NEMTEK Electric Fencing Tonger Instruction Manual

June 13, 2024
NEMTEK

NEMTEK logo

Free Standing Fencing
Instruction Manual

NEMTEK Electric Fencing Tonger

End Strainer posts – Setup

NEMTEK Electric Fencing Tonger - Fig 1

Hot dip galvanised corner and end posts

Round tube end and corner straining post sizes| Number of wires| Number of holes| Fence height| Associated stays
---|---|---|---|---
76 x 2mm/1.5m (EY-CPR7620HD15)| 12| 2 x 12| 1.2m| 38 x 2mm/1.5m (EY-CSR3815HD)
76 x 2mm/2.4m (EY-CPR7620HD24)| 20| 2 x 20| 2.Om| 38 x 2mm/2.4m (EY-CSR3824HD)
76 x 2mm/3.Om (EY-CPR762OHD3O)| 24| 2 x 24| 2.4m| 50 x 2mm/3.Om (EY-CSR5030HD)
95 x 2mm/2.4m (EY-CPR9520HD24)| 20| 2 x 20| 2.Om| 50 x 2mm/2.4m (EY-CSR5024HD)
95 x 2mm/3.0m (EY-CPR9520HD30)| 24| 2 x 24| 2.4m| 50 x 2mm/3.0m (EY-CSR5030HD)

Corner Strainer Posts – Setup

NEMTEK Electric Fencing Tonger - Fig 2

Intermediate Strainer posts – Setup

NEMTEK Electric Fencing Tonger - Fig 3

Tensioning System Option A

There are two systems that Nemtek offers for tensioning the free standing fences.
Option A uses a compression spring on the opposite side of the tensioner.

NEMTEK Electric Fencing Tonger - Fig 4

Tensioning System Option B

Option B combines the tensioner and the spring tensioner into one hybrid compression spring.
NOTE: If tension sensor DATS3 is used, replace the ultra strain insulator with the DATS3 and use in conjunction with option B.

NEMTEK Electric Fencing Tonger - Fig 5

Intermediate Posts – Y – Pickets

NEMTEK Electric Fencing Tonger - Fig 6

Bitumen (NB) or Hot Dip Galvanised (NHD) Intermediate Posts or Y-Pickets

Nemtek Y-picket intermediate post sizes| Number of wires| Number of holes| Fence height| Associated insulators
---|---|---|---|---
15m (EY-Y15NB) or (EY-Y15NHD)| up to 12| 12| 1.2m| Picket insulator (El-PI) or Pop through hole insulator (EI-POPEM/B/ULT)
2.4m (EY-Y24NB) or (EY-Y24NHD)| up to 20| 20| 2.0m| Picket insulator (EI-PI) or Pop through hole insulator (EI-POPEM/B/ULT)
3.0m (EY-Y3ONB) or (EY-Y3ONHD)| up to 24| 21| 2.1m| Picket insulator (EI-PI) or Pop through hole insulator (EI-POPEM/B/ULT)

Free Standing 20 Line System – Schematic Example

NEMTEK Electric Fencing Tonger - Fig 7

Fence Points
A: 20 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES- CNT3)
B: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES- CNT3); 20 x Combo Tensioners (ES-CTNTBB)
C: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES- CNT3); 20 x Combo Tensioners (ES-CTNTBB)
D: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES- CNT3); 20 x Combo Tensioners (ES-CTNTBB)
E: 20 x Picket Insulators (EI-PI)
F: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES- CNT3); 20 x Combo Tensioners (ES-CTNTBB)
G: 20 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Combo Tensioners (ES- CTNTBB) Gate Detail
Gate 1: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES-CNT3); 20 x Combo Tensioners (ES-CTNTBB)
Gate 2: 40 x Through Hole S-Hooks (ES-HK/THR/HDG); 20 x Compression Springs 3 (ES-CNT3); 20 x Combo Tensioners (ES-CTNTBB) ‘

NEMTEK Electric Fencing Tonger - Fig 8

WARRANTY

Unless otherwise specified all Nemtek energizers have a 2 year warranty and all other fencing components have a 1 year warranty from date of sale against defects due to faulty workmanship or materials. Nemtek (Pty) Ltd will, at its discretion, either repair or replace a product that proves to be defective. Nemtek (Pty) Ltd does not guarantee that the operation of the product will be uninterrupted and totally error free. Faulty products must be returned to one of the Nemtek Group outlets. The buyer shall pay all shipping and other charges for the return of the product to Nemtek (Pty) Ltd.
LIMITATION OF WARRANTY
The warranty does not apply to defects resulting from acts of God, modifications made by the buyer or any third party, misuse, neglect, abuse, accident or mishandling.

EXCLUSIVE REMEDIES

The remedies provided herein are Nemtek (Pty) Ltd’s sole liability and the buyers sole and exclusive remedies for breach of warranty. Nemtek (Pty) Ltd shall not be liable for any special, incidental, consequential, direct or indirect damages, whether based
on contract, tort, or any other legal theory. The foregoing warranty is in lieu of any and all other warranties, whether expressed, implied, or statutory, including but not limited to warranties of merchantability and suitability for a particular purpose.

NEMTEK logo

ww.nemtek.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals