Apulsetech α811 RFID Handheld Reader User Guide
- June 13, 2024
- Apulsetech
Table of Contents
α811 RFID Handheld Reader
Product Information
Product Name: Apulsetech RFID Handheld Reader
(Model 811)
Version: 1.0
Manufacturer: Apulsetech Co.,Ltd.
Trademark: Apulsetech (registered)
Copyright: Copyright 2017. Aplusetech Co.,Ltd.
All rights reserved.
Software: The device comes with software for
user understanding and application development. All software,
including firmware, is licensed and copying it in whole or in part
to other devices is not permitted, except as permitted under
copyright law.
Address: C-1211, 60, Haan-ro, Gwangmyeong-si,
Gyeonggi-do, Republic of Korea
Website: http://www.apulsetech.com
Table of Contents
– Copyright Revision History
– About this guide
– Configuration
– Firmwrae Upgrade
– Connectivity
– Accessories
– Troubleshooting
– Specifications
Product Usage Instructions
About this guide
Introduction: The 811 (RFID Smart Reader)
provides the highest quality RFID reading performance with default
or optional features, including WiFi, Bluetooth, 2D scanner, 3G,
Camera, NFC. With Android OS, users are able to experience
efficient working performance.
Purpose: This guide is designed to help users
operate the 811 effectively. It is important to read the guide
carefully before using the device.
Configuration
This section provides information on the different
configurations available for the Model 811 RFID Handheld
Reader.
Firmware Upgrade
This section provides instructions on how to upgrade the
firmware of the 811 RFID Handheld Reader.
Connectivity
This section provides information on how to connect the 811 RFID
Handheld Reader to Wi-Fi and Bluetooth devices.
Accessories
This section provides information on the docking cradle and
leather case accessories available for the 811 RFID Handheld
Reader.
Troubleshooting
This section provides troubleshooting tips and solutions for
common issues that may arise when using the 811 RFID Handheld
Reader.
Specifications
This section provides detailed specifications of the 811 RFID
Handheld Reader.
811
RFID Handheld Reader User Guide
Ver. 1.0
Copyright
Copyright 2017. Aplusetech Co.,Ltd. All rights reserved.
Change Date
Description
Apulsetech is the manufacturer of Apulsetech RFID handheld computers. This
document and related software in this device are protected by international
copyright laws. Any part of this document may not be reproduced, removed or
used in any form by any means, without permission in writing from Apulsetech.
The contents in this manual is subject to change without prior notice.
Apulsetech and 811 are registered trademarks of Apulsetech Co.,Ltd., all other
trademarks and copyrights are property of their respective owners.
The software is provided for user understanding how to use the device and application development. All software, including firmware, is on a licensed basis. No right to copy a licensed program in whole or in part is granted, to other device except as permitted under copyright law.
Apulsetech Co., Ltd.
C-1211, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, Republic of Korea
http://www.apulsetech.com
RFID at your service
Revision Histo2ry| 36
Ver.1.0
RFID at your service
3 | 36
Table of Contents
Copyright Revision History 1 About this guide
……………………………………………………………………………………………………………. 7
1.1 Introduction ……………………………………………………………………………………………………………. 7 1.2
Configuration ………………………………………………………………………………………………………… 7 1.3 Related Document
and Software …………………………………………………………………………………. 7 1.4 Service Information
………………………………………………………………………………………………….. 7 1.5 Safety Information
…………………………………………………………………………………………………… 7
2 Brief Description of 811 ………………………………………………………………………………………………… 8 2.1 Packing
Contents ……………………………………………… ! . 2.2 811 Overview …………………………………………………. ! . 2.3
811 Accessories ……………………………………………………………………………………………………. 12 2.4 Button
functions ……………………………………………………………………………………………………. 16 2.5 811 Use and
Preparation ………………………………………………………………………………………… 13 2.6 811 Home Screen
…………………………………………………………………………………………………. 13 2.6.1 Status
Bar……………………………………………………………………………………………………. 16 2.6.2 Status Icons
…………………………………………………………………………………………………. 16 2.6.3 Notification Icons
………………………………………………………………………………………….. 16
3 Getting Started……………………………………………………………………………………………………………. 16 3.1
Setup…………………………………………………………………………………………………………………… 16 3.1.1 Installing and
Replacing a MicroSD card ……………………………………………………………… 16 3.1.2 Installing and
Replacing a MicroSIM card …………………………………………………………….. 16 3.1.3 Installing and
Replacing the Battery…………………………………………………………………… 16 3.1.4 Boot and Shut down
………………………………………………………………………………………. 16 3.1.5 Charging the Battery
……………………………………………………………………………………… 16 3.1.6 Charging Indicators
……………………………………………………………………………………….. 16 3.1.7 Battery
Management……………………………………………………………………………………… 16 3.2 General
Settings…………………………………………………………………………………………………….. 16 3.2.1 Setting the date and
time ……………………………………………………………………………….. 16 3.2.2 Display setting
……………………………………………………………………………………………… 16 3.2.3 Sound
