SmartVent Evolve2 Home Ventilation Systems Instruction Manual

HOME VENTILATION SYSTEMS

HOME VENTILATION SYSTEMS

SmartVent provides reliable home ventilation to NZ, catering for homeowners and builders that value affordability, efficiency and comfort.
Our intuitive systems are powered by progressive technology to maintain optimal air quality, providing an extra layer of protection against respiratory health threats and keeping the temperature just right all year round.
We’re able to tailor our domestic ventilation services to suit any property, also specialising in POSITIVE PRESSURE SYSTEMS & HEAT & ENERGY RECOVERY SYSTEMS
[email protected] | www.smartvent.co.nz

Visit our website for more information https://www.smartvent.co.nz

SmartVent is a Simx owned brand.

Overview

SmartVent Evolve2 is a centralised positive pressure system that constantly evaluates the environmental dynamics in and around your home. Four temperature and humidity sensors measure moisture content throughout the home, in the roof cavity and outside,
to calculate dew point which is the measure of when condensation will appear on the windows given the internal temperature and moisture conditions combined with the temperature of the coldest surface. This comprehensive and clever solution can then determine how much improved air quality to introduce to effect change without the risk of over−ventilating. Market−leading Evolve2 technology comes with a range of fantastic features such as flexible upgrade options with weekly scheduling, dew point control, all easily navigated with the intuitive wall controller. Just set the preferred temperature and the system does the rest.
Home Ventilation Systems
SmartVent Evolve2 Range
Home ventilation system suitable for most types of homes.

System Extensions

Extension kits can be used to add more outlets to your SmartVent home ventilation system.
Features and Seasonal Add−Ons

Features

Dew Point Control|
---|---
Humidity Sensing|
Temperature Sensing|
Low Temperature Protection|
Auto or Manual Operation|
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|

Seasonal Add−Ons 1)

Summer Feature|
---|---
Heat Transfer|
Tempering Heater|

1. See page 180 for full information on Seasonal Add−On options

Control Your Climate
Comprehensive humidity control protection against moisture, mould and mildew with multiple seasonal add−on options
SV02E2

SV04E2

SV06E2

SmartVent Positive+ Range
Home ventilation system suitable for most types of homes.

Model| Description|

Order Code

---|---|---
SV01P+| 1 room system (expandable to 3 max.) for homes up to 100m2| FAN7280
SV02P+| 2 room system (expandable to 3 max.) for homes up to 100m2| FAN7281
SV04P+| 4 room system (expandable to 6 max.) for homes up to 280m2| FAN7282
SV06P+| 6 room system (expandable to 12 max.) for homes up to 560m2| FAN7283

System Extensions

3m Duct| 6m Duct|

Through Wall

---|---|---
DCT2276| DCT2667| DCT2286

Extension kits can be used to add more outlets to your SmartVent home ventilation system.
Features and Seasonal Add−Ons

Humidity Sensing|
---|---
Temperature Sensing|
Low Temperature Protection|
Auto or Manual Operation|
Rental Property Lock|
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|

Seasonal Add−Ons 1)

Summer Feature|
---|---
Heat Transfer|
Tempering Heater|

Condensation Control Plus
Integral humidity guard against moisture, mould and mildew with multiple seasonal add−on options

FAN0939
SV04P2| 4 system outlets (expandable to 6 max.) for homes up to 280m 2| FAN1057
SV06P2| 6 system outlets (expandable to 12 max.) for homes up to 560m 2| FAN1064

System Extensions

Extension kits can be used to add more outlets to your SmartVent home ventilation system.
Features and Seasonal Add−Ons

Temperature Sensing|
---|---
Low Temperature Protection|
Auto or Manual Operation|
Rental Property Lock|
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|

Seasonal Add−Ons1)

Summer Feature|
---|---
Heat Transfer|
Tempering Heater|

1. See page 180 for full information on Seasonal Add−On options

Control Condensation
Reduce moisture, mould and mildew with multiple seasonal add−on options

