SURGICALLY CLEAN AIR 6000C Cascade Air Purifier User Guide
- June 13, 2024
- SURGICALLY CLEAN AIR
Table of Contents
QUICK SET-UP GUIDE
CASCADE WHITE (6000C)
CLEAN AIR 6000C Cascade Air Purifier
-
Unpack the Air Purifier
A. Remove the Cascade White Air Purifier from the shipping carton
-
Remove the Front Panel & Pre-Filter
A Remove the front panel
B Remove the pre-filter by pulling and turning the two (2) clips and taking it out
-
Remove the Electronic Cell
A Remove the upper and lower packing plates by removing the wing nuts and pulling the plates out of the air purifier – discard plates
B Remove the electronic cell by using the two (2) handles to pull the electronic cell straight out of the air purifier
-
Remove the Carbon Plus Filter
A Pull out the carbon plus filter from behind the electronic cell by using the green tab on bottom of the carbon plus filter
B Remove the carbon plus filter from the protective plastic bag
C Reinsert the carbon plus filter back into place with the green tab at the bottomfacing out
-
Reassemble the Air Purifier
A Replace the electronic cell back into the air purifier
B Replace the pre-filter in front of the electronic cell and rotate the brackets to hold in place
C Replace the front panel
-
Remove the Carbon Plus Filter
A Turn ON the Air Purifier
B Press the ‘POWER’ button to turn on the air purifier
C Set your desired fan speed (Low, Medium, High)
D Make sure that the ‘UV LAMP’ is ON (lit when on) to ensure that
the air purifier’s germ killing function is activated -
If desired, turn the negative ions ON by pressing the ‘NEG. ION’ button (lit when on) to re-energize the air as it leaves the air purifier and enters the room
MAKING YOUR INDOOR AIR THIS CRYSTAL CLEAR