moon Rigel Rechargeable Front Light User Manual

June 10, 2024
MOON

moon Rigel Rechargeable Front Light

moon-Rigel-Rechargeable-Front-Light-product-image

Product Information

The Moon-Rigel is a bicycle light that features intelligent brightness and motion-sensing functions, as well as a variable lumen system. It also has an anti-dazzling lens, overheat protection, and can be charged via USB. Optional accessories include a helmet mount, remote control, GoPro mount adapter, and handlebar bracket.

Product Usage

Before using the Moon-Rigel, read the user manual carefully to avoid unnecessary damage and ensure that you get the best experience. Keep the manual for future reference.

Operation

The power button is used to turn the light on and off, select modes, and lock and unlock the light. The mode indicator shows the selected mode and whether the light is in standby mode.

Intelligent Operation

The intelligent brightness function automatically turns the light off during the daytime and on at night or in dark areas. The motion-sensing function puts the light in standby mode when no action is detected.

Variable Lumen System

The variable lumen system allows you to select a desired mode and adjust the lumen levels by pressing and holding the power button until you reach your desired level. The light will flash twice when you reach the maximum or minimum lumen level.

Default/Normal Runtime

The runtime for different modes is listed in the user manual.

Rotatable Anti-Dazzling Lens

The Moon-Rigel features a rotatable anti-dazzling lens that can be adjusted to prevent dazzling other road users.

Handlebar Mounting

The handlebar mount can be wrapped around the handlebar and twisted to secure it in place. Make sure to use overheat protection to ensure that the light does not overheat during use.

Charging

To charge the Moon-Rigel, power it off and plug the USB cable into the USB port. Unplug it after it is fully charged. Do not charge it over 5V and keep it away from flammable objects while charging.
For any questions or comments about the Moon-Rigel, contact the customer line at +44 (0)203 5144411.

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

The light is locked for shipment, refer to OPERATION instruction to unlock. Read this manual carefully before using and keep for future reference. Visit www.moon-sport.com for manual updates.

CONTENTS

moon-Rigel-Rechargeable-