SmartVent Lite+
Overview
SmartVent Lite+ is a home ventilation system that monitors both temperature conditions and humidity to ensure that you are protecting your home or rental property with quality air always circulating and keeping the property dry. As a temperature and humidity based solution, in winter, SmartVent Lite+ not only introduces air faster when warmer and slower when cooler, the system also measures the moisture content in the home and of the incoming air and uses this data to reduce under or over ventilation. The rental lock feature enables a property owner to lock the controller to prevent tenants from switching the system OFF while still allowing system temperatures, fan speeds and ventilation scheduler adjustments to suit the lifestyles/needs of the occupants. Low temperature protection, set at a user adjustable default setting of 5°C, ensures that continuous cold air is not introduced when the incoming air conditions are too cold.
SmartVent Lite+ Range
Home ventilation system suitable for most types of homes.

Model| Description|

Order Code

---|---|---
SV01L+| 1 room system (expandable to 3 max.) for homes up to 100m2| FAN7270
SV02L+| 2 room system (expandable to 3 max.) for homes up to 100m2| FAN7271
SV04L+| 4 room system (expandable to 6 max.) for homes up to 280m2| FAN7272
SV06L+| 6 room system (expandable to 12 max.) for homes up to 560m2| FAN7273

System Extensions
3m Duct
DCT4276
Extension kits can be used to add more outlets to your SmartVent home ventilation system.
Features

Humidity Sensing|
---|---
Temperature Sensing|
Low Temperature Protection|
Auto or Manual Operation|
Rental Property Lock|
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|

Investment Protection Plus
Cost effective solution including an integral humidity guard against moisture, mould and mildew

SmartVent Lite2
Overview
SmartVent Lite2 is an economical home ventilation system that monitors temperature conditions to ensure that you are protecting your home or rental property with quality air always circulating. As a standard temperature−based solution, bringing air in faster when warmer and slower when cooler, SmartVent Lite2 is commonly referred to as a “Landlord Solution” or a cost−effective solution to protecting their property investment. The rental lock feature enables a property owner to lock the controller to prevent tenants from switching the system OFF while still allowing system temperatures, fan speeds and ventilation scheduler adjustments to suit the lifestyles/needs of the occupants. Low temperature protection, set at a user adjustable default setting of 5°C, ensures that continuous cold air is not introduced when the incoming air conditions are too cold.
SmartVent Lite2 Range
Home ventilation system suitable for most types of homes.

Model| Description|

Order Code

---|---|---
SV01L2| 1 room system (expandable to 3 max.) for homes up to 100m2| FAN6803
SV02L2| 2 room system (expandable to 3 max.) for homes up to 100m2| FAN6804
SV04L2| 4 room system (expandable to 6 max.) for homes up to 280m2| FAN6805
SV06L2| 6 room system (expandable to 12 max.) for homes up to 560m2| FAN6806

System Extensions

3m Duct
DCT4276
Extension kits can be used to add more outlets to your SmartVent home ventilation system.
Features

Temperature Sensing|
---|---
Low Temperature Protection|
Auto or Manual Operation|
Rental Property Lock|
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|

Protect Your Investment
Cost effective solution to reduce moisture, mould and mildew