setting……………………………………………………………………………………………….. 16 3.2.4 Using Keybord
……………………………………………………………………………………………… 16 4 | 36
RFID at your service
3.2.5 Firmwrae Upgrade…………………………………………………………………………………………. 16 3.3
Connectivity………………………………………………………………………………………………………….. 16
3.3.1 Wi-Fi ………………………………………………………………………………………………………….. 16 3.3.2 Bluetooth
……………………………………………………………………………………………………. 16
4 Applications ……………………………………………………………………………………………………………….. 25 4.1 Installing & Uninstalling Apps ……………………………………………………………………………………. 25 4.2 Demo Apps …………………………………………………………………………………………………………… 26 4.2.1 UHF RFID Demo ……………………………………………………………………………………………. 16 4.2.2 Barcode Emulator …………………………………………………………………………………………. 16 4.2.3 GPS Test Plus……………………………………………………………………………………………….. 16 4.2.4 NFC Utill……………………………………………………………………………………………………… 16 4.2.5 Self-Diagnosis ………………………………………………………………………………………………. 16
4.3 Default Apps …………………………………………………………………………………………………………. 26 4.3.1 Browser
………………………………………………………………………………………………………. 16 4.3.2 Calculator
……………………………………………………………………………………………………. 16 4.3.3 Calendar
……………………………………………………………………………………………………… 16 4.3.4
Camera……………………………………………………………………………………………………….. 16 4.3.5 Clock
………………………………………………………………………………………………………….. 16 4.3.6 Contacts
……………………………………………………………………………………………………. 16 4.3.7
Downloads…………………………………………………………………………………………………… 16 4.3.8 Email
………………………………………………………………………………………………………… 16 4.3.9 ES File Explor
……………………………………………………………………………………………… 16 4.3.10 Gallery
…………………………………………………………………………………………………….. 16 4.3.11 ES File Explore
…………………………………………………………………………………………… 16 4.3.12 Music
………………………………………………………………………………………………………. 16 4.3.13 Phone
……………………………………………………………………………………………………… 16 4.3.14 Settings
…………………………………………………………………………………………………… 16 4.3.15 Sound Recorder
…………………………………………………………………………………………. 16 4.3.16 VideoPlayer
………………………………………………………………………………………………. 16
5 Wireless …………………………………………………………………………………………………………………….. 26 5.1 Local Area
Networks ……………………………………………………………………………………………….. 26 5.2 Bluetooth
…………………………………………………………………………………………………………….. 26 5.3 3G
………………………………………………………………………………………………………………………. 26 5.4 Near Field Comunications
………………………………………………………………………………………… 26
RFID at your service
5 | 36
6 Accessories ………………………………………………………………………………………………………………… 27 6.1 Docking
Cradle ………………………………………………………………………………………………………. 27 6.2 Leather Case
…………………………………………………………………………………………………………. 28
7 Settings …………………………………………………………………………………………………………………….. 31 7.1 Wi-
Fi……………………………………………………………………………………………………………………. 31 7.2 Bluetooth
…………………………………………………………………………………………………………….. 31 7.3 Data
usage……………………………………………………………………………………………………………. 31 7.4 More Settings
……………………………………………………………………………………………………….. 31 7.5 Display
………………………………………………………………………………………………………………… 31 7.6 Sound & notification
……………………………………………………………………………………………….. 31 7.7 Apps
……………………………………………………………………………………………………………………. 31 7.8 Storage & USB
………………………………………………………………………………………………………. 31 7.9 Battery
………………………………………………………………………………………………………………… 31 7.10 Memory
……………………………………………………………………………………………………………… 31 7.11 Users
…………………………………………………………………………………………………………………. 31 7.12
Location……………………………………………………………………………………………………………… 31 7.13 Security
……………………………………………………………………………………………………………… 31 7.14 Accounts
…………………………………………………………………………………………………………….. 31 7.15 Language &
input………………………………………………………………………………………………….. 31 7.16 Backup & reset
…………………………………………………………………………………………………….. 31 7.17 Date & time
…………………………………………………………………………………………………………. 31 7.18 Accessibility
………………………………………………………………………………………………………… 31 7.19
Pinting……………………………………………………………………………………………………………….. 31 7.20 Developer
options…………………………………………………………………………………………………. 31 7.21 About phone
……………………………………………………………………………………………………….. 31
8 Troubleshooting ………………………………………………………………………………………………………….. 32 Appendix 1
Specifications ………………………………………………………………………………………………… 34
RFID at your service
6 | 36
1 About this guide
1.1 Introduction The 811 (RFID Smart Reader) provides highest quality RFID
reading performance with default or optional features, WiFi, Bluetooth, 2D
scanner, 3G, Camera, NFC. With Android OS, users are able to experience
efficient working performance. This guide is designed for helping users to
operate 811 effectively. Please read the guide carefully before using 811. 1.2
Configuration This guide provides information of the following configurations
Model 811
1.3 Related document and Software 811 Quick Guide 811 SDK Manual 811 Firmware update manual 811 Demo application manual 811 UHF Demo app 811 Barcode Demo app
1.4 Service information If you have problem with the device, visit our web
site to analyze the problem or contact our partner in region or HQ. Contact
information is available at our website http://www.apulsetech.com When
requesting support, please have following information;
– Serial number of the device ( On manufacturing label ) – Firmware version
1.5 Safety information
Before you use the 811, please read this section of information and keep your
child aware of this
information. For detailed information, please refer to the safety guidelines.
