DESIDERIO PLUS Automatic Steam Suction Filling Instruction Manual

STEAM/SUCTION • AUTOMATIC FILLING • DETERGENT

INSTRUCTIONS MANUAL

TECHNICAL FEATURES

Automatic boiler filling
‘No water’ buzzer
Low voltage controls
Power supply
Max. power
Boiler element
Operative pressure
Vacuum power
Max. vacuum
Air-flow
Boiler rated capacity
Water tank capacity
Detergent tank capacity| 230V – 50 Hz
3000 W
2 x 1000 W
0,5 MPa (5 bar)
1000 W 2-stage tangential
21 kPa
45 litres/second
1,5 litres
1.5 litres + ‘no water’ buzzer
1.5 litres + ‘no detergent’ buzzer
---|---

IMPORTANT
Before attempting to operate the appliance, make sure you read and understand these instructions for use. Any use of the appliance deviating from that specified in this booklet is regarded as improper. The manufacturer disclaims all liability for damages resulting from improper use of the appliance; in this case, the only person responsible shall be the user. Instructions, drawings, tables and any other material contained in this booklet is confidential technical material. No information, either in whole or part, may be reproduced or handed over to third parties without the prior written permission of the manufacturer, who is and remains the exclusive owner of such materials.

Dear Customer,
The appreciation you have shown in purchasing this appliance deserves much more than a simple thank you note.
Your purchase is an important expression of confidence and we are very grateful about that. How can we best reward your choice? By assuring you that, you have purchased a machine combining attractive design and excellent performance.
We have put all our experience at your service to provide you with a piece of equipment that will help you solve all your cleaning problems, both domestic and heavy duty. Our appliances have been studied to the slightest detail to combine leading-edge design
with maximum functionality. To obtain long-lasting durability out of your appliance, you will only need to provide a minimum level of care and observe the maintenance instructions given in this manual.

The boiler construction is 18/10 stainless steel with thickness grade 12/10. Inner component parts are of professional standard because they are all exceptionally high quality.
– The appliance is equipped with the following safety devices: Cap with integrated safety valve Boiler operating thermostat
– The distinctive feature of our appliances is their ease of use combined with economical operation.
– With the help of our cleaning accessories, you can use the power of steam to thoroughly clean and sanitize your living environment. Once you have applied steam-cleaned a surface, you can vacuum off the dirt. This extraordinary feature will save you an enormous amount of work and provide you with a perfect result.
We reserve the right to make any changes to the design and manufacture of the appliance as may be necessary from time to time as a result of technological advances.

PRECAUTIONS TO BE TAKEN WHEN OPERATING THE MACHINE

Before attempting to operate the Steam generator – Vacuum cleaner – Iron, read these instructions for use. The Manufacturer disclaims all responsibility for any injury to people or damage to property arising from failure to adhere to the instructions in this manual or from improper use of the appliance. Keep these instructions for use in a safe place and attach them to the steam-vacuum cleaner should somebody new use it.

-This appliance may be used by persons with reduced physical, sensory or mental capacities, or who lack experience or knowledge, on condition that they are supervised or instructed in its safe use and aware of the dangers involved. Children must not play with the appliance.
– If the power cable is damaged it must be replaced only by the manufacturer, by their technical assistance service, or by a qualified person so as to prevent any risk.
– Make sure that the electrical installation {230V- 5OHz) is earthed and equipped with differential switch, as required by applicable safety regulations (Fig. 1)
– Do not tug at the lead or at the appliance to pull the plug out from the socket (Fig. 2)
– Disconnect the plug fro the socket before filling the tank with water.
– Do not use the appliance in gas-saturated environments.
– Do not vacuum flammable, explosive or corrosive substances.
– Do not use distilled water and do not introduce detergents or chemicals in the boiler.
– Let the water cool down before emptying the boiler
– Do not leave the appliance running unattended. ALWAYS switch it off before moving away from it.
– Before attempting to perform any maintenance or cleaning operation, ALWAYS unplug the appliance.
– Do not touch the appliance with damp or wet hands or feet when the appliance is plugged.
– Under no circumstances Should the appliance be immersed in water or other fluids.
-Use a damp cloth to clean the appliance. Avoid using solvents or detergents as these may damage the shell of the appliance.
– Under no circumstances should the steam jet be directed towards people, animals, or other electrical appliances (Fig. 3).
– Use only extension leads that are proportioned to the load to avoid safety hazards and any dangers for the operator.
– Always call a retailer or an authorised technician to have the temperature limiting device replaced and in case of failures or malfunctions. Do not attempt to disassemble the appliance.
– The appliance generates steam at temperatures up to 130°C.
-Avoid any direct contact between your skin and steam (Fig.4).
– Maximum power supplied at the socket 800 W {Fig.5).

