IRay Technology Co Ltd AT31UZ Thermal Camera for Ultra High Temperature Measurement User Manual
- June 13, 2024
- IRay Technology Co Ltd
Table of Contents
- IRay Technology Co Ltd AT31UZ Thermal Camera for Ultra High Temperature
- Product Information
- Product Usage Instructions
- Safety Information
- Legal Disclaimer
- Safety Information
- Notice to user
- Camera Introduction
- Camera Models
- Lens Parameters
- Quick Start Guide
- Product and Accessories List
- Technical Data
- Mechanical Drawings (AT31U)
- Common Troubleshooting
- Cleaning Thermal Camera
- Terms and Definitions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IRay Technology Co Ltd AT31UZ Thermal Camera for Ultra High Temperature
Measurement
Product Information
Product Name: AT Fixed Focus Series AT31U Online Thermal Camera For
Ultra-high Temperature Measurement
Manufacturer : IRay Technology Co., Ltd.
Website : www.infiray.com
Introduction to IRay Technology
IRay Technology Co., Ltd. is a company focused on developing infrared
thermal imaging technologies and manufacturing related products. They have
independent intellectual property rights and aim to provide professional and
competitive infrared thermal imaging products and solutions to customers
worldwide. Their product range includes IRFPA detectors, thermal imaging
modules, and terminal thermal imaging products. IRay products are used in
various fields such as epidemic prevention and control, industrial
thermography, security and fire control, night vision observation, automatic
driving, Internet of Things (IoT), AI, and machine vision.
Product Usage Instructions
Legal Disclaimer
-
Legal Disclaimer
-
Copyright
-
Quality Assurance
The products developed and manufactured by IRay Technology adhere to the ISO 9001 standard for quality management. IRay reserves the right to make changes and improvements to their products without prior notice.
Safety Information
WARNING
- Before using the cleanser, make sure you read all applicable material safety data sheets (MSDS) and warning labels on cleanser containers.
- It is forbidden to disassemble or refit the thermal camera at will.
CAUTION
- Do not use the product under conditions that don’t match the environmental requirements. Refer to the product parameter table for specific use environment requirements.
- Never apply cleaning solutions or similar liquids directly to the thermal camera, cables, or other components.
Notice to User
Calibration
Annual calibration of the thermal camera is recommended to ensure
temperature measurement accuracy. This can be done through IRay Technology or
third-party organizations.
Accuracy
For accurate measurement, follow these recommendations
- Use the thermal camera after it has stabilized for 30 minutes.
- Keep the operation distance within 13m for better accuracy.
- This thermal camera is designed for ultra-temperature measurement, so it’s not recommended to monitor targets at normal temperatures.
Usage
To avoid prolonged stress on the connecting parts and improve product
stability, it’s recommended to provide proper support for the lens during
integration use.
Camera Introduction
No information provided in the user manual text-extract regarding the
camera introduction.
Legal Disclaimer
Legal Disclaimer
The thermal cameras manufactured by IRAY TECHNOLOGY are warranted for a period
of two-year and the accessories are warranted for a period of three-month from
the delivery date of the original purchase, provided such products have been
under normal storage, use and maintenance.
This warranty extends only to the original purchaser and is not transferable.
It is not applicable to any product that has be subjected to misuse, neglect,
accident or abnormal conditions of operation.
In the case of a defect in a product covered by this warranty, the product
must not be further used or maintained in order to prevent additional damage.
The purchaser shall promptly report any defect to IRAY TECHNOLOGY or this
warranty will not apply.
IRAY TECHNOLOGY will, at its option, repair or replace any such defective
product free of charge if, upon inspection, the product or accessories prove
to be defective, the user can contact with after-sales service department of
IRAY TECHNOLOGY within the said warranty period.
Copyright
©IRay Technology Co., Ltd. 2021. All right reserved worldwide. All contents in
this manual, including words, pictures, images, etc., belong to IRAY
TECHNOLOGY CO., LTD. (Hereinafter referred to as “THE COMPANY” or “IRAY
TECHNOLOGY”). No part of the manual, in whole or in parts, may be copied,
photocopied, translated, or transmitted without the prior written permission
of IRAY TECHNOLOGY. This manual is used as a guide. The photos, graphics,
diagrams and illustrations provided in the manual are only used to explain,
which may be different from the specific product. Please refer to the real
object. We try our best to make sure the contents in this manual are accurate.
We do not provide any representations or warranties in this manual.
IRAY TECHNOLOGY reserve the right to update the manual. If you need the latest
version of this manual, please contact us. It is recommended that you use this
manual with the guidance of professionals.