Do not use 811 during driving for safety. In medical sites, please follow the
relevant regulations by turning off your 811 when you are in medical
RFID at your service
7 | 36
sites. Please turn off your 811 or turn on planes mode when you are boarding,
to avoid wireless signals jamming
aircraft control signal. Please turn off your 811 near the use of high
precision electronic equipment, otherwise it may lead to
electronic equipment disability. Do not take apart your 811 or accessories
without authorizing. Only authorized institutions can repair this
811. Please keep 811 away from magnetic equipment. The radiation of 811 will
erase the information of the
magnetic storage device. Please don’t use 811 under high temperature or in
flammable areas (example: gas station). Please keep your 811 and accessories
away from children without supervising. Please obey the relevant laws and
regulations when you use your 811, and respect others lawful rights
and privacy. Please obey the relevant specification of this manual when you
use USB cable. Otherwise it may damage
your 811 or personal computer. Modifying the device’s operating system or
installing software from unknown sources may cause device
malfunction or data loss. Improper or unauthorized use of the device is a
violation of the Bluebird license
agreement and void your one-year limited warranty.
Symbols
This guide uses the following symbols to indicate hazards and additional information.
Symbol
Name
Description
Warning
Implies information that could result in serious injury to yourself or others.
Caution Note
Implies information that may result in minor or serious product damage.
Implies information that can help you get more important than surrounding
text, such as exceptions or additional information.
2 Brief Description of 811
2.1 Packing Contents Your 811 packing box includes the following items
811 Device
RFID at your service
8 | 36
Quick guide Battery Hand strip Protective film
The illustrations may differ from your actual items. To purchase additional
accessories, contact your sales representative. You can download your User
Manual from www.apulsetech.com.
2.2 811 Overview 2.2.1 Top
No.
Item
1 2D Imager
2 Speaker
3 Power button
4 Earphone Jack
2.2.2 Front
Description Scans barcodes by emitting a red laser when you press the related
button.
Turns the device or screen on or off. You can lock the device by turning off
the screen.
RFID at your service
9 | 36
No.
Item
1 Touch screen
2 Menu Button
3 Receiver 4 Back Button 5 Home Button
6 Battery indicator
7 UHF RFID Reader 8 NFC Button 9 Back Button
Description
Displays apps and acts as a multi-touch interface.
Displays more option menus. If you tap and hold this button for a few seconds,
the apps you previously opened will be listed. Tap any app to open it.
Allows user to hear the person they are talking to while on the phone.
Returns to the previous page or menu.
Returns to the Home screen.
Indicates the status of the battery. The charging LED turns red when the
battery is charging and turns green when the battery is fully charged.
2.2.3 Back
RFID at your service
10 | 36
No.
Item
1 Camera
2 SiM Slot
3 Micro SD Card Slot
4 Hand Strap holder
5 Scan button
Flash
Description Takes photos and record videos (8Megapixel).
To attach hand strap for easy handle the device Illuminates your surroundings
when using the camera and related apps.
2.2.4 Bottom
RFID at your service
11 | 36
No.
Item
Description
1
Charging contacts Allows the device to be charged.
2
USB connect
Allows the device to be connected to PC or other device.
3
2.3 811 Accessories 811 provides optional items as below. Docking Cradle
Cradle Image front / Back
No.
Item
1
2
3
4
5
Description
RFID at your service
12 | 36
6 Leather Case Leather case Image front / Back
2.4 Button Functions
Key functions illustration:
Power key
Long press this button for booting In booting condition, long press this button pop-up shutdown options. In booting condition, press this button to turn off the screen
Home key Press this button to return to the function interface from arbitrary interface.
When the device is crash, use the small objects to short press RESET button,
device will
force to shut down. Reset button
Suggest don’t use the RESET button unless device unable to shut down normally.