NOTICE
Any repair or service to the supply lead should only be carried out by authorised service centre personnel.

THE INSIDE OF THE APPLIANCE SHOULD ONLY BE SERVICED BY AUTHORIZED SERVICE CENTRES

SAFETY PRECAUTIONS

IMPORTANT
The power of steam substitutes for all detergents. It cleans but also provides the added advantage of sanitizing your living environments.
The steam generated by the boiler can reach a temperature of 150°C; before cleaning any surface, we recommend you first check if the surface can withstand high temperatures.
You may want to do a preliminary test on small samples or concealed parts of the surface.

– Use the appliance in its horizontal position. Never keep the machine in an upright position while
the appliance is in operation.
– Additives may leave deposits in the boiler. You should never introduce soaps, perfumed essences or other chemicals in the boiler.
– Electrical appliances (TVs, radios, lamps), whether plugged or unplugged, should never be steam- cleaned.
– The appliance should not be used by children. Anyone using the appliance should be familiar with the instructions for use.
– Do not touch parts of the machine which may be very hot (e.g.: brushes and extensions)

NOTE
Our appliances are made in compliance with applicable regulations concerning electrical appliances.
Under unfavourable power supply conditions, the appliance can cause temporary voltage drops.

PAPAP CKAGING

Remove the appliance and the relative accessories from the packaging and put them in an appropriate place.
The original packaging has been designed to protect the appliance during shipment. We suggest you keep the packaging for future use.
Packing materials should be kept out of children’s reach as they may pose a hazard

OPERATIN THE STEAM/VACUUM APPLIANCE

Key to machine components

1. Body of the machine

2. Recovery tank

3. Transfer handle

4. Power cable

5. Boiler pressure gauge

6. Recovery tank latches

7. Red warning light – no water in boiler

8. Green warning light – temperature ready

9. Water fill cap

10. Main switch

11. Boiler switch super power

12. Boiler switch

13. Overfilling probes in recovery tank. When the recovery tank is overfilled, the probes (13) will automatically stop the motor. In this case, you need to restart the appliance.

14.  Steam control knob

15. Water/detergent tank (foam-free detergents only)

16. Accessories socket

17. Rear blow socket

18. Steam delivery/injection button (on handle)

19. Vacuum control button (you can increase suction power by keeping the button pressed)

20. Water/detergent delivery switch (on handle)
    Accessories

21. Three control handle, hose and multipurpose socket

22. Boiler fill bottle with safety cap

23. 2 Extension tubes

24. Textiles tool

25. Multipurpose Brush

26. Bristled frame for floors (multipurpose brush)

27. Bristled frame for fitted and non-fitted carpets (multipurpose brush)

28. Window-wiping brush

29. Sprinkler

30. Nozzle

31. Curved end for nozzle

32. 3 Half crevice for curved nozzle

33. 1 Crevice brush for curved nozzle

34. Brush with soft round, stiff round and stiff triangular inserts

35. Muffler

36. Spare O-ring kit

Filling the boiler
Fill the bottle (21) with tap water (Fig. 6).
Open the water fill cap (9) by hand; turn the bottle upside down with the top over the boiler hole and empty the contents of the bottle into the boiler. When the tank is full, close the cap (9) (Fig. 7)

