moon HELIX SENSE 300 Rear Light Instruction Manual
- June 12, 2024
- MOON
Table of Contents
moon HELIX SENSE 300 Rear Light
The light is locked for shipment, refer to OPERATION instruction to unlock. Read this manual carefully before using and keep for future reference. Visit www.moon-sport.com for manual updates.
CONTENTS
MOUNTING
SEATPOST MOUNTING
SADDLE RAIL MOUNTING
BELT CHIP MOUNTING
WARNING
- Understand country lighting laws and regulations before use.
- Do not shine light directly into eyes.
- Do not mount near wireless computer.
- Do not blind the oncoming vehicles. Always adjust the angle downward.
- Do not submerge the light into water.
- Keep light in cool and dry place when storing.
WARRANTY
MOON lights are covered by a ONE YEAR LIMITED WARRANTY while MOON batteries are covered by 120 days warranty from the date of purchase. This warranty covers the defects in material and workmanship only with proof of purchase. Please contact original dealer for warranty service. For lights bought on MOON website, please contact [email protected] for help.
ONLINE WARRANTY REGISTRATION
Visit www.moon-sport.com for online warranty
registration.
OPERATION
- ON / OFF Press 1s
- MODE SELECT: Click
- STEADY / FLASH: Double Click
- SENSE MODE
1. Power off
2. Press 3s:LOCK/ UNLOCK:
- Power off
- Press 1 6s: Locked / Unlocked FLASH 2 TIMES
- Lock and prevent the light turned on accidentally.
VARIABLE LUMEN SYSTEM
- Select the desired mode.
- Press and hold 35 to set lumen.
- Release when the desired lumen is reached.
- Light flashes twice when either the MAX or MIN lumen level is reached.
RESTORE DEFAULT MODE:
- Power off
- PRESS 106: FLASH 3 TIMES
MODE MEMORY
- The light resumes the previous mode upon next usage.
AUTO SAFE MODE
Quick Flash
- When the battery gets low, the light automatically enters the safe mode that reduces the light output and extend 1.5 hours runtime.
- When the light is in the safe mode, all other functions will be temporarily deactivated
CHARGING
- Power off /
- Plug USB-C cable into USB-C port /
- Unplug after fully charged
- Do not charge over 5V.
- Keep away from flammable objects while charging.
INDICATOR
SENSE OPERATION
BRIGHTNESS SENSING
The built-in light sensor automatically switches between the NIGHT or DAY time
mode.
MOTION SENSING
- Braking Automatically turns brighter or steady lumen when braking,
- Parking When no motion is detected.
RUNTIME
- The stated runtime of each mode includes the BRAKE SIGNAL is enabled 60 times/hour.
- It depends on how many time the BRAKE SIGNAL is used, the actual runtime may vary.