Otherwise, it will easy to damage the device system.
2.5 811 Use and Preparation
2.6 811 Home Screen
811 operation mode There are several ways you can browse screen, menu and
application, etc on the 811. Click When you want to use the screen keyboard
for input, you can choose applications on the homepage as long as you click a
project with finger. Press If you want to open an available option (such as
the text box or web link) or move shortcut and main program menu on the
homepage as long as you press the items. Fast sliding or sliding
13 | 36
RFID at your service
Fast sliding or sliding said in his fingers making rapid vertical or
horizontal drag action. Drag Before you start to drag, you must use your
finger to press strongly on it for a short time. When dragging it to the
position you want, you can loosen your finger. Rotating For most pictures, you
can only turn to 811 then screen will translate from lateral direction to
straight. Such as in the input text, watch movies, etc.
2.6.1 Status Bar
2.6.2 Status Icons New instant messaging New email Matters to be handled Use
USB line to connect computer with 811 Music playing
Data synchronization
Insufficient SD card space WIFI service already connected network unavailable
No SD card Uploading/downloading Download is completed General notice (such
as: synchronization error) Flight mode Charging
More
Battery charging sign
2.6.3 Notification Icons
Please click column frame and slide to right on the screen to unlock notice
icon. Click the requisite view options and check the detailed information.
Later you can click the information box and slide to shut up the
14 | 36
RFID at your service
information windows. The icon illustration for status bar is as follows:
Notification icons in the status bar alert you to notifications, such as upcoming events, messaging, emails,
missed calls, data usage, and much more.
Icon
Description
Indicates that Airplane mode is active–you cannot make any calls, and other wireless functions are disabled.
Indicates that the battery is charging. Indicates that the battery is fully
charged.
Indicates that Bluetooth is on.
Uploading/downloading ? Indicates that flashlight is off Indicates that
flashlight is on Indicates that GPS is in off Indicates that GPS is in on.
More Indicates that music is playing Indicates that alarm is on Indicates that
Screen record is off Indicates that Screen record is on Indicates that Screen
shot Indicates that a picture is taken.
Indicates that USB connection is on Indicates that your device is connected to
a Wi-Fi network.
RFID at your service
15 | 36
Indicates that there is no Wi-Fi signal. No SD card Use USB line to connect
computer with 811
Notice panel Notice icon implies new messages, the settled alarm clock,
schedule, and SD card inserting etc. You can open the information panel to
check specific information by slide down the panel. Open notice panel When new
notice icons appear in notice bar, please hold notice bar and slide down to
open notice panel.
Other than the icons described in the table above, there are various other
notifications and status icons that are displayed on the status bar depending
on the situation. When the icons on the status bar are hidden, tap the status
bar on the screen to display icons temporarily. The appearance of icons may
vary depending on your region or network service provider.
3 Getting Started
3.1 Setup 3.1.1 Installing Replacing a MicroSD card
3.1.2 Installing and Replacing a MicroSIM card
3.1.3 Installing and Replacing the Battery
3.1.4 Boot and Shut down
Boot After long pressing for 2 seconds on the power button, you can see the
boot logo. The system access into screen locking status after opening, please
press the Power On/Off button to refresh, and slide up the unlock icon on the
screen. Power off 1. Long press the power On/Off button, then “Power off”
options pop up. 2. There is silent mode in device options, Power off and
Cancel. 3. Click Power off. Reset Press the reset button to reset the device.
It will clear the all data, please be careful with the function. (Note: you
can’t restart your device after the current reset function, your device can
only be turned off. You need to press the power button to restart the device
after reset.)
3.1.5 Charging the Battery
RFID at your service
16 | 36
3.1.6 Charging Indicators 3.1.7 Battery Management
3.2 General Settings 3.2.1 Setting the date and time 3.2.2 Display setting
3.2.3 Sound setting 3.2.4 Using Keyboard 3.2.5 Firmware Upgrade 3.3
Connectivity
3.3.1 Wi-Fi 3.3.2 Bluetooth
It will be closed during the screen idling. After idling period of time,
screen will be automatically closed to save the battery. When the screen is
on, you can press the power button to shut down the screen immediately. Tip:
if you need to find out how to set the screen timeout please refer to chapter
3.8.1. Opening in screen closed condition. When the screen is off, you can
long press Power On/Off button to activate it. Enter locked condition after
opening it, press “lock” icon and slide up for unlocking.
4 Applications
4.1 Installing & Uninstalling Apps You can purchase and download apps. On the
Apps screen, tap Store.
811 operation mode There are several ways you can browse screen, menu and
application, etc on the 811.