NOTE
When the water tank is empty, an acoustic alarm will inform you that after 4 minutes steam will not be released any more.
You need to fill the tank with water

Do not fill the boiler with a detergent-based solution, as this may lead to permanent boiler damage.
Filling the detergent tank.
Pour tap water or foam-free detergents into the detergent tank after lifting the fill cap (15) (Fig. 8)

Filling the recovery tank
To provide more efficient suction, put 2.5 litres of water into the recovery tank (2). This will ensure that the air is filtered and any foreign material (dust, germs etc.) is trapped in the tank.
To ensure smooth functioning of the appliance, do not exceed the specified amount of water. (Fig. 9)

Connecting the Suction/Injection hose (21)
Pull the accessories socket door (16) wide open and plug the quick connection for the hose (21) into the socket on the front of the appliance; push the quick connection in as far as it will go.
Close the accessories socket door (16) against the body of the quick connection and ensure that the two parts latch onto each other. (Fig. 10)

Electrical connection.
The connection of the steam/vacuum appliance to the mains supply must be in accordance with current regulations (for Italy, refer to Law no. 46/90).
Check that the main voltage on the electric system matches the voltage the appliance has been engineered to run at. Electrical data can be found on the appliance identification plate (Fig. 11)

The lead (4) must be protected against inadvertent pinching.
Non-compliance with the instructions above relieves the manufacturer from any and all responsibilities and is classified as careless use of the appliance.

GENERAL OPERATING  INSTRUCTIONS

1. Using any electrical appliance requires the observance of a number of fundamental rules. Here is a list of these rules:
   • Do not touch the appliance with wet hands or feet
   • do not use the appliance when bare-footed or wearing inappropriate clothes
   • Do not tug at the lead or at the appliance to disconnect the plug from the socket

2. The appliance may not be used by children, teen-agers or individuals unfit for the purpose (e.g.: in a drunken state, etc)

3. Do not let people near the area of operation of the appliance

4. Keep the appliance dry; do not use in wet weather.

5. Do not obstruct the openings or slots provided for ventilation or heat discharge.

6. In case of failure and/or malfunction, switch off the appliance but do not tamper with it. Contact one of our service centres instead.

7. Do not use the appliance when the supply lead is damaged; to replace it, contact our service centres only.

8. Do not wash the appliance with water jets.

STARTART TING THE APPLIANCE STEAM/VACUUM FUNCTION

Make sure the button (18) and switches (19, 20) on the handle (21) are OFF.
– Press the main switch (10) und the boiler switch (12) to turn the appliance and the boiler on.
If more power is needed and in order to accelerate the heating process, press the boiler switch super power (11).
– Wait for the boiler to reach the appropriate operating pressure. When the green light (8) illuminates, the appliance is ready for use.
– Select the desired steam level with the appropriate control hand wheel (14).

NOTE
Vacuum and steam power can be changed during machine operation.
Under normal operating conditions, an illuminated green warning light will indicate that pressure in the boiler is within normal values; however, continual steam delivery causes pressure to decrease slightly; in this case, the warning light will switch off  automatically until the operating pressure value is reached again. Even in this condition, you may safely continue with your cleaning job, since resistances in the appliance have been proportioned to provide immediate reinstatement of the operating pressure.

Turning on the appliance in the vacuum function:
Ensure that the switch (19) on the handle (21) is OFF.
Press the main switch (10) to switch ON the appliance in vacuum-cleaning mode. Now the appliance is ready for use.

How to operate the appliance:
Before using the appliance, fit the desired tool to the hose handle (21). Once the tool is installed, use the controls on the handle to operate the appliance as fit.
Using the controls on the handle, you can:
– deliver steam, by pressing the red button (18);
– vacuum, by pressing the white button (19);
– deliver detergent or water, by pressing the water/detergent delivery switch (20);
– deliver steam and vacuum at the same time, by pressing red button (18) and white switch (19).
– deliver steam and detergent at the same time, by pressing red button (18) and switch (20);
– deliver water/detergent and vacuum at the same time, by pressing switch (20) and white switch (19).
To stop the function in use, simply turn off the relevant switch.