Quality Assurance
The Quality Management System under which these products are developed and
manufactured has been certified in accordance with the ISO 9001 standard.
We reserve the right to make changes and improvements on any of the products
without prior notice.
Safety Information
WARNING
Before using the cleanser, make sure you read all applicable material safety
data sheets (MSDS) and warning labels on cleanser containers.
It is forbidden to disassemble or refit the thermal camera at will.
CAUTION
Do not use the product under conditions that doesn’t match the environmental
requirements. For specific use environment requirements, see the product
parameter table.
Never apply cleaning solutions or similar liquids directly to the thermal
camera, cables, or other components.
Notice to user
Calibration
Annual calibration to the thermal camera is recommended to ensure the accuracy
of temperature measurement, either through IRAY TECHNOLOGY or third-party
organizations.
Accuracy
For accurate measurement, the below operations are recommended.
- Use the thermal camera after it is stable for 30 minutes.
- Operation distance should not be farther than 13m for better accuracy.
- This thermal camera is designed for ultra-temperature measurement, so it’s not recommended to monitor the targets at the normal temperature.
Usage
In order to avoid the prolonged stress on the connecting parts and improve the
product stability, it’s recommended to make proper support for the lens during
integration use.
Camera Introduction
Main Features|
- Compact size
---|---
-
Easy installation
-
Wide application for temperature measurement
Typical Applications|
- Blast furnace monitoring
---|---
-
Molten iron tank monitoring
-
Sintering monitoring
-
Material level monitoring
-
Kiln Monitoring
Camera Models
AT31U | 1 | Z |
---|---|---|
Model | Lens | Z |
AT31U | 1 :9.7mm | camera shape |
AT31U | 2: 25mm | camera shape |
Table 5.1 Camera Models
- E.G. :AT31U1Z stands for AT31U with 9.7 mm lens.
Lens Parameters
Resolution | Lens focus | FOV ( H×V ) | IFOV |
---|---|---|---|
384×288 | 9.7mm | 37.9°×28.7° | 1.753mrad |
384×288 | 25mm | 14.9°×11.2° | 0.680mrad |
Quick Start Guide
Please follow the steps below
Install IRT_TAS (one set of thermal camera) or IRT_VMS (multiple sets of thermal cameras). Please refer to the actual version since the software may have version updates. The computer configuration for installing the software is recommended to meet the following conditions
- i5-9500T and above CPU
- 8G and above memory
- 64-bit Win10 system
- Main board H370 chip set
- Support Gigabit network.
- The screen resolution is recommended to be 1920×1080
- Video Memory 128MB
- Network card RTL8168/8111/8112 Gigabit Ethernet Controller
Connect the thermal camera, power supply and computer.
Set the computer configuration according to the manual of the software, change
the IP to 192.168.1.×××.(Do not choose 123 or 29 to avoid connection failure
for the
same IP with the camera.
Double-click to run the software, type in the correct user name and password,
and click Login.
Continue to operate according to the steps of the software manual. If the
product is successfully connected and the image is normal, you can use the
software for thermal camera control, temperature analysis or monitoring at
this time.
The client software TAS and VMS are applicable for the thermal camera, which
can realize other functions needed.
The client software TAS can realize the below functions
Image capture and video recording
Thermographic analysis/secondary analysis
Export recorded infrared data
Set the parameters and alarm information
Update firmware to acquire the new functions
The client software VMS can realize the below functions
Multiple thermal camera monitoring
Set parameters and alarm information of a certain thermal camera
Get the information in the alarm region
Product and Accessories List
Product and Accessories
ATU online ultra-high temperature measurement thermal camera
ATU special cable
ATU special connector
Table 8.1 Product and Accessories List
Technical Data
AT31U
Imaging and Optical Data
Resolution| 384×288
NETD| <50mk (optional 40mk)
Image Frequency| 50Hz
Detector Data
Detector Type| VOx, Uncooled FPA detector
Spectral Range| 8~14μm
Pixel| 17μm
Temperature Measurement
Object Temperature Range|
- 0℃~400℃
- 400℃~1500℃
Accuracy|
- ±2℃ or ±2%,the larger value shall prevail@(100℃~1500℃)
Measurement Tools|
- Any fixed point
- Full screen max./min. temperature
- capture
- Center point
- Line/Area analysis tool
- Manually choose temperature width
- Radar temperature measurement tool
Interface
Analog Video Output| 1 channel video
Network Output| RJ45 10M/100M/1000M adaptive
Alarm Interface| 1 input, 1 output
Network Protocol| Ethernet/IP, TCP, UDP, SNTP, RTSP, HTTP, ICMP, SMTP, DHCP,
UPnP, PPPOE
Ethernet| Control and transmit images
Interface Protocol| ONVIF,GB28181,Modbus TCP(support the transmission of
regional temperature information)
Image Adjustment
Brightness and Contrast Adjustment| Manual/Auto 0(defaulted)/Auto 1
Polarity| Black hot/white hot
Palette| 18 palettes are available
Image Flip| Left and right/up and down/diagonal
Power System
Typical power consumption@25℃| ≤3.3W
Connector type for external power supply| DC
Voltage| 9~26VDC
Environmental Data
Operating Temperature Range| -20℃~60℃
Storage Temperature Range| -40℃~70℃
Humidity (operating & storage)| 5%~95%RH(no condensation)
Shock| 30g,11ms, all axial
Vibration| 4.3g, random vibration, all axial
Physical Data
Weight| 543g±5g(25mm lens)
Dimension(L×W×H)| 62mm×62mm×144mm
Housing Material| Aluminum
Table 9.1 AT31U Performance Parameters
Mechanical Drawings (AT31U)
Common Troubleshooting
Troubles | Possible Cause | Solutions |
---|
Images are
blurred| No image calibration for a
long time| Click the shutter correction icon in
the software
Camera can’t be started| The supply voltage exceeds the normal working supply
voltage range| Check whether the power supply voltage is between 9~26V.
