Contour C3 RollerMouse Pro Wireless Regular Wrist Installation Guide
- June 13, 2024
- contour
Table of Contents
Product Manual
What’s in the Box?
- Roller Mouse Pro
- Wrist rest
- Keyboard Risers
- Dongle
- USB extender
- USB charging cable
User guide
Functions
A. Cursor speed
B. Power switch
C. Roller bar
D. Copy
E. Paste
F. Left-click
G. Right-click
H. Scroll wheel
I. Double-click
Quick Start
- Connect via Bluetooth Power on Roller Mouse Pro (button B). On your computer, navigate to the area of settings regarding Bluetooth connections. Select the option to add or discover a Bluetooth device. Your Roller Mouse Pro will automatically be recognized, select it for the computer to start Bluetooth connection.
- Connect via USB dongle Insert USB dongle into available USB port and power on your Roller Mouse Pro. Your computer will recognize your new device and connect automatically.
- Connect via a wired USB connection Connect the USB cable to your Roller Mouse and into an available USB port on your computer. Your computer will recognize your new device and connect automatically.
Cursor Speed (DPI)
Press the Cursor speed (button A) to cycle through cursor speeds. There are
speed selections which range from slow (600 DPI) to fast (2800 DPI). Speed can
be identified by the LED lights as shown. Hold Cursor speed (button A) for 8
seconds to default settings.
Battery level
Battery level is shown when the Roller Mouse Pro is powered on or plugged in.
If battery level is below 20%, a single light will flash to indicate the need
to charge the device.
Roller bar click force adjustment
Click force refers to the level of resistance when clicking the Roller bar. To
adjust click force, press and hold button A (Cursor speed) then press and
release button C (Roller bar). Move button H (Scroll wheel) up and down to
adjust the click force settings.
To disable the Roller bar click function, adjust the click tension until all
LEDs are illuminated.
Roller bar click volume adjustment
The Roller bar has 6 different click volume settings. To change the click
volume, press and hold button A (Cursor speed), while continuing to hold A
(Cursor speed), press and release button H (Scroll wheel), the LED light will
show current click volume setting. Move button H (Scroll wheel) up/down to
adjust volume setting. Release button A to confirm adjusted click volume. To
disable the Roller bar click volume, adjust the click volume until alle LEDs
are illuminated.
Charging
To charge your Roller Mouse remove the USB extender and dongle from the
charging cable. Plug the USB-C end into the Roller Mouse and connect to a
USB-A at your computer.
Your Roller Mouse will be fully charged in approx. 5 hours.
You may continue to use the Roller Mouse as it charges.
Wiresless connection
Once powered on, the device is in automatic mode which will pair to the first
available connection. The device will attempt to connect to the dongle first.
If no connection is made, the device will attempt to connect via Bluetooth
using the pairing information that is already in the unit. If no pairing
information is available, it will start Bluetooth pairing mode and remain in
that pairing mode for about two minutes.
If the device is left in automatic pairing mode, the Roller Mouse will cycle
through the above steps each time it’s powered off and then powered back on
again.
Pairing and secondary options
-
Restart Bluetooth pairing:
Press button A. While continuing to hold A, press and release button F two times, then release button A. -
Select Bluetooth-only connectivity:
Press button A. While continuing to hold A, press and release button F three times, then release button A. -
Select dongle-only connectivity:
Press button A, while continuing to hold A, press and release button G three times, then release button A. -
Restore pairing with dongle:
Unplug then re-plug the dongle to the unit to enable pairing.
Hold the device close to dongle and press button A. While continuing to hold A, press and release button G two times, then release button A. -
Reset wireless function to automatic pairing mode:
Press button A. While continuing to hold A, press and release button F, then release button A.
When the device is plugged with the USB cable, this connection overrides
wireless connectivity.
Please visit contourdesign.com/BT for further information about Bluetooth.
Keyboard risers
Before using your Roller Mouse Pro, please take a moment to adjust your
keyboard.
If you are using other keyboards than Contour’s Balance Keyboard, you can use
the Keyboard risers to achieve the desired keyboard height and angle. Simply
place the Keyboard risers under your keyboards feet – as the keyboard was
lying on the table.
For a proper ergonomic position the front edge of the the keyboard should be
as close to the Roller bar as possible. We recommend to use negative tilt
helping you to hold a neutral wrist position and decreasing the extension of
your fingers.
Software driver
All Contour’s ergonomic products are plug-and-play. If you want to customize
your Roller Mouse Pro, we recommend to download the free driver available at:
contourdesign.com/drivers
Battery disposal
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada’s licenceexempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC:“ before the certification/registration number only signifies
that the Industry Canada technical specifications were met. This product meets
the applicable Industry Canada technical specifications.
Warranty
If there is a functional defect due to faulty manufacturing, we will replace
the product. This warranty does not cover damage that results from misuse of
the product.
Attention!
If you attempt to dismantle your “Roller Mouse Pro” you will invalidate your
warranty.
Contour Design Nordic A/S
Nyropsgade 41-43, 1. floor
DK-1602 Copenhagen V, Denmark
Phone: +45 70 27 02 27
Email: info@contourdesign.com
Contour Design, Inc.
10 Industrial Drive
Windham, New Hampshire 03087, USA
Phone: 603-893-4556
Email: ergoinfo@contourdesign.com
For more information please visit:
www.contourdesign.com
Tested to comply with FCC and
IC standards.
References
- Bluetooth Quick Start And Support
- Drivers – Download Software for Contour Design Products
- Contour Design – Ergonomic mice, Superior design
- Contour Design – Ergonomic mice, Superior design
- Bluetooth Quick Start And Support