NOTE
If water or detergent in the tanks (9) and (15) run out, you will be alerted by a buzzer.
NOTE
When the cleaning job is completed, it is advised to leave the vacuum function enabled for a few seconds. This will allow the recovery of any residual water and steam that are left in the ducts.

Using the accessories.
The appliance is provided with a number of accessories to fulfil different needs. To connect or disconnect the different components, simply install or remove the male end to or from the female part. (fig.12). Choose among the set of standard accessories the ones that are most fit for the job.

All switches on the handle should be off when replacing the accessories.
Never replace the accessories while the appliance is delivering steam; danger of burns.

SPRINKLER (Figures 22-23)
The sprinkler (22) is particularly suitable for cleaning loose carpets, fitted carpets and floors.
Water/detergent is reduced into micro-particles and sprinkled over the cleaning surface without soaking it.
Fit the sprinkler between the extension hose and the brush:
– Install the female end of the extension hose onto the male end of the sprinkler and rotate the locking ring on the extension hose. (Fig. 13)
– install the female end of the sprinkler to the end of the brush and rotate the ring to lock the two parts together ( (Fig. 14)
– install the female end of the sprinkler to the end of the brush and rotate the ring to lock the two (Fig. 14)
– install the female end of the sprinkler to the end of the brush and rotate the ring to lock the two

MULTIPURPOSE BRUSH (23)
This tool is fitted with a joint that allows the brush to rotate by 360°. Because of this particular feature, the multipurpose brush can effectively clean areas that are particularly hard to reach.
– The multipurpose brush consists of a universal element to which the following parts can be fitted as needed: bristled frame for hard floors and surfaces (27)

FITTING THE MULTIPURPOSE BRUSH (23)
To install the bristled frame for fitted and non-fitted carpets (26), introduce the stiff brushes into the appropriate guides with the tabs facing inwards (Fig. 15).
To fit the desired insert to the brush body simply place the insert against the brush body and press one against the other until the little lever on the outside of the brush body is fully engaged in the slot provided (Fig. 16).
To remove the bristled frame, disengage the lever from the brush body.
NOZZLE (30)
Suitable for specific jobs. Use the nozzle to clean tile joints or seams in seats or sofas, where dirt is particularly stubborn.
TEXTILES TOOL (24)
A useful tool for cleaning sofas, armchairs, mattresses, car seats and particularly narrow areas where the multipurpose brush cannot reach.
WINDOW-WIPING BRUSH (28)
Particularly suitable for cleaning windows and mirrors.
For correct use, follow the instructions below:
– Steam the surface you want to clean while keeping the bristles against the surface.
– Press the rubber blade onto the surface and vacuum any water on the surface by moving the tool vertically from top to bottom (Fig. 17).
EXTENSION TUBES (23)
Fit the extension tubes as needed and lock them into position.
You may also use one single extension tube (Fig.18).

Only use original accessories, as these provide better quality and safety characteristics. Non-use of original accessories shall relieve the manufacturer from any responsibility.

Stopping the steam/vacuum appliance.
To stop the appliance, turn the steam and suction control switches on the handle (21) to the off position (Fig. 19); move the switches on the appliance to the off position and disconnect the plug from the socket.

Switch on and off the appliance only by using the switches, never by plugging and unplugging.
Never tug at the lead (4) to disconnect the plug from the socket..
Once the cleaning cycle is complete, drain the recovery tank (2) and clean the accessories you have used.

OPTIONAL ACCESSORIES FOR THE STEAM-VACUUM FEATURES

ROTATING VACUUM BRUSH
This brush combines the cleaning action of steam with the powerful effect of vacuum generated by the motor and enables the operator to remove hairs, dust, and debris from all textile surfaces (loose and fitted carpets, sofas, car seats, etc.).

