HOOVER HOBL3518FK Integrated Fridge Freezer Instruction Manual

HOOVER HOBL3518FK Integrated Fridge Freezer Instruction Manual

Instruction

1. Control Panel
2. Shelves
3. Crisper
4. Freezer Boxes
5. Door rack

• The most energy-saving configuration requires drawers, food box and shelves to be positioned in the product, please refer to the above pictures.
  ** The pictures above are only for reference. The actual configuration will depend on the physical product or statement by the distributor.

USE

1. ON/OFF key, used to switch on/off the appliance.
2. SET key, used to adjust the temperature or to select Super Cool or Eco functions.
3. Cooling levels, show which is the selected cooling level.
4. Super Cool icon, shows if the function is activated.
5. Eco icon, shows if the function is activated.

• Plug on the appliance, it automatically turns on. The temperature will automatically set at 2.
  NOTE: wait at least 2/3 hours before putting food in the appliance, so as to ensure the temperature inside the fridge.

• To change the temperature, press the SET key. When the setting increases, the corresponding LED light will turn on. An acoustic signal is made every time the SET key is pressed and the temperature is changed. After 5 seconds without pressing any key, the setting is confirmed and an acoustic signal is made.
  NOTE: 1 indicates the highest temperature, while 4 indicates the lowest temperature.

• In case of power loss, the last cooling level set is restored.

• To restore the default setting, with the door closed, press the ON/OFF key for 5 seconds.

• Under the normal operating condition (in spring and autumn), it is recommended to set the temperature at 2. In summer when the ambient temperature is high, it is recommended to set temperature at 1-2, so as to guarantee the fridge and freezer temperatures and reduce the refrigerator continuous running time; and in winter when the ambient temperature is low, it is recommended to set temperature at 3-4 to avoid frequent start/stop of the refrigerator.

Fine Tuning
The fine tuning selection mode gives the possibility to set the temperatures by sublevels; each temperature level has four sublevels.

• Press the SET key for 8 seconds, to enter fine tuning selection mode. When the appliance enters the mode, an acoustic signal is made and the LED of currently selected cooling level blinks.
• By short pressing the SET key within 5 seconds, the fine tuning setting increases and, at each pressing, an acoustic signal is made.
• During fine tuning, the LED of the selected cooling level is fixed, while the LED of the selected sublevel blinks.
• If no key is pressed for 5 seconds, the system will automatically exit from fine tuning selection mode. The fine tuning setting is saved and the LED of the selected fridge temperature is fixed.
• If the fine tuning is activated again, the setting will be starting from the previously stored level.

Super Cool function
It is suggested to switch on the Super Cool function if a large quantity of food should be stored (for example after the purchase). The Super-Cool function accelerates the cooling of fresh food and protects the goods already stored from undesirable warming. The temperature is automatically set at the minimum temperature for the fridge compartment.
How to use the Super Cool function:

• The function can be activated by pressing many times the SET key until the Super Cool LED is turned ON.
• To exit the Super Cool function, press the SET key again.
• The Super Cool function automatically ends after 24 hours running.
• When the Super Cool ends, the icon of the control panel is switched off and the previously set cooling level will be restored.

Eco mode
The Eco mode can be activated to optimize the performance of the appliance, whereas obtaining the best food storage, by setting the best combination of fridge and freezer temperatures.
How to activate the Eco mode:

• The function can be activated by pressing many times the Mode key until the Eco mode LED is turned ON.
• To exit the Eco mode, press the Mode key again.
• To exit the Eco mode, press the Mode key again; the previous temperature setting will be restored. The Eco mode automatically ends when another function is chosen from the control panel.

Defrosting
When the layer of frost present in the freezer compartment exceeds 3mm, it is recommended to proceed with the defrosting as it increases energy consumption.

• Switch off the appliance and disconnect the power cord.
• Remove the frozen food and temporarily place them in a cool place.
• Leave the freezer door open and collect the water on the bottom of the product
• When defrosting is completed, dry the interior thoroughly
• Reconnect the power cord and set the desired values.
• Wait a moment and reintroduce the frozen foods.

Demo mode
To enter or exit the demo mode, with the door open, long press the ON/OFF key and simultaneously quick press the SET key 5 times (within 5 seconds).

APP CONNECTION (Content only) IN APP PAIRING PROCEDURE

Step 1

• Download the hOn app on the stores
  
  
  

Step 2

• Create your account on the hOn App or log in if you already have an account
  

Step 3

• Follow pairing instructions in the hOn App

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>