Positive Pressure Systems

Selection Guide

What is the size of your
home (m²)?| Range selection| How many rooms do you
wish to distribute to?| Model| Product Codes
---|---|---|---|---
Up to 100m²| SmartVent Evolve2
SmartVent Positive+
SmartVent Positive2| 1| SV01P+
SV01P2| FAN7280
FAN2023
2| SV02E2
SV02P+
SV02P2| FAN6910
FAN7281
FAN0939
3| Extension Kit| DCT2276
SmartVent Lite+
SmartVent Lite2| 1| SV01L+
SV01L2| FAN7270
FAN6803
2| SV02L+
SV02L2| FAN7271
FAN6804
3| Extension Kit| DCT4276
Up to 280m²| SmartVent Evolve2
SmartVent Positive+
SmartVent Positive2| 4| SV04E2
SV04P+
SV04P2| FAN6911
FAN7282
FAN1057
5 − 6| Extension Kit| DCT2276
SmartVent Lite+
SmartVent Lite2| 4| SV04L+
SV04L2| FAN7272
FAN6805
5 − 6| Extension Kit| DCT4276
Up to 560m²| SmartVent Evolve2
SmartVent Positive+
SmartVent Positive2| 6| SV06E2
SV06P+
SV06P2| FAN6912
FAN7283
FAN1064
7 − 12| Extension Kit| DCT2276
SmartVent Lite+
SmartVent Lite2| 6| SV06L+
SV06L2| FAN7273
FAN6806
7 − 12| Extension Kit| DCT4276

IMPORTANT

•  If you exceed the number of rooms listed in the selection guide above, the performance of the system will not work as designed.
  Your system should be reviewed with SmartVent before purchase and installation.

• Maximum outlets are listed above, do not exceed the number listed.

• For the SV06 systems do not exceed 3 additional extension kits per branch of the system.

• DCT1491 and DCT3418 consist of 2 x 1kW units for installation into each branch of an SV06P, SV06P2, SV06P+ or SV06E2 system.
  **DCT4613 consists of 2 x 2 kW heaters for installation into each branch of an SV06P2, SV06P+ or SV06E2 system.

Add−On Kits| SV01P+ SV01P2 SV01P| SV01L+ SV01L2| SV02E2 SV02P+ SV02P2 SV02P| SV02L+ SV02L2| SV04E2 SV04P+ SV04P2 SV04P| | SV04L+ SV04L2| SV06E2 SV06P+ SV06P2 SV06P| | SV06L+ SV06L2
---|---|---|---|---|---|---|---|---|---|---
3m Duct| DCT2276| DCT4276| DCT2276| DCT4276| DCT2276| | DCT4276| DCT2276| | DCT4276
Additional Room| 6m Duct| DCT2667| −| DCT2667| −| DCT2667| | −| DCT2667| | −
Through Wall| DCT2286| −| DCT2286| −| DCT2286| | −| DCT2286| | −
Additional Fan| 150mm
200mm| FAN5836| −
−| FAN5836
FAN5837| −
−| FAN5836
FAN5837| | −

−

| FAN5836
FAN5837| | −
−
FAN5837
Outdoor Air Supply| SV01P2 SV01P| SV01L2| SV02E2 SV02P2 SV02P| SV02L2| −| | −| −| | −

Controllers and Componentry

These recommendations are based on the standard components in the system.
− This selection guide assumes 2.4m stud height, if greater please increase the square metre size by 4% for every 0.1 metre.
For example for a 2.8m stud height, increase your house size by 16%.
− If you choose to exceed the number of rooms listed in the selection guide above, the performance of the system will be affected.
− By adding additional outlets to the system the available air is being divided amongst more rooms.
− Extra duct may be required depending on the size and layout of the home (see Accessories on page 196).
− For larger homes please contact SmartVent for technical advice on 0800 140 150.

Specifications

Positive Pressure Systems Seasonal Upgrades

Summer Feature

Seasonal Add−On| SV01P+ SV01P2 SV01P| SV01L+ SV01L2| SV02E2 SV02P+ SV02P2| SV02L+ SV02L2| SV04E2 SV04P+ SV04P2 SV04P| SV04L+ SV04L2| SV06E2 SV06P+ SV06P2 SV06P| SV06L+ SV06L2
---|---|---|---|---|---|---|---|---
Summer Feature| DCT2134| −| DCT2134| −| DCT2128| −| DCT2135| −

Home Ventilation Systems

The Summer Feature seasonal add−on is an optional second air intake located under the eaves or at the gable end of the home (weatherproof grille maybe required). This feature provides an alternative air supply for use during summer months.

