tkwser C1DUMt8ybJL Binoculars Night Vision User Manual
- June 13, 2024
- tkwser
Table of Contents
tkwser C1DUMt8ybJL Binoculars Night Vision
PRODUCT OVERVIEW
SPECIFICATION
ABOUT CHARGING
- The device has a built-in rechargeable battery, please fully charge it before first use.
- Please charge by a universal USB power adapter ‘DC 5V/2A’ (not included).
- When charging, the charging indicator located to the right of the
- TYPE-C USB port will turn red. When fully charged, the charging indicator will turn off.
- If the device is completely out of power, it can be fully charged in about 3 to 4 hours.
INSERTING MEMORY CARD
Note: Support Micro SD card up to 326B.
- Open the card slot cover, you will find the card slot. Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
- Format the Micro SD card before using, it will improve battery life, shutter speed, and compatibility of Micro SD card .
- To remove the card from the memory slot, gently press its edge to pop it out.
NOTE: If the Micro SD card is not inserted or not inserted correctly, it will prompt “NO CARD” after power on and the icon of the card with X is displayed at the bottom of right corner. The number of pictures that can be taken or the recording time at the top of right corner will be displayed as 0. When pressing the shutter key, the prompt “No card inserted” will appear.
BASIC OPERATION
TURN ON & TURN OFF
- Press and hold the POWER button for 3 seconds to turn on the device. Press and hold the POWER button for 3 seconds again to turn off the device.
SCREEN
- After turning on, align the night vision device’s lens with the target and adjust the screen to a suitable distance from the eyes.
- Please ensure that the lens and screen are clean and free of stains.
- Please turn on the function of IR in low light or dark conditions.
- Please rotate the focus wheel slowly to get a clear view.
CHANGING THE MODE
- Photograph Mode, Video Mode, and Playback Mode.
- Press the Mode button and you can change modes.
TAKING PICTURES **
**
- Press MODE button to enter into the camera mode.
- Please press the button marked IR+ briefly to activate function of IR in a dark condition. Adjust the level of IR by pressing the button marked IR+ or IR- according to brightness. The darker the environment, the higher the level required. And the highest level of IR is 7.
- Rotate the focus wheel slowly to ensure the screen image is clear.
- Press and hold button or to zoom in or out of the images.
- Press the OK button to take a photo.
RECORDING VIDEO
- Press button to change into Video Mode.
- Please press the button marked IR to activate the function of night vision in a dark condition. Adjust the level of IR by pressing the button marked IR+ or IR- according to the brightness. The darker the environment, the higher the level required. And the highest level of IR is 7.
- Please rotate the focus wheel slowly to get clear views.
- Press and hold 9 or 9 to zoom in or out of the images.
- Press the OK button to start recording. The recording time will be displayed at the bottom of the screen.
- Press the OK button again to finish the recording.
- When the memory card space is insufficient, it’ll automatically stop recording.
PLAYBACK
- Press button to switch to playback mode.
- Press button to browse photo and video files.
- Press the OK button to start recording.
- Press the OK button again to pause video playback.
- Press the button MENU to stop playing videos recorded.
- In playback mode, Click the button MENU to display the playback menu.
Playback Menu List
NOTICE
DEVICE FAIL TO TURN ON
- USB-C port), then press the reset button.
- Please connect the device to the computer using a USB cable. If the device can turn on, it indicates that the device needs to be charged.
- Please remove the memory card and confirm if the device can power on.
POOR IMAGE
- Please rotate the focus wheel slowly to get a clear view.
- Please ensure that there are no stains on the lens and screen.
- If used in the evening or in low light conditions, please make sure that the IR function is turned on (if the IR function is turned on, the screen image will be in black and white).
- If using during the daytime, please turn off the IR function (screen image is in color).
IR FUNCTION
- There are 7 levels of IR function. The darker the surrounding environment, the higher the required level.
- When the battery power of the device is low, the maximum level of the IR light will automatically decrease . The IR light cannot be turned on when the battery is less than 1 bar.
SETTINGS IN PHOTO AND VIDEO MODE
- Press Menu button in photo or video mode, can change the settinas.
DOWNLOAD FILES TO PC
- Take out the Micro SD card from the night vision device and insert it into the card reader. Connect the card reader to the computer and read the files.
- Connect the night vision device to the computer via a TYPE-C USB cable.
CARD READER
- Please take out the Micro SD card and insert it into the card reader. Connect the card reader to the computer and read files.
- Enter [My Computer] or [Windows Explorer], double-click and files will be stored on the disk.
CONNECT DEVICE
TO THE COMPUTER VIA USB
- Turn on the night vision device, and connect it to the computer through TYPE-C USB.
- Select “Storage” on the screen and press OK to enter the transfer disk mode.
- Enter [My Computer] or [Windows Explorer], double-click and files will be stored on the disk.
NOTES ON CLEANING
- Use a dry cloth to wipe the machine’s body.
- Please use a soft, lint-free cloth to clean the lens.
- Protect the device from dust and moisture, and store it in a bag or in a box.
After-Sales Service: ctyg_bs@163.com.
- Please read the manual first before using it.
- Please mail us if you have any problem with the night vision binoculars received at any time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>