living Co White 1 Drawer Desk Instructions
- June 12, 2024
- LIVING CO
Table of Contents
living Co White 1 Drawer Desk
Product Information
| Assembly Details | Job no. |
|---|---|
| Approximate Assembly Time | 40Min |
| Required Assembly Space | Floor Area 3m x 2m |
| Tools Required | 1 |
After Sales Support
For any support or inquiries, please contact us at
support@compacfurniture.co.nz or call
0800 100 858.
Tips before you start
- For the protection of your furniture, we recommend that the product is placed on a protected surface during assembly to prevent damage.
- Please check that all parts are present before you start the assembly of your furniture.
- For ease and speed of assembly, we recommend that you identify all the parts required for each step before commencing with assembly.
- For larger items, please ensure that you have sufficient space (as indicated on page 1).
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily.
- During Assembly please take care not to over-tighten hardware as this may damage the product.
- Always place the product on a steady and stable surface.
- Do not use the product as a stepladder.
- This product is intended for indoor, household use only as it is a non-industrial product.
Care and Maintenance
- Please periodically check all things and re-tighten as necessary.
- To clean your item, please use a damp cloth and wipe clean.
- Never allow any kind of liquid on your furniture.
- Please do not place hot items (e.g. hot drinks) directly on to the surface.
Parts List
| QTY | PART | MEASUREMENTS | NOTES |
|---|---|---|---|
| 1 | Top | 1000 x 480 x 15mm | Laminate on one side. |
| 1 | LH End | 720 x 396 x 15mm | Laminate on both sides. |
| 1 | RH End | 720 x 396 x 15mm | Laminate on both sides. |
| 1 | Modesty | 390 x 958 x 15mm | Laminate on both sides. |
Hardware List
| QTY | Hardware |
|---|---|
| 8 | Connecting Bolts |
| 8 | Large Cams (15mm) |
| 4 | Dowels |
| 4 | Nail on Glides |
| 8 | Stick-on Cam Covers |
Cam Installation & Operation Guide
The Cam and Connecting Bolt system is used to put your unit together. Below is
an explanation of how this system works.
Assembly Instructions
-
STEP 1: Top
Attach the Top using 5 Connecting Bolts. -
STEP 2: LH End
Attach the LH End using 1 Connecting Bolt, 1 Large Cam, and 2 Dowels. -
STEP 3: RH End
Attach the RH End using 1 Connecting Bolt, 1 Large Cam, 1 Dowel, and 1 Cam Dowel. -
STEP 4: Modesty
Attach the Modesty using 2 Cams and 3 Connecting Bolts. -
STEP 5: Attach the RH End
Follow the instructions provided in STEP 3 to attach the RH End of the desk. -
STEP 6: Attach the Modesty
Follow the instructions provided in STEP 4 to attach the Modesty of the desk. -
STEP 7: Attach the LH End
Follow the instructions provided in STEP 2 to attach the LH End of the desk. -
STEP 8: Attach Nail on Glides
Attach the Nail on Glides to the bottom of the desk. -
STEP 9: Cover Caps
Put the finishing touch on your Tkiwira desk by using the stickers provided to cover the cams.
Warranty
We pride ourselves on producing a range of quality products that are both
packed with features and come with a warranty. For warranty information,
please refer to the warranty documentation provided with your purchase.
After Sales Support
For any support or inquiries, please contact us at
support@compacfurniture.co.nz or call
0800 100 858.
Assembly Details
Tips before you start
- For the protection of your furniture, we recommend that the product is placed on a protected surface during assembly to prevent damage
- Please check that all parts are present before you start the assembly of your furniture
- For ease and speed of assembly, we recommend that you identify all the parts required for each step before commencing with assembly
- For larger items, please ensure that you have sufficient space (as indicated on page 1)
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily
- During Assembly please take care not to over-tighten hardware as this may damage the product
- Always place the product on a steady and stable surface
- Do not use the product as a stepladder
- This product is intended for indoor, household use only as it is a non-industrial product
Care and Maintenance
- Please periodically check all things and re-tighten as necessary
- To clean your item, please use a damp cloth and wipe clean
- Never allow any kind of liquid on your furniture
- Please do not place hot items (eg. Hot drinks) directly on to the surface
Parts List
| QTY | PART | MEASUREMENTS | NOTES |
|---|---|---|---|
| 1 | Top | 1000 x 480 x 15mm | Laminate on one side. |
| 1 | LH End | 720 x 396 x 15mm | Laminate on both sides. |
| 1 | RH End | 720 x 396 x 15mm | Laminate on both sides. |
| 1 | Modesty | 390 x 958 x 15mm | Laminate on both sides |
Hardware List
Cam Installation & Operation Guide
The Cam and Connecting Bolt system is used to put your unit together. Below is an explanation of how this system works.
Assembly
STEP 1: Top
- To begin assembly, lay the top finished side down on a clean and clear surface
- Screw four Connecting Bolts into the holes as shown
STEP 2: LH End
- Insert two Large Cams as shown (make sure the arrow on the top of the Cam points towards the top edge of the End).
- Push two Dowels into the top edge of the End
- Screw two Connecting Bolts into the holes as shown
STEP 3: RH End
- Repeat the previous steps to install the hardware in the RH End.
STEP 4: Modesty
- Install 4 Large Cams into the Modesty as shown below (ensure the arrow on the top of the Cam points towards the edge.
STEP 5: Attach the RH End
- Attach the RH End by fitting the Connecting Bolts with the corresponding pre-drilled holes as shown below.
- Lock the pieces together by turning the Cams ¼ – ½ of a turn in a clockwise direction.
STEP 6: Attach the Modesty
- Attach the Modesty by fitting the Connecting Bolts with the corresponding pre-drilled holes as shown below.
- Once again, lock the pieces together by turning the Cams ¼ – ½ of a turn in a clockwise direction.
STEP 7: Attach the LH End
- Attach the LH End by fitting the Connecting Bolts with the corresponding pre-drilled holes as shown below.
- Lock the pieces together by turning the Cams ¼ – ½ of a turn in a clockwise direction.
STEP 8: Attach Nail on Glides
- Tap the four Nail on Glides into the bottom of the Ends as indicated below. Space them about 50mm in from the front and back edges.
STEP 9: Cover Caps
Put the finishing touch on your Tākiwira desk by using the stickers
provided to cover the cams.
WARRANTY
- We pride ourselves on producing a range of quality products that are both packed with features and completely reliable.
- We are so confident in our products, we back them up with a five-year warranty. Now you too can relax knowing that you are covered.
- For parts and assistance, call the manufacturer direct on 0800 100 858. Please do not call the store you purchased the cabinet from as they will be unable to help you.
- This product is covered by five-year warranty when accompanied by proof of purchase.
AFTER SALES SUPPORT
support@compacfurniture.co.nz or 0800
100 858.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>