HOW TO FIT THE BRUSH: Introduce the brush into the female end of the extension tube or of the handle of the hose.

ROUND BRUSH ASSEMBLY WITH SOFT STIFF OR STIFF TRIANGULAR INSERTS
This brush can be attached to the handle or to the extension hoses and is ideal for vacuuming gaps. Three different inserts are available with soft or stiff bristles o triangular stiff bristles, which can be installed to the round brush assembly.

HOW TO FIT THE TOOL: : Introduce the brush into the female end of the extension tube. Fit the stiff or soft round brush to the brush body and engage it.

IMPORTANT NOTES
Your steam/vacuum appliance, like any technical appliance, must be used only in accordance with the instructions.

Materials such as concrete and masonry debris should not be vacuumed in the presence of moisture, as these materials may harden inside the recovery tank and cause incrustations that lead to filter damage and, eventually, to permanent motor damage.
The recovery tank must be cleaned regularly to ensure smooth running of the appliance and for hygienic reasons (bad odours, etc.),.
Wear suitable protective gear (gloves, masks, etc.) before working on the recovery tank.

Vacuuming will stop automatically when the recovery tank (2) is full-up with dirt and liquids, and will not be resumed until the recovery tank (2) is emptied and the accessory switch (12) has been switched off and then on again.

X. Overfilling probes in recovery tank. When the recovery tank is overfilled, the probes (13) will automatically stop the motor. In this case, you need to restart the appliance.

MAINTENANCE

Boiler maintenance.
The boiler should be serviced on average every 300 hours of operation. If the appliance is used with particularly hard water (> 30∞Fr), service the boiler at shorter intervals.
Wash the boiler using a boiler de-scaling product (available from the manufacturer), carrying out the steps set out below. Do not use products other than those recommended for cleaning the boiler.

CAUTION
Maintenance should be performed with the appliance OFF and the power plug disconnected from the socket.
The boiler should be cleaned out on a regular basis (approximately every 100 hours of operation, or every 6 months). Wash the boiler with the de-scaling product (follow the instructions for use on the product package) as follows:

DE-SCALING PRODUCT CODE 40179

• Remove the fill cap (9) (Fig. 20). Fill boiler with the contents of a 10 ml bottle, mix in 0.5 litres of water and operate as per normal.
• De-scale the boiler regularly according to use (every 100 hours of operation approximately).

Before attempting to carry out any maintenance, disconnect the steam/vacuum cleaner from the mains by unplugging the appliance. The appliance will only be disconnected from the mains once it is disconnected from the power outlet. When maintenance is complete and before reconnecting the steam/vacuum cleaner to the mains, make sure that all parts have been reassembled properly.

Cleaning the recovery tank and accessories.
Check the state of picked up matter on a regular basis. Empty and clean the recovery tank and the accessories after each use.
For better accessory efficiency, clean the O-rings on a regular basis.

Before attempting to clean the tank, you must deactivate the main switch, unplug the appliance, and wait for the machine to cool down.
Do not immerse the appliance in water! It is absolutely forbidden to service the inside parts of the machine.
The recovery tank (2) should be cleaned on a regular basis to remove any fluid or contamination. Release the latches (6) and lift the top part of the appliance (1).

The recovery tank (2) should be cleaned on a regular basis to remove any fluid or contamination. Release the latches (6) and lift the top part of the appliance (1).

For cleaning, follow the instructions below:
– Empty the recovery tank (2]. : Fill container with up to 3 litres of clean water.
Disinfectants may be added as long as they are foam-ree.
– Activate the vacuum function using the vacuum button (19} and draw water through the accessories previously used for cleaning.
– Empty the recovery tank (2) and repeat the operation as necessary.
Every time the bottom part of the appliance is cleaned, clean any solid residues off the outside of filter (A) (Fig. 21).