RFID at your service
17 | 36
Click When you want to use the screen keyboard for input, you can choose
applications on the homepage as long as you click a project with finger. Press
If you want to open an available option (such as the text box or web link) or
move shortcut and main program menu on the homepage as long as you press the
items. Fast sliding or sliding Fast sliding or sliding said in his fingers
making rapid vertical or horizontal drag action. Drag Before you start to
drag, you must use your finger to press strongly on it for a short time. When
dragging it to the position you want, you can loosen your finger. Rotating For
most pictures, you can only turn to 811 then screen will translate from
lateral direction to straight. Such as in the input text, watch movies, etc.
4.2 Demo Apps
4.2.1 Setting the date and time 4.2.2 Display setting 4.2.3 Sound setting
4.2.4 Using Keyboard 4.2.5 Firmware Upgrade
4.3 Default Apps 4.2.1 Setting the date and time 4.2.2 Display setting 4.2.3
Sound setting 4.2.4 Using Keyboard 4.2.5 Firmware Upgrade
4.4 Other Apps 4.2.1 Setting the date and time 4.2.2 Display setting 4.2.3 Sound setting 4.2.4 Using Keyboard 4.2.5 Firmware Upgrade
RFID at your service
18 | 36
5 Wireless
5.1 Local Area Networks 5.2 Bluetooth 5.3 LTE 5.4 Near Field Communications
6 Accessories
6.1 Docking Cradle 6.2 Leather Case The main menu screen shows all the
applications. You can use the application, set shortcuts and customize your
homepage interface wallpaper, etc.
7 Settings
RFID at your service
19 | 36
7.1 Wi-Fi 7.2 Bluetooth 7.3 Data usage 7.4 More Settings 7.5 Display 7.6 Sound
& notification 7.7 Apps 7.8 Storage & USB 7.9 Battery 7.10 Memory 7.11 Users
7.12 Location 7.13 Security 7.14 Accounts 7.15 Language & input 7.16 Backup &
reset 7.17 Date & time 7.18 Accessibility 7.19 Pinting 7.20 Developer options
7.21 About phone
8 Troubleshooting
8.1 Alarmk 8.2 Bluetooth 8.3 Bluetooth
In the main interface, you can management main interface software ICONS: long
press the icons for 3 seconds, after the icons become bigger, then you can
drag anywhere in the interface and loosen your finger.
20 | 36
RFID at your service
Delete icons long press the icons for 3 seconds, drag the icons to the top of
device PC while the icon turns red, loosen your hand, after that you can
delete icon.
3.6 Status bar describe The status bar is on the bottom of the screen. In the
lower center, display main interface software, home key, files running in the
background, reduce volume, increase volume, back key, Screenshot capture. In
the upper left corner, display USB connected, USB debugging connected, In the
upper right corner, current time, Wi-Fi signal strength, and battery charging
sign etc. 3.7 Use touch panel Device equipped with a 7 inch touch screen.
Following the main touch screen area is described and describes some of the
tips for how to use the touch screen. No matter which interface you are on the
screen, can go back to home page through pressing the soft home key on the
bottom icons. 3.8 Equipment basic settings Settings: Click settings icons ,
enter settings interface.
3.8.1 Silent mode, volume, notification, ringtone, audible selection, screen
lock sounds.
RFID at your service
21 | 36
3.8.2 Application Manage applications
Unknown sources: Click “Unknown Sources”, then click “OK”. Manage application:
manager and uninstall application. Remark: When you firmware upgrade, please
close the USB connect. How to uninstall?
1. Enter “Settings”>”Application”>”Manage application” and then there will be
installed the program list.
2. Click you want to uninstall icon, will enter the following interface. 3.
Click Uninstall, then you can delete the application.
3.8.3 Privacy
Restore to factory settings When there are great errors in your 811 or you forget the passwords, you can use Restore to factory
Settings to restore them to Initial State.
Methods:
On the homepage interface, press Menu key.
Click Settings.
Click Backup & reset.
Click Factory data reset.
Wait for the system to restart.
3.8.4 Storage Remove TF card, view of the available storage space.
RFID at your service
22 | 36
Remark: Please touch option “delete SD card”, so that can remove SD card
safety. 3.8.5 Language & Keyboard
Settings: Language, text input and automatic error correction options.
Select Language: 54 kinds of national languages are available. Remark: Android
system can support 54 kinds of languages, now menu interface just supports14
kinds of languages. Android keyboard: Android keyboard setting Sound on Key-
press Auto-capitalization, Gesture keyboard Show suggestions: Display
suggested words while typing. Auto-complete: Spec bar and punctuation
automatically insert highlighted word.
3.8.6 Date & time setting Set date, set time, select time zone and select date
format.