• When installed on the south side of the house it ensures the coolest possible air is used.
• If the house design prevents the installation of a Summer Feature Seasonal Add−On, there are alternative options for a second air source such as through roof kits. SmartVent have a full range of accessories available to assist.

Outdoor Air Supply

Kit| SVO1 P2
SVO1P| SVO1 L2| SVO2E2
SVO2P2
SVO2P| SVO2L2| SVO4E2 SVO4P+ SVO4P2 SVO4P| SVO4L+
SVO4L2| SVO6E2 SVO6P+ SVO6P2 SVO6P| SVO6L+
SVO6L2
---|---|---|---|---|---|---|---|---
Outdoor Air Supply| FAN6264| –

The outdoor supply kit is designed specifically for SV01 & SV02 systems when roof cavity air is not desirable.
The kit contains a fixed grille, duct and filter spigots.*

• All other systems include these parts in the standard kit.

Heat Transfer

Seasonal
Add−On| SV01P+
SV02P2
SV01P| SV01L+
SV01L2| SV02E2
SV02P+
SV02P2
SV02P| SV02L+
SV02L2| SV04E2
SV04P+
SV04P2
SV04P| SV04L+
SV04L2| SV06E2| SV06P+
SV06P2
SV06P| SV06L+
SV06L2
---|---|---|---|---|---|---|---|---|---
Heat Transfer| FAN2027| −| FAN2027| −| FAN2028| −| FAN2028
(1 branch)| −|
| FAN4438 (2 branch)

Heat Transfer has a motorised damper that operates to switch the air drawing from either the outside or roof cavity to instead draw air from the room where there is a heat source (usually a lounge) and transfer it to the bedrooms. This seasonal add−on can also provide internal air circulation when roof cavity and/or outside temperatures are too cold. When installing a Heat Transfer seasonal add−on, an adequate heat source is required that is capable of delivering enough excess heat to warm rooms it is transferred to, while remaining effective in the source room.

•  It is important to point out that when Heat Transfer is activated, the system is not bringing in fresh air, therefore not ventilating the home – however the home is getting the benefit of transferring heat around the house (e.g. cold winter nights). It also shuts off the air supply back into the heat source room.

Note:

• Heat Transfer is recommended when there is a heat source that creates excess heat (i.e. wood fire or similar).
• A heat pump sized for the room it occupies may not be suitable for Heat Transfer.
•  If planning to use a heat pump with Heat Transfer, first consult the heat pump installer/manufacturer.

Positive Pressure Systems Seasonal Upgrades
Tempering Heaters

| Seasonal Add−Ons| SV01P+
SV01P2| SV01P| SV01L+
SV01L2| SV02E2
SV02P+
SV02P2| SV02P| SV02L+
SV02L2| SV04E2
SV04P+
SV04P2| SV04P| SV04L+
SV04L2| SV06E2
SV06P+
SV06P2| SV06P| SV06L+
SV06L2
---|---|---|---|---|---|---|---|---|---|---|---|---|---
Tempering
Heater| 1 kW| DCT3478| DCT1226| −| DCT3478| DCT122| −| DCT3231| DCT1483| −| DCT3231| DCT1483| −
2 x 1 kW*| −| −| −| | | −
2 kW| −| −| DCT3230| DCT1484| −| | | −
2 x 2 kW**| −| −| −| DCT4613| −| −

• DCT1491 and DCT3418 consist of 2 x 1kW heaters for installation into each branch of an SV06P, SV06P2, SV06P+ or SV06E2 system.
  **DCT4613 consists of 2 x 2 kW heaters for installation into each branch of an SV06P2, SV06P+ or SV06E2 system.

A Tempering Heater is a 1kW or 2kW element inline heater designed to take the chill off incoming air.

• Specified when the ability to temper the delivered air to a more comfortable temperature is required.
•  Tempering heaters will not provide a home heating solution.
•  Using a 1kW heater, the temperature of the introduced air can be raised by up to 8°C. The temperature of the home will not increase by this much.
• A SmartVent system with an inline tempering heater is not intended to be a substitute for an effective heating system in the home.

