BOSCH BHU3600 Kiox 300 Drive System Owner’s Manual

BHU3600 Kiox 300 Drive System
Owner’s Manual

Introduction

This manual contains many DANGER, WARNING, and CAUTION indicators concerning the consequences of failure to use, assemble, maintain, store, inspect and dispose of  a Bosch-equipped eBike in a safe manner.

• The combination of the safety alert symbol and the word DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• The combination of the safety alert symbol and the word WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
• The combination of the safety alert symbol and the word CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

General Warnings

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in death or serious injury.
Save all safety warnings and instructions for future reference.
The term battery pack used in these operating instructions refers to all original Bosch eBike battery packs.

WARNING

• This manual contains important safety, performance, and service information. Read it before you take the first ride on your new bicycle, and keep it for reference. The manual can also be found online at www.bosch-ebike.com.

• This manual is intended to be read together with the separate user manual provided with your bicycle. Be sure to read all provided documents including labels on the product before your first ride.

• Read ALL accompanying manuals before riding the bike for the first time. Your Bosch Drive System comes with additional manuals and documents provided by the manufacturer of the bicycle and other components. Failure to read and understand safety information can result in death or serious injury.

• Take responsibility for your own SAFETY. If you have any questions or do not understand something, consult with your dealer or the bicycle or component manufacturer.

• Some eBike accessories may present a choking hazard to small children. Keep these accessories away from children.
  CAUTION

• The Bosch Drive System adds weight to your bicycle which you may not be used to lift. Avoid injury, use proper lifting techniques.

Using your Manual

In addition to the functions outlined here, changes to software relating to troubleshooting and functional modifications may be introduced at any time.
Graphics
The bicycle shown in this manual may differ slightly from your bicycle but will be similar enough to help you understand our instructions.
RIGHT-HAND and LEFT-HAND sides are determined by facing in the direction the bicycle will travel when going forward. When you see a broken line (——), the item referred to is hidden from view.

Operating your Bosch Display Unit

Safety instructions

Read all the safety information and instructions. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery pack used in these operating instructions refers to all original Bosch eBike battery packs.

• Do not attempt to fix the display or remote control
  while riding!

• Do not allow yourself to be distracted by the display of the onboard computer.
  If you do not concentrate exclusively on the traffic around you, you risk being involved in an accident. If you want to change any settings on the onboard computer other than the assistance level, always stop before entering the relevant data.

• Set the display brightness such that you can adequately see important information like speed or warning symbols. An incorrectly set display brightness can result in dangerous situations.

• Do not open the onboard computer. Opening the onboard computer can result in irreparable damage and void your warranty.

• Do not use the onboard computer as a handle.
  Lifting the eBike up by the on-board computer can cause irreparable damage to the on-board computer.

• Do not stand your bicycle upside down on its saddle and handlebars if the onboard computer or its holder protrudes from the handlebars. This may irreparably damage the n-board computer or the holder. Also, remove the onboard computer before placing the bicycle on a wall mount to ensure that the onboard computer does not fall off or become damaged.

• Do not enter information or make selections while riding. Interacting with the display unit while riding can lead to accidents causing serious injury or death. You must observe road and traffic conditions, and comply with traffic laws at all times.

• Accessing other apps, reading pop-up messages/other content, or otherwise using your mobile device while operating an eBike may be distracting. Distracted driving is a  serious safety concern and can lead to accidents causing serious injury or death. In order to prevent distracted driving, most mobile devices come equipped with a “Do Not  Disturb” mode. The “Do Not Disturb” mode should be used while operating an eBike. Please consult your device-specific instructions for more information. You, as the eBike operator, are fully responsible for ensuring that you pay attention to road conditions and comply with traffic laws at all times.

• Do not activate the push assistance function while riding on the bike. Only use the push assistance function when pushing the bike.

• Please note that certain State or local laws may require that class III e-bikes must be equipped with a functioning speedometer that displays speed in miles per hour.  Riders must be aware of any and all applicable rules and regulations related to the operation or use of class III e-bikes in any applicable jurisdictions before operating or otherwise using this product.

NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device must not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTICE: Changes or modifications made to this equipment not expressly approved by the Robert osch GmbH may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES3(B)/NMB3(B)
Responsible Party for North America:
Bosch eBike Systems Americas
Robert Bosch LLC
27211 Burbank, Foothill Ranch, CA 92610, USA,
www.bosch-ebike.com/us/

Privacy notice
If the onboard computer is sent to Bosch Service because it requires servicing, the data stored on the onboard computer may be transmitted to Bosch.