3.8.7 USB Mode Select Choose USB work pattern: OTG/HOST/SLAVE……..
3.8.8 About device
3.9 APPS install and uninstall 3.9.1 APPS install This Device can support Android APPS in market by third party, most APPS can install in network, can copy to NAND FLASH or SD card.
RFID at your service
23 | 36
Click ESFILEEXPLORE icon. It’s available for internal memory disk and SD card
disk. Select the APPS you would like to install, click APPS icon and select
“OK”, go back to main menu, it will display the installed app you just
selected. Remark: Some 3rd APP must install properly by memory card,
downloaded 3rd party app may not install properly on device. 3.9.2 APPS
uninstall Click Settings, choose Apps, select the Apps you would like to
uninstall then click “uninstall” —-click “OK” as follows:
3.10 Input text Use the screen keyboard When you start programs or select text
edit box which needs to input text or number, the screen keyboard will appear.
There is an optional input method of keyboard below: 1. Android keyboard 2.The
third party input methodThe user can install any input methods
independently Select the input method which you want to use. For pre-
installation, Android keyboard will be displayed when you want to input word.
- On the homepage interface, press menu button and click “Settings”. 2. Click
the Language& input. 3. List all installed input methods of 811 in the text
setup area. 4. Tick the input method you want. Use and switch input method 1.
On the text input interface, hold text edit box area until “edit text menu”
pop ups. Then click the input method. 2. Select the input method you want.
RFID at your service
24 | 36
4 Establish connections
4.1 USB connection 1. Use USB cable to connect 811 with computer. Notice
massage will appear in Notice bar. 2. Drag up the icon in the lower left
corner. 3. In the notification panel, click on the USB connected, then click
Turn on USB storage. 4. Then the USB connection will be done successfully.
4.1.1 Copy files to memory cards. 1. Use a USB cable to connect 811 with
computer. After setting the store setting, connect 811 with computer
successfully.
2. Open My Computer of your computer, “portable disk (x)” can be seen. 3.
Select the intended files and copy to the “portable disk (x)”.
4. After copying the files, click “safe deletion hardware” icon of your
computer task bar to unload.
4.1.2 Content of 811 Storage Device 1. NAND FLASH storage device, 811 itself
has 4G storage space for keeping files.
2. TF removable storage card. 3. The above mentioned two storage devices can
connect your
computer by using USB. Note: When you connect the USB cable with 811, enabling
the USB storage device, you will not get access to Internal Memory; If you
want to get access to Internal Memory, please disconnect the USB device. 4.1.3
Storage card Copy files to storage card You can transfer files between 811 and
computer such as music and pictures, etc. If you want to check the files,
please click the file browser, then you can browse the contents of the SD
card. Delete the files on the 811 memory card.
1. Select the file you want to delete. 2. Click the file you need to delete,
then the file menu will popup. 3. Click “delete”
RFID at your service
25 | 36
4.2 WIFI connection You can connect 811 to Wi-Fi network: 1. In the homepage
interface, click the MENU button, then settings menu will
pop up. 2. Click settings. 3. Click wireless and network. 4. Drag Wi-Fi to
“ON”. 811 will automatically scan available Wi-Fi networks. 5. Choose the Wi-
Fi network you prefer. If it is private Wi-Fi network, then the
password having been set should be input.
4.3 3G connection
5 Communication 5.1 E-MAIL E-mail Settings E-mail applications accompany with
email settings guide, it can add the common Web email service providers (e.g.
Gmail, Yahoo, Hotmail etc) except for POP3 or IMAP email account. Note: Before
setting the email, please ensure that the network has been linked. Mailbox
setting guide 1. Click the E-mail icon, then the mailbox setup guide will
appear. 2. Click the next step button. 3. Sign in your email account and
password. 4. Click the next step button, and select your mailbox type: POP3 or
IMAP. 5. Click next step button to check whether email server is available. 6.
Input your account and click completion. 7. If the mail account is available,
it will automatically enter your inbox.
Delete email accounts You can delete the POP3 or IMAP email account having
been set in your mobile phone
1. Click E-mail
RFID at your service
26 | 36
2. Enter to your E-mail box 3. Press Menu key 4. Click accounts 5. Hold the mail account you want to delete. 6. Menu list popping up, then click “Remove account” 7. Click “OK” to remove it. Send E-mail messages 1. Click E-mail and get access to your inbox. 2. Click the inbox to enter in. With emails being refreshed automatically, emails can be read from time to time. 3. Press the Menu button, menu interface will pop up. 4. Click “compose” to write a new mail. 5. Input the recipient in the recipient column. 6. Input the theme of your e-mail and the content of your e-mail. 7. If you want to add attachments, press the menu button, then the menu options will pop up. 8. Click “add attachment” 9. Select attachments you want to send (e.g. video, images, etc.) 10. Click “Send” to send the e-mail. Note: If you have more than one account, click that account title before you click the main menu key to write an e-mail.
