daganm KVM-EXTEND38 4K60Hz HDMI KVM Extender User Manual
- June 13, 2024
- daganm
Table of Contents
daganm KVM-EXTEND38 4K60Hz HDMI KVM Extender
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting operating or adjusting this product. Please keep this manual
for future reference.
Package Contents
| Name | Qty |
|---|---|
| HDMI KVM Transmitter (TX, Local Unit) | 1 PC |
| HDMI KVM Receiver (RX, Remote Unit) | 1 PC |
| IR Emitter/Receiver | 1 SET |
| Power Adapters | 2 PCS |
| User Manual | 1 PC |
Compliance
This product is compliant with below standards
Introduction
It is an USB based KVM Extender that features an HDMI Loop Out functionality,
which enables to operate a computer on an UHD 4K HDMI monitor locally, while
providing console access from a separate location at least 60m away. It
extends the transmission range of 4K HDMI, USB keyboard & mouse control
signals up to 60m (4K) or 100m (1080P), enabling users to place the computer
system in a secure and temperature-controlled environment, which maybe
isolated from users’ workstation.
Features
- Using CAT6 cable to extend HDMI signal up to 60m by 4K, or 100m by 1080P;
- Bases on VESA Display Stream Compression (DSC) standard;
- UHD 4K HDMI loop out at Local Unit;
- Support USB consoles (USB keyboard, USB mouse, HDMI monitor);
- Support IR remote control;
- Support analog 3.5mm stereo audio signal extracted from the HDMI stream;
- Compliant with HDMI 2.0 HDCP 2.2 standards.
Specifications
| Function | Description |
|---|
Connectors
| Transmitter | Video Input | HDMI Type A (F) x1, black |
|---|---|---|
| Video Output | HDMI Loop Out, HDMI Type A (F) x1, black | |
| USB In | USB 2.0 Type A (F) x1, black | |
| IR Out | 20 – 60KHz, 3.5mm audio jack (F) x1 | |
| Audio | Audio output, 3.5mm audio jack (F) x1 | |
| Network Connector | RJ45 (F) x1 | |
| Power Input | DC Jack (black), 5V/1A | |
| Receiver | Video Output | HDMI Type A (F) x1, black |
| Consoles | USB1.1 Type A (F) x2, black, | |
| IR In | 20 – 60KHz, 3.5mm audio jack (F) x1 | |
| Audio | Audio output, 3.5mm audio jack (F) x1 | |
| Network Connector | RJ45 (F) x1 | |
| Power Input | DC Jack (black), 5V/1A |
Video
| Max. Data Rate | 18Gbps (6Gbps / lane) |
|---|---|
| Max. Pixel Clock | 600MHz |
| Compliance | HDMI 2.0 HDCP 2.2 |
| Max. Resolution | 2160P@60Hz, 1080P@60Hz |
| Max. Distance | 60m by 4K@60Hz 4:4:4, 100m by 1080P |
Audio
| Input | HDMI Type A (F) x1 |
|---|---|
| Output | HDMI Type A (F) x1, 3.5mm analog audio jack (F) x2 |
Control
| IR | 20 – 60KHz, 3.5mm audio jack (F) |
|---|---|
| Consoles | USB keyboard, USB mouse |
| --- | --- |
LEDs
Transmitter| Power LED (red) x1, SIG In (blue) x1, SIG Out (blue)
x1, Link (blue) x1, RJ45 (green/yellow) x1
Receiver| Power LED (red) x1, SIG Out (blue) x1, Link (blue) x1,
RJ45 (green/yellow) x1
Environmental
Operating Temp.| 0 – 40°C
Humidity| 5 – 85% RH, Non-Condensing
Physical Properties
Housing| Metal
Weight| Transmitter 450g, Receiver 450g
Dimension (L x W x H)| Transmitter/Receiver: 122x89x24 mm
Power Adapters| Input: AC 100 – 240V 50/60Hz; Output: DC 5V/1A
Components
Transmitter (TX, Local Unit) Panel
| Name | Function Description |
|---|---|
| USB IN | Connects with a host computer |
| IR Out | Connects with an IR Emitter cable |
| Audio | Analog audio signal extracted from the HDMI stream, |
connects with a 3.5mm stereo speaker/headphone
HDMI OUT| Connects with a local 4K HDMI monitor
HDMI IN| Connects to a host computer’s HDMI output port
RJ45| Connects to the Receiver/Remote Unit via a CAT6 cable
SIG Out| Blue LED flashes if the HDMI OUT port connected
Link| Always on blue LED means Transmitter function properly
SIG In| Blue LED lights up if the HDMI IN port connected
Power| Red LED lights up if power on
DC5V| Connects with a power adapter, 5V1A
****| Ground Interface
Receiver (RX, Remote Unit) Panel
| Name | Function Description |
|---|---|
| RJ45 | Connects with the Transmitter via a CAT6 cable |
| SIG Out | Blue LED flashes if an HDMI monitor connected |
| Link | Always on blue LED means the Receiver function properly |
| Power | Red LED lights up if power on |
| DC5V | Connects with a power adapter, 5V1A |
| **** | Ground Interface |
| USB OUTPUTS | Connects with an USB keyboard, an USB mouse. USB1.1 |
| IR In | Connects with an IR Receiver cable |
| HDMI OUT | Connects with an HDMI monitor |
| Audio | Analog audio signal extracted from the HDMI stream, |
connects with a 3.5mm stereo speaker/headphone
Installation Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>