CLEANING THE ACCESSORIES
Clean the accessories (extension hoses, multi-purpose brush, nozzle, textiles tool) with running water. It is advisable to use steam when cleaning the frames.

STOWAWAW GE
When stowing the appliance away for long periods of time, you should first disconnect the steam/vacuum appliance from the mains supply by removing the plug from the socket. Then, empty and wash the waste recovery tank and clean the boiler. Also, take adequate precautions to protect any parts that may be damaged because of dust build-ups. When setting the appliance at work again, inspect the steam delivery / suction hoses and the accessories for cracks or slits.
SCRAPPING
Should you decide not to use the steam/vacuum appliance any longer, we recommend making the appliance inoperative by removing the power supply lead. We also recommend neutralizing all parts that may pose hazards, especially to children who may use the discarded appliance as a toy.
The steam/vacuum appliance is special waste; as such, it should be disassembled and divided into groups of parts of the same kind that should be disposed of in accordance to current regulations. Do not use scrapped parts as spare parts.

Legal notice

• These instructions for use contain essential information for proper use and accurate maintenance
• These instructions for use contain essential information for proper use and accurate maintenance of the appliance as well as information on machine functions.
• Understanding such information and adhering to the instructions given in this booklet is critical for hazardless, safe operation and maintenance of the appliance.
• Please contact your local retailer or the manufacturer if you require further information or if you notice problems that you feel have not been adequately covered by these instructions for use.
• Please note that the contents of this instruction manual are not part of any earlier or existing settlement, legal agreement or contract and that no future settlement, agreement or contract will alter the substance of the contents in this manual.
• All of the manufacturer’s obligations are contained in the appliance sale agreement, which also contains full and exclusive terms and conditions of guarantee.
• All the terms of guarantee contained in the agreement are neither restricted nor extended based on these explanations.
• These instructions for use contain information protected by copyright.
• These instructions for use may not be photocopied or translated into another language without the prior written permission of the Manufacturer.

DISPOSAL OF THE APPLIANCE

• Appliances no longer in use should be made inoperative.
• Disconnect the plug from the socket and cut the electrical cable.
• Send any appliances no longer in use to an appropriate waste collection centre.

WMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As o reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

TROUBLES AND REMEDIES

needed.
Suction power has reduced noticeably| Clogged or broken hoses, tubes or accessories.
Recovery tank is too full.
Insufficient adherence to machine body.| Clean hoses, tubes or accessories or replace them. Empty the recovery tank. Check if machine body is secured to the recovery tank and check that the clips are fastened.
The motor is running fast (high pitched noise).| Clogged hoses, tubes or accessories.
Recovery tank is too full.| Clean hoses, tubes or accessories.
Empty the recovery tank.
Water leaking from accessories joints.| Joint seals worn or leaking.| Inspect, clean and lubricate seals; replace seals if necessary.
Accessories not fully engaging.| Dirt has deposited in the joints and quick connections.| Clean and lubricate the joints and quick connections.
No steam is coming out and suction is not working.| Boiler not yet under pressure (green light off).
Power failure.
Appliance plug is not in the socket.| Wait a couple of minutes for the green light to illuminate. If the problem is still there, contact one of our Service Centres. Check that power is available; check that the plug is properly connected to the socket.
Check that the appliance plug is properly connected to the socket in the electric panel.
Little drops of water dripping from the accessories.| This condition is normal during the first minutes of operation;
condensate will form because of a difference in temperature
between the accessories and steam.| The inconvenience is normally eliminated after a few minutes
of operation; If the trouble is still there, clean the boiler.
No water/detergent is delivered when the pump switches both on the
appliance and on the handle are pressed..| No water or detergent is in the tank (15)| Add more water or detergent.

X. Overfilling probes in recovery tank. When the recovery tank is overfilled, the probes (13) will automatically stop the motor. In this case, you need to restart the appliance.

the appliance switches. Empty the tank, clean the probes (X), and allow them to dry.
If the problem persists, contact your Service Centre.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>