6 Multimedia
6.1 Support the file format Your 811 supports the following formats. Music
file format MP3 AAC(AAC, AAC+ and AAC-LC) OGG WMA WAV Video format AVI(H.264)
RMVB MKV WMV MEPG4 MOV
RFID at your service
27 | 36
VOB FLV 3GP
6.2 Music There are four default categories in music player: artist, album,
songs and playlist and now playing. Choose a category to check list contents.
If you enter a category, always choose until you have to play songs. For
example, if you choose the artist category, you will see a list of artist
names arranging in alphabetical order from A to Z. If you choose an artist,
the list will be presented with a list of the artist album songs.
Visit and broadcast music 1. Click music. 2. Click songs, also can click
artist, album or song list. 3. Choose one song to play. Add songs to the new
playlist 1. Click music. 2. Click songs. 3. Hold the song you want to add to
the playlist. 4. With music setting menu being pop up, click add to play
lists. 5. Click New. 6. Input a name for the playlist. 7. Click Save. Delete
songs in the playlist 1. Click music. 2. Click songs. 3. Hold the song which
you want to delete in the playlist. 4. With music setting menu being pop up,
click “delete “.
6.3 Camera Photo taking function 1. Click Camera. 2. The system enters the
Camera interface. 3. Click Shoot button to have photos taken easily. 4. Other
functions like sizes, storage locations, white balance and focusing adjustment
can be set as well. 5. After finishing taking a photo, flick left for photo
preview.
RFID at your service
28 | 36
Video recording functions 1. Drag up the switchover button to switch it into
the video recording mode. 2. Click the red Video Record button to perform
video recording. 3. Other functions like color effect, white balance and video
quality can also be
set. 4. Click Video Record button again to stop video recording, with the
previous
video being able to be seen.
6.4 Gallery Using the Gallery application program, you can automatically
search all photos and video files in 811 and in USB device (including TF
card). Moreover, the Gallery will classify such photos and video files by
these folders. You can use the Gallery program to view and edit photos, take
photos as wallpapers as well as viewing videos. Check pictures 1. Click the
intended folder to check pictures included. 2. Click the intended pictures
that will be played in full screen mode. 3. Flick right/left for browsing all
pictures 4. Pinch screen for zoom in/ out, when the pictures being able to be
zoomed. Skills: Gallery supports automatically rotating function. Rotating
your 811, the picture will automatically
follow the direction according to the way you rotate your 811.
Edit and set images Press the menu button to display images in full screen mode, you can select the intended image to edit and set the image according to your needs. Slide presentation
RFID at your service
29 | 36
Open the pictures and click slideshow. All the images can be shown in the slide folder for broadcasting. Sharing 1. Press the menu button and click “share”. 2. The picture will be shared with your friends via Twitter, Facebook, Messaging, Gmail or Email. Rotating 1. Press the menu button and click “More”. 2. Click Rotate Left or Rotate Right. Crop 1. Press the menu button, click “More” and select “Crop” 2. Click the image and drag a related region of the image you want, 3. Adjust the size you want, click “Save”. 4. If you want to quit cropping the image without saving it, click “Discard” and return to the Gallery. Edit images 1. Press the edit icon on the lower left.”.. 2. Choose effect 3. Press save icon on upper left corner
Video preview and play Operating the Gallery application, you can scan all video files in the 811 and in the USB device (including TF card), as well as previewing playable video files. Click one of them to play. In the video preview interface, press Menu button, with the function window appearing for editing video files as is shown below
6.5 HDMI HDMI high-definition video interface Use a standard HDMI cable to
connect 811 with high definition television. This interface supports GHEST
080P resolution. 1. 811 is in boot state. 2. Use a standard HDMI cable to
connect 811 with high definition television. 3. The system interface on the
811 can be synchronized with high resolution
TV pictures.
RFID at your service
30 | 36
7 Internet
7.1 Browser Enter into homepage The browser always habitually shows the last
homepage visited by user, the homepage will appear when it enters into the
browser on boot. Change your home page 1. Click browser. 2. Press the Menu
button, menu of browser settings pops up. 3. Click more. 4. Click Settings. 5.