Product Features Kiox 300

Intended use
The Kiox 300 onboard computer is designed to display cycling data.
To access the full functionality of the Kiox 300 onboard computer, you will need a compatible smartphone installed with the eBike Flow app (available from the Apple App  Store or the Google Play Store).

Technical data

A) Temperatures outside of this range may cause faults in the display.

Assembly

Inserting and Removing the Display (see figure A)

To fit the display (1), attach the display (1) to the front edge of the display fixture (9) in the direction of travel, on the latching hook (5) ❶ and press the rear side of the display (1) on the display fixture (9) ❷.
To remove the display (1), pull the display (1) towards you ❶ until you are able to lift off the display (1)  ❷. A retaining strap can be secured to the bridge (11).

Inserting the Locking Plate (see figure B)

Insert the locking plate (4) into the adapter shell (6) from below until you hear the locking plate (4) click into place.
From this point onwards, you can no longer lift off the display (1) from the display fixture (9) without removing the display fixture (9) from the adapter shell (6) by loosening the two fastening screws (10).
Note: The locking plate (4) is not an anti-theft device.

Operation

The displays are operated and the indicators are controlled via a control unit.
The meaning of the buttons on the control unit for the display indicators can be found in the following overview. Depending on how long it is pressed, the select button has two functions.

| Scroll to the left
---|---
| Scroll to the right
| Scroll up
| Scroll down
| Change to the second-page level (press briefly)
| Open page-related options (e.g. )
Open the settings menu (Press and hold > 1 s)

Start page
If you did not select another page before the last time you switched off, you will be shown this page.

a Battery charge
b Assistance level
c Bicycle lights
i Unit of speed indicator
j Indicator name
k Your output
l Speed
m Motor output
The a and c indicators form the status bar and are shown on every page.
You can use the button to change from this page to the status page or press the button to access additional pages. Your statistical data, the battery range, and the average values are displayed on these pages.
From each of these pages, you can access the second level of data by pressing the button.
If the user is on a different page to the start page when they switch off, the most recently displayed page will appear again when the eBike is switched on.
Pressing and holding the select button enables you to reset the statistical data for your journey or excursion (not on the < SETTINGS> page).

Status screen
From the start page, you can access the status page by pressing the button.

a Battery charge
b Assistance level
c Bicycle lights
d Time
e Connection indicator
f Smartphone connection
g Settings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding. The settings menu contains the following menu items: – You can find the following menu items here.

• The value for the range can be reset here.
• The settings for automatic reset can be adjusted here.
• The value of the wheel circumference can be adjusted or reset to the standard- setting here.

• < Components>
  The components used with their version numbers are displayed here.
  –
  You can find the following menu items here.

• < Language>
  You can select your preferred system language here.

• < Units>
  You can choose between metric or imperial measurements here.

• < Time>
  You can set the time here.

• < Time format>
  You can select one of the two time formats here.

• < Brightness>
  You can set the display brightness here.

• < Settings reset>
  You can reset all of the system settings to the default values here.
  – Under the < Information> menu item, you will find the contact details ( < Contact>) and certificates ( < Certificates>).
  You can leave the settings menu by pressing the button.
  Press the button to access the start page.

Maintenance and cleaning

Do not clean any of the components with pressurized water.
Keep the screen of your onboard computer clean.
Dirt can cause faulty brightness detection.
Clean your onboard computer using a soft cloth dampened only with water. Do not use cleaning products of any kind.
Have your eBike system checked by an expert at least once a year (including mechanical parts, and up-to-dateness of system software).

The bike retailer can also schedule the service based on mileage and/or a time period. In this case, the onboard computer displays a message telling you when the service date is due each time it is switched on.
Please have your eBike serviced and repaired by an authorized bicycle dealer.

• Only have repairs performed by a certified bicycle dealer.

After-sales service and advice on using products

If you have any questions about the eBike system and its components, contact an authorized bicycle dealer.
For contact details of authorized bike dealerships, please visit www.bosch- ebike.com.

Disposal
The drive unit, on-board computer incl.
operating unit, battery, speed sensor, accessories and packaging should be disposed of in an environmentally correct manner.
Do not dispose of eBikes and their components with household waste.
Please return Bosch eBike components that are no longer usable to an authorized bicycle dealer. Subject to change without notice.

References

• Bosch eBike Systems | Premium drives for eBikes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>