The power connector is loose| Check whether the power cable is connected
Inaccurate temperature measurement| The stabilization time for thermal camera
is too short.| Keep the thermal camera stable for more than 10 minutes.
Image is stuck.| Power cable or network cable connection is loose.| After
checking the power supply
and network cable connection, preview the images again.
Images cannot be previewed.| The camera is not connected to Internet or the connection between the camera and the
Internet is not good.
| Connect the camera to Internet and make sure that they are connected well.
Table11.1 Common Troubleshooting
Cleaning Thermal Camera
Cleaning Camera Housing, Cables and Other Items
Camera Housing, Cables and Other Items
Cleaning Liquids| One of the following liquids can be used.
- warm water
- mild detergent solution
Cleaning Tools| soft cloth
Cleaning Procedure| Please follow this procedure
- Soak a soft cloth in the liquid.
- Twist the cloth to remove excess liquid. 3.Clean the camera parts with the cloth.
Cleaning Infrared Lens
Cleaning Infrared Lens
Cleaning Liquids| One of the following liquids can be used.
- Commercial lens cleaning liquid with more than 30% isopropyl alcohol.
- 96% ethyl alcohol (C2H5OH).
Cleaning Tools| Dustless cloth, absorbent cotton
Cleaning Procedure| Please follow this procedure (Take dustless cloth as an
example).
- Soak the dustless cloth in the liquid.
- Gently wipe the lens with the dustless cloth
CAUTION
The dustless cloth or cotton wool should be used one time only.
Terms and Definitions
Terms | Definition |
---|---|
FPA (Focal Plane Array) | A type of infrared detector |
IFOV (Instantaneous Field of View) | A resolution measure method of infrared |
thermal camera (that is, the field of view of a pixel)
FOV (Field of View)| The angle of view that the infrared camera can see H is
the horizontal angle and V is the vertical angle.
NETD (Noise Equivalent Temperature Difference)| A measure of image
interference level of infrared thermal camera.
Appendix A Emissivity of Common Materials
Material | Temperature (℃) | Emissivity |
---|---|---|
Water | 0~100 | 0.95~0.98 |
Soil(dry) | 20 | 0.92 |
Soil(wet) | 20 | 0.95 |
Woods | 17 | 0.962 |
Sand | 20 | 0.9 |
Sandstone | 19 | 0.909~0.935 |
PVC plastic | 70 | 0.93 |
Asphalt | 20 | 0.967 |
Paint | 70 | 0.92~0.94 |
Wallpaper | 20 | 0.85~0.90 |
Cloth | 20 | 0.98 |
Concrete | 20 | 0.92 |
Pavement surface | 5 | 0.974 |
Smooth porcelain | 20 | 0.92 |
Ceramic tile | 17 | 0.94 |
Gypsum | 17 | 0.86 |
Bricks | 35 | 0.94 |
Hard rubber | 0~100 | 0.89 |
Charcoal | 20~400 | 0.95~0.97 |
Granite(rough) | 20 | 0.879 |
Cold rolled steel | 70 | 0.09 |
Oxidized steel | 50 | 0.88 |
Copper | 20 | 0.07 |
Oxidized copper | 50 | 0.6~0.7 |
Worth comes from Service
- 24h Hotline : 400-998-3088
- Technical Support Hotline400-883-0800
- Customized Services
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>