Positive Pressure Systems Add−on Kits
Additional Outlets

Kit| SV01P+
SV01P2
SV01P| SV01L+
SV01L2| SV02E2
SV02P+
SV02P2
SV02P| SV02L+
SV02L2| SV04E2
SV04P+
SV04P2
SV04P| SV04L+
SV04L2| SV06E2
SV06P+
SV06P2
SV06P| SV06L+
SV06L2
---|---|---|---|---|---|---|---|---
Additional
Room| 3m Duct| DCT2276| DCT4276| DCT2276| DCT4276| DCT2276| DCT4276| DCT2276| DCT4276
6m Duct| DCT2667| −| DCT2667| −| DCT2667| −| DCT2667| −
Through
Wall| DCT2286| −| DCT2286| −| DCT2286| −| DCT2286| −

Additional Fans

Kit| SV01P+
SV01P2
SV01P| SV01L+
SV01L2| SV02E2
SV02P+
SV02P2
SV02P| SV02L+
SV02L2| SV04E2
SV04P+
SV04P2
SV04P| SV04L+
SV04L2| SV06E2
SV06P+
SV06P2| SV06P| SV06L+
SV06L2
---|---|---|---|---|---|---|---|---|---
Additional
Fan| 150mm| FAN5836| −| FAN5836| −| FAN5836| −| FAN5836| −
200mm| FAN5837| −| FAN5837| −| FAN5837| −| FAN5837| −

An additional fan kit allows an additional branch with fan, filter and outlet to be fitted to the system. The additional fan kits enable a single controller to operate two systems where longer duct runs or between floor configurations would normally be required.

SmartVent Synergy2

Overview
SmartVent Synergy2 is a centralised energy or heat recovery system that constantly evaluates the environmental dynamics in and around your home. Four temperature and humidity sensors measure moisture content throughout the home, in the roof cavity and outside, to calculate dew point which is the measure of when condensation will appear on the windows given the internal temperature and moisture conditions combined with the temperature of the coldest surface. This comprehensive and clever solution can then determine how much improved air quality to introduce to effect change without the risk of over−ventilating. At the heart of these systems the exchange of heat energy from the outgoing air to the incoming air provides an excellent solution for homes built
after 2002.

SmartVent Synergy2 Range
Home ventilation system best suited to homes built to modern standards

• Contact SmartVent for design advice if more outlets or extracts are required
  System Extensions

Extension kits can be used to add more outlets and extracts to your SmartVent home ventilation system.
Features and Seasonal Add−Ons

Features| SYN1015E2
SYN2025E2
SYN3035E2
---|---
Dew Point Control|
Humidity Sensing|
Temperature Sensing|
Low Temperature Protection|
Auto or Manual Operation|
Core Efficiency (ºC)| Up to 75%
Boost Control|
Filter Change Alert|
Screen Brightness Control|
Scheduler|
Seasonal Add−Ons¹ )
Flexible Air Source − Roof Cavity|
Heat Transfer|
Tempering Heater|

1. See page 194 for full information on Seasonal Add−On options

Control Indoor Climate
Reduce moisture, mould and mildew with multiple seasonal add−on options

SmartVent Synergy2

Overview
SmartVent Tempra is a single room heat recovery unit suitable for residential retrofit and new builds, elderly care facilities, student accommodation, military barracks and apartments.
SmartVent Tempra meets the performance requirements for continuous ventilation under the NZ Building Regulations.
With a 100mm diameter heat recovery outlet, these units have low energy consumption and low noise levels.
Based on a 2.4m stud and 0.35 ACH (as per NZS4303.1990), SmartVent Tempra can be set to run continuously at 6 l/s (for rooms up to 25m² ) or 9 l/s (for rooms up to 37m2), boosting up to 13 l/s, recovering energy from the extracted air and returning it to the dwelling.
The unique, compact heat exchanger has a temperature efficiency up to 80%, saving energy and reducing your carbon footprint while providing quality ventilation in situations where a traditional heat recovery ventilation system is not practical.
SmartVent Tempra Range

Constant trickle ventilation (24 hours, 7 days) with airflow boost option.
Separated airflows so that extracted moisture extracted is not re−introduced.
Consistently higher heat recovery than units that use “extract−supply cycling” methods.
Low energy consumption.
Low noise.
Security − reduces risk of theft as windows are not required to be left open.
Can be switched to ‘extract only’ if desired.

