MJKSARE 231128 3 In 1 High Chair Instruction Manual

Table of Contents

MJKSARE 231128 3 In 1 High Chair Instruction Manual

Please read the manual carefully before installing and using the product.

The illustrations used in this manual are intended to illustrate the operation method and product structure of the product. When there is a small difference in the picture, please refer to the actual product.
In order to improve the quality of the product, we may change the part of the product without notice. Please understand that the structure and appearance are sub-structured.

Warning!

“Do not get near fire” or expose to high temperatures, and do not place it in a dark, damp place.
Please replace or repair damaged parts in time.
Do not use if the high chair is damaged or broken.
Always check that all parts of the highchair are working properly.
When the child is sitting in the dining chair, please do not move it at will.
Before use, make sure that no part of your child’s body is stuck in the movable part of the dining chair.
It is forbidden to use at the pool, in rugged and dangerous places.
Make sure the seat belt is fastened and the seat belt is ready for your child.
In order to prevent the child from falling or slipping from the dining chair, the seat belt must be used when riding.
It is forbidden to put the child on the plate.
Do not leave your child alone in the absence of care to avoid danger.
Before use, please make sure that all parts of the dining chair are fixed.
The maximum weight of this dining chair is 20 kg.
It is forbidden for children under 6 months. This product is suitable for ages from 6 to 36 months.
Please read this manual carefully and keep it for future reference.

component introduction

When cleaning, gently wipe the stain with a damp cloth.

When not in use, please clean the chair, dry it, and store it in a dry, cool environment.

Do not place the high chair in a place where the sun can be directly exposed to avoid
aging and fading of the plastic.

If the parts such as the shrapnel and screws of the chair are loose or lost, please repair them in time.

Step 1: Combine the two parts of the seat (the holes on the left and right sides of the seat correspond respectively).
Step 2: Insert the screws into the holes on both sides of the seat, and then tighten. them with the screwdriver.
Step 3 : Assemble the thigh ends (steel pipes of the same size at both ends) with the pedals.
Step 4: Insert the other end of the upper leg assembled with the pedal (a steel pipe with the same size at both ends) into the black hole on the side of the seat and fix it.
Step 5 : Then secure the lower, smaller end of the support leg to the thigh.
Step 6: Insert the foot pads into the notched ends on the lower part of the support legs.
Step 7: Insert the storage bag into the hole on the pedal from bottom to top. Then put the cushion into the seat and insert the five-point safety belt into the holes of the cushion and the seat respectively.
Step 8: Press and hold the button below the plate to insert the plate into the dining chair to complete the installation.