Transwan USB2.0 Optical Extender Ultimate Fiber User Manual
- June 12, 2024
- Transwan
Table of Contents
Transwan USB2.0 Optical Extender Ultimate Fiber
Product Information
- Product Name: USB2.0 Optical Extender
- Model Number: USBEXTEND-8
- Compatibility: USB2.0/USB1.1
- Transfer Rate: High-Speed 480Mbps
- Distance: Up to 6KM
- Number of Ports: 4 USB2.0 ports on the receiver
- Operating System Support: Win7/10, Mac, Linux
- Compliance: CE, FCC, RoHS, WEEE
Product Usage Instructions
- Connect the USB2.0 Optical Transmitter (TX, local unit) to your host computer using the USB Input Cable.
- Connect the USB2.0 Optical Receiver (RX, remote unit) to your desired output devices using the USB outputs.
- If necessary, connect the Transmitter to a DC 5V/1A power adapter using the optional Power Input Port. Note that the power adapter is not included in the package.
- Connect the Receiver to a DC 5V/2A power adapter using the provided Power Input Port.
- Ensure that the Transmitter and Receiver are connected via an optical cable with SC connectors.
- Power on the Transmitter and Receiver units.
- The Power LED indicators on both units should light up, indicating that they are powered on.
- The Optical Connection LED indicators on both units should light up, indicating that the optical connection is established.
- The USB Connection LED indicators on both units should light up, indicating that the USB connection is established.
- Your USB devices are now extended and ready for use.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting operating or adjusting this product. Please keep this manual for future reference.
Package Contents
| Name | Qty |
|---|---|
| USB2.0 Optical Transmitter (TX, local unit) | 1 PC |
| USB2.0 Optical Receiver (RX, remote unit) | 1 PC |
| USB Input Cable (1.5m, black, M/M) | 1 PC |
| Power Adapter 5V/2A (for receiver) | 1 PC |
| User Manual | 1 PC |
Compliance
This product is compliant with below standards
| Standards | Versions |
|---|---|
| USB | 2.0 |
| CE | √ |
| FCC | √ |
| RoHS | √ |
| WEEE | √ |
Introduction
The USB2.0 Optical Transceiver allows you to transfer USB2.0 data through a single mode optical cable. Max. distance is up to 6KM and the transfer rate is up to High-Speed 480Mbps. It is backward compatible with older version.
Features
- Using a single mode (SM) optical cable to extend USB2.0 signal to 6KM;
- High-Speed 480Mbps;
- 4 USB2.0 ports on receiver;
- Backward compatible with older version;
- Support OS: Win7/10, Mac, Linux
Specifications
| Function | Description |
|---|
Connectors
| Transmitter | USB Input | USB Type A (F) x1, black |
|---|---|---|
| Optical Connector | SC x1 | |
| Power Input | *Optional Power Input DC Jack (black), 5V/1A |
*Power adapter is not a must for Transmitter
Receiver| USB Outputs| USB Type A (F) x4, black
Optical Connector| SC x1
Power Input| DC Jack (black), 5V/2A
|
Technical Data
| USB Standards | USB2.0 High-Speed 480Mbps |
|---|---|
| Max. Distance | 6KM by optical cable (SM) |
| Compatibility | USB2.0 or 1.1 devices |
| USB Input Cable | 1.5m Type A, M/M, black |
Operating System
| OS Supports | Win7/10, Mac, Linux |
|---|
LEDs
Transmitter| Power LED x1, Optical Connection LED x1, USB
Input LED x1
---|---
Receiver| Power LED x1, Optical Connection LED x1, USB
Outputs LED x1
Environmental
| Operating Temp. | 0 – 40°C |
|---|---|
| Humidity | 5-85% RH, Non-Condensing |
Physical Properties
| Housing | Aluminum |
|---|---|
| Weight | TX 150g, RX 150g |
| Dimension (L x W x H) | TX/RX: 103x97x29 mm |
| Power Adapters | Input: AC 100 – 240V 50/60Hz; Output: DC 5V/2A |
Components
Transmitter (TX, local unit) Panel
| Name | Function Description |
|---|---|
| USB Input | Connects with a host computer, Type A, female. |
| ⊙ | USB Connection LED indicator |
| FIBER | Connects with Receiver’s optical port (SC, SM) |
| ⊙ | Optical Connection LED indicator |
| DC 5V | Optional Power Input Port to connect with a DC 5V/1A adapter, this |
adapter is not a must, the transmitter will take power from the Input USB Cable.
- This power adapter is not included in the package.
⊙| Power LED indicator
Receiver (RX, remote unit) Panel
| Name | Function Description |
|---|---|
| FIBER | Connects with Transmitter’s optical port (SC, SM) |
| ⊙ | Optical Connection LED indicator |
| DC 5V | Connects with a DC 5V/2A power adapter |
*Only the Receiver requires a power adapter, and it is included in the package.
⊙| Power LED indicator
USB OUT| Four USB2.0 Type A outputs, female.
⊙| USB Connection LED indicator
Installation Diagram
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>