handlebar mount
- Gopro mount
- Aero bar compatible strap
- Type-C USB Cable
- 3mm Hex
Battery Indicator:
The power button light indicates the battery level when the device is powered on. When the device is powered off, a short press of the power button activates the indicator light, which automatically shuts down after 2 seconds.
Lock Mode:
To prevent potential damage, it is important to put the bicycle light in lock mode. This protects the switch from being pressed accidentally. To lock the light, when it is off, press and hold the power button for 5 seconds until the indicator light flashes red. To unlock, when the light is locked, press and hold down the power button for 5 seconds until the indicator light remains constant red.
Switching the Lighting Mode:
- Single click: Power on/off
- Double-click: Switch between different lighting modes
Lumens/Run Time:
The Ray 2600 offers different brightness levels and run times for each lighting mode:
| Mode | Brightness (Lumens) | Run Time |
|---|---|---|
| ECO | 170 | 22 hours 56 minutes |
| LOW | 330 | 11 hours 45 minutes |
| MID | 650 | 4 hours 7 minutes |
| HIGH | 1300 | 2 hours 12 minutes |
Optional Parts:
- Helmet mount
- TTA front mount
Warranty:
The Magicshine lighting system comes with a 24-month warranty from the date of purchase. Registering the lighting system on the Magicshine website adds an additional 6-month warranty. The warranty covers defects in material and workmanship for the lighting system, battery pack, and AC adapter. Proof of purchase must be presented for any warranty claim. Contact the specialist retailer from whom the device was purchased or directly reach out to Magicshine for complaints or warranty claims.
Product Usage Instructions
How to Recharge:
To recharge the Ray 2600, follow these steps:
- Connect the Type-C USB cable to the charging port of the light.
- Connect the other end of the cable to a power source or a compatible external charging cable (sold separately).
- The indicator light will flash red during the charging process.
- Once fully charged, the indicator light will turn green.
- Standard charging time is approximately 2.5 hours with an 18W charger.
Phone Charging Instruction:
The Ray 2600 can also be used to charge a phone. Connect the phone to the
light using a compatible charging cable.
Note: An external charging cable may need to be purchased additionally.
How to Install:
To install the Ray 2600 on your bicycle, follow these steps:
- Attach the handlebar mount securely on the handlebars.
- Slide the Ray 2600 onto the handlebar mount until it clicks into place.
- For alternative mounting options, use the Gopro mount or the aero bar compatible strap.
Light Output Precaution:
Do not cover the light screen when the power is on to ensure proper
functioning and prevent damage.
Note: This response is provided based on the information available and
may not cover all aspects of the product. For further assistance, refer to the
complete user manual or contact Magicshine directly.
ACCESSORY/STRUCTURE
HOW TO INSTALL
BATTERY INDICATOR
When the device is power-on, the power button light will indicatethe battery level. When the device is power-off, short press the power button to activate the indicator light (light will shut down automatically after 2 seconds).
HOW TO RECHARGE
PHONE CHARGING INSTRUCTION
External charging cable needs to be purchased additionally
LOCK MODE
To prevent potential damage from high heat or even fire, it is very important to put the bicycle light in lock mode and protect the switch from being pressed. MAGICSHINE will not be held responsible for damages to person or property resulting from a failure to follow the ‘lock’ mode instructions.
To lock
When the light is off, press and hold the power button down for 5 seconds
until the indicator light flashes red.
To unlock
When the light is locked, press and hold down the power button for 5 seconds
until the indicator light constant red.
SWITCHING THE LIGHTING MODE
Hold 1s power button to turn on/off
-
MODE MEMORY FUNCTION : When you turn the light on, it lights up in the last lighting mode you used.
-
MODE SELECTION : In standby mode, press the up/down button at the same time to enter mode selection. Press the up button to select smart mode(constant blue) or press the down button to select normal mode(flash blue).
Press the up/down button at the same time to confirm the selection mode. -
SMART MODE-LIGHT SENSOR : The light sensor monitors ambient light to adjust light output accordingly. During daytime, light’s output automatically switches to dual beam with 40lumens.When entering a tunnel or shortly after sun down, light’s output automatically switches to original setting within seconds.
-
SMART MODE-VIBRATION SENSOR : An integrated vibration sensor detects the end of a ride and automatically turns off the light after 3 minutes. Any further movement will turn the light back on.
LUMENS/RUN TIME
OPTIONAL PARTS
*Adaptable accessories (sold separately)
WARNING
Don’t cover the light screen when the power is on
WARRANTY
- The Magicshine lighting system is warrantied for 24 months from the date of purchase.
- If you register the lighting system on the Magicshine website you will receive a bonus 6 month warranty.
- Battery packs and AC adapters have a 6 month warranty, however, there is no bonus warranty available.
- The warranty is limited to defects in material and workmanship on the lighting system itself, the battery pack and the AC adapter.
- The warranty is only valid if the affected parts have not been tampered with and there is no intentional damage. Please keep your proof of purchase in a safe place. Proof of purchase must be presented in the event of any claim. Please contact the specialist retailer from whom you purchased the device for complaint or warranty claim.
Alternatively, you can send your complaint or claim directly to Magicshine at
- Tel: (+86) 755-295 536 69
- Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order
from Magicshine.com online store)
service@magicshine.com (order from other
sales channels)
In the event of a justified warranty claim and delivery of a replacement device, you will only be entitled to a model available when replacing. The manufacturer retains the right to make technical modifications.
ANSI FL 1 STANDARD
Documents / Resources
|
MAGICSHINE RAY 2600 Smart Remote Bike
Light
[pdf] User Manual
RAY 2600 Smart Remote Bike Light, RAY 2600, Smart Remote Bike Light, Remote
Bike Light, Bike Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>