Heat Exchanger

Dimensions (mm)

Performance

• Octave band frequency range of 250Hz to 4KHz at 3m. Unit mounted on a reflective surface.
  SmartVent Fresh
  SmartVent Fresh Range

Dimensions (mm)

Heat and Energy Recovery Systems

Selection Guide

Home Ventilation Systems

IMPORTANT
− The information listed above is a guide only. If there is any doubt, please use our design service

These recommendations are based on the standard components in the system.
− This selection guide assumes 2.4m stud height, if greater please increase the square metre size by 4% for every 0.1 metre (e.g. for a 2.8m stud height, increase your house size by 16%).
− If you choose to exceed the number of rooms listed in the selection guide above, the performance of the system will be affected.
− Ensure that there is sufficient ceiling space to install all componentry.
− By adding additional outlets to the system the air is being divided amongst more rooms.
− Extra duct may be required depending on the size and layout of the home (see Accessories on page 196).
− For larger homes, or advice on adding outlets or extracts, please contact SmartVent for technical advice on 0800 140 150.
Controllers & Componentry

Recovery Core Types

Specifications

Specifications| SYN1015E2| SYN2025E2| SYN3035E2| BAL225|

BAL405

---|---|---|---|---|---
Fan Type| AC Centrifugal| AC Centrifugal| AC Centrifugal| EC Centrifugal| EC Centrifugal
Max. Fan Cores| 2| 2| 2| −
Spigot Size| 150mm| 150mm| 150mm| 125mm| 150mm
Fan Speeds| 3| 3| 3| 10| 10
Max. Air Flow per Fan @ 0 Pa| 55 l/s, 198m3/hr| 84 l/s, 301m3/hr| 122 l/s, 440m3/hr| 76 l/s, 275m3/hr| 136 l/s, 490m3/hr
Max. Air Flow per Fan @ 150 Pa| 29 l/s, 106m3/hr| 51 l/s, 183m3/hr| 93 l/s, 333m3/hr| 62 l/s, 223m3/hr| 110 l/s, 395m3/hr
Max. Static Pressure per Fan| 263 Pa| 308 Pa| 401 Pa| 380 Pa| 600 Pa
Power Supply| 220−240V AC
50 Hz| 220−240V AC
50 Hz| 220−240V AC
50 Hz| 220−240V AC
50 Hz| 220−240V AC
50 Hz
Total Input Power| 95W| 136W| 215W| 128W| 173W
Current (A)| 0.45A| 0.66A| 1.03A| 0.58A| 0.79A
Operating Temp| −10ºC to 40ºC| −10ºC to 40ºC| −10ºC to 40ºC| −20ºC to 45ºC| −20ºC to 45ºC
Sound Level| 31.5 dB(A)| 34 dB(A)| 37 dB(A)| 39 dB(A)
Energy Recovery Core Dimensions (mm)| A| B| C
---|---|---|---
SYN1015E2| 220| 625| 750
SYN2025E2| 220| 650| 820
SYN3035E2| 230| 770| 960

Heat and Energy Recovery Systems Seasonal Upgrades

Roof Cavity Air Supply

Roof Cavity Air Supply is an optional second air intake located in the roof cavity. This seasonal add−on allows the system to utilise the roof cavity temperature for increased air source flexibility.