Click settings home page. 6. Input website, and click “OK”. Browse website You
can slide the screen up and down to browse the webpage. Enlarge or shrink
pages Opening a webpage and dragging it, the webpage enlarging and zoom-out
button will appear at the bottom of the webpage. You can click “enlarge” or
“reduce” to browse webpage. Find the words in webpage 1. When browsing the
web, press menu button and menu options pop up. 2. Click more. 3. Click a
homepage you want to visit. 4. Enter your search projects. 5. When you input
characters, words will change from white to green. 6. Click the arrow on
search column to move on searching. Management bookmarks Settings webpage
bookmarks 1. Go to a webpage in the browsing interface. 2. Press the menu
button and click the bookmarks, then click add
bookmarks. 3. Edit bookmarks and click OK. Opening bookmarks 1. Press the menu
button and click the bookmarks in the browser interface. 2. Click the intended
bookmarks to open the webpage. Editing bookmarks
RFID at your service
31 | 36
1. Press the menu button and click the bookmarks in the browser interface. 2.
Click and hold the bookmarks to open the menu options. 3. Click the edit
bookmarks to edit it, and click Ok. Use the browser window Open a new browser
window 1. Open the browser window; click the menu button and click new window.
2. Input the website address in the new window. Switch browser window 1 In the
browser window, press the menu button and click windows. 2. Click the window
you want to open. Set browser In the browser interface, press the menu button
and click more, then click Settings to set the browser.
8 Other applications
8.1 Alarm clock 1. Click the Clock program. 2. Enter into programming
interface as the picture is shown below. 3. There were pictures, music, alarm
clock and page buttons. 4. Pressing the Menu button, alarm setting menu will
pop up.
8.2 Calculator 1. Click calculator. 2. Enter into the basic calculator panel.
3. Press the Menu button, and click the advanced panel. 4. Touch the digital
panel or operators on the counter to calculate. Skills: You can slide the
screen to change basic panel to advanced panel.
8.3 Explorer Browse the file Slide the screen to look for the File Manager You
can use the file browser to manage editing/deleting files and folders and
establish file sharing and FTP servers to achieve resource sharing.
RFID at your service
32 | 36
Cut and copy files 1. On the File Manager, press operation documents. 2.
Operation menu pops up, including Copy Open As, Cut, Copy, Rename,
Delete, Select All and Shortcut. Copy or Move the file 1. Use fingers to hold
the intended file in the file browser. 2. Click “copy” or “Move”. 3. Select
the file you want to copy or Move to and click Paste. Delete the file 1. Use
fingers to hold the intended file in the file browser. 2. Click “delete”. 3.
Click “delete” to delete files or click “cancel” to return. Quick search 1. On
the file browser, press the menu button to popup menu. 2. Click “new”. 3.
Click “search”. 4. When search panel pops up, input your keywords for
searching. 5. Click “sure”, then search progress bar will appear in notice
bar. 6. After the completion of the search, dialogue box will pop up to
confirm
whether it’s necessary to show results. 7. Click “sure” to display search
results.
9 Troubleshooting 1The first time you start 811, it takes rather a long time
After 811 system upgrades, it takes about 2-3 minutes to install preloaded
application software when starting it at first time. It will be faster and
faster later when you start it. 2Disability to connect with WIFI Check whether
the wireless router is at work. Check whether your 811 is near the wireless
router, whether there are walls or other obstacles preventing you from
wireless router. Check whether the user name and the password are correct.
3You feel a little bit hot of your 811 If you operate many programs at the
same time or the brightness of the screen is very high, it is normal to
33 | 36
RFID at your service
feel a little bit hot of your 811 because of costing more electricity. 4The system is abnormal. Installing the 3rd party program may result in failure operation, press RESET (near power connector) to reset the system. 5Disability of setting an Email and program login Check whether the network is normally connected with Internet Check whether Email setting is appropriate. Check whether the time of 811 system is the same as the local time
Appendix 1 Specifications Type
Content
Device model
CPU model
CPU frequency
RAM
ROM
Basic parameters Operation system
Network insertion
USB interface
Camera
Standard batteries
Power adaptor
811
Description
Cortex A7 Octa Core
2.0GHz
LPDDR3 2GB
eMMC 32GB
Google Android 6.1
Wi-Fi 802.11a/b/g/n/ac
Micro USB
8MP(rear)
5200mAh
Output: DC5.0V/2.0A
RFID at your service
34 | 36
SD card Visual pattern
Product visual appearance
Master screen
Video playing
Music playing
Application programs
Games Input method Picture browsing
OFFICE software
Supporting 32G maximum PDA 4.0-inch TFT liquid crystal touch (Capacitance 5touch) liquid crystal screen at the resolution of 480×800 Supporting AVI, RMVB, MKV, FLV and other formats, and supporting 1080P high resolution playing Built-in music player supporting playback in the MP3, WMA, WAV and other formats Supporting a third party program Android input method Supporting picture browsing in the formats of JPEG, BMP, PNG and GIF, etc Supporting office (word, excel, Power point reading and editing), and supporting PDF browsing
The revised User Manual does not contain the FCC required warning statements.
a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
b. Rule Part 15.21: The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
35 | 36
RFID at your service
interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help
RFID at your service
36 | 36