Heat Transfer

Heat Transfer has a motorised damper and external fan that operates to switch the air drawing from either the outside or roof cavity to instead draw air from the room where there is a heat source (usually a lounge) and transfer it to the bedrooms. This feature can also provide an alternative air supply. When installing a Heat Transfer feature, an adequate heat source is required that is capable of delivering enough excess heat to warm rooms it is transferred to, while remaining effective in the source room.
− It is important to point out that when Heat Transfer is activated, the system is not bringing in fresh air, or extracting stale air, therefore not ventilating the home − however the home is getting the benefit of transferring heat around the house  (e.g. cold winter nights). It also shuts off any supply back into the heat source room.
Note:
− Heat Transfer is recommended when there is a heat source that creates excess heat (i.e. wood fire or similar).
− Heat Transfer can also be used to manage the preferred temperature and moisture conditions in the home when added to a SmartVent Synergy2 system.
− A heat pump sized for the room it occupies may not be suitable for Heat Transfer.
− If planning to use a heat pump with Heat Transfer, first consult the heat pump installer/manufacturer.

Recycle
The Recycle function will recycle inside air around the home when other air sources are not suitable. The recycle function for SmartVent Synergy2 systems is a feature of the Heat Transfer upgrade.
Tempering Heater

A Tempering Heater is an element in line heater designed to temper the incoming air.
− Specified when the ability to temper the delivered air to a more comfortable temperature is required.
− Tempering heaters will not provide a home heating solution.
− The temperature of the introduced air can be raised by up to 8°C. The temperature of the home will not increase by this much.
− A SmartVent system with an inline tempering heater is not intended to be a substitute for an effective heating system in the home.

Core Bypass

This feature diverts fresh filtered air around the core. This is useful in summer when the outside temperature is assumed to be lower than the inside and you do not want to warm the incoming air with the air you are extracting from the home. A Core Bypass is included as standard in Balance BAL225 and BAL405.
− The Core Bypass enables the system to bypass the core in the summer when heat recovery is not desirable.
In the summer, Core Bypass ensures the coolest possible air is used to ventilate the home.
Additional Outlets and Extracts

Additional Fans

An additional fan kit allows an additional branch with fan, filter and outlet to be fitted to the system. The additional fan kits enable a single controller to operate two systems where longer duct runs or between floor configurations would normally be required.

Accessories

Acoustic Insulated Duct

Insulated Duct

Nude Duct

Duct Fasteners

Duct Connectors

Y Branch

Branch Take Off

Double Branch Take Off

Fixed Louvre Grilles − White Plastic

Ceiling Diffuser − Square White Plastic

Extract Diffuser − Round White Plastic

Noise Reduction Fan Housing

Replacement Filters

Replacement G3 Filters (2 Pack)

Extension Leads

PureAir Room 260X

PURIFY YOUR INDOOR AIR FOR A HEALTHIER HOME ENVIRONMENT
Overview
The Vent-Axia PureAir Room provides a safe space for people suffering from allergies or who want to be sure they are not breathing in harmful pollutants and wish to improve their indoor air quality. The filters of an air purifier will remove airborne contamination and allergens such as dust, pollen, animal dander, dust mites, tobacco smoke, traffic fumes and more. Removing these can make a positive impact to the indoor air you breathe and therefore help to improve your health and wellbeing.

Mycotoxins released by mould spores can cause headaches, eczema & lung conditions such as asthma

House hold dust can be an irritant to our skin and lungs. It is also perfect food for dust mites which produce allergens

Bacteria and viruses spread easily around the home in the air causing cold and flu like symptoms

Odour can be unpleasant but odour also caused by pollutants like aerosols and air fresheners are detrimental health
PureAir Room 260X Range

Technical

Advanced 6 Stage Filtration System

www.simx.co.nz

Documents / Resources

| SmartVent Evolve2 Home Ventilation Systems [pdf] Instruction Manual
Evolve2 Home Ventilation Systems, Evolve2, Home Ventilation Systems, Ventilation Systems, Systems
---|---

References

• Automated Home Ventilation Systems NZ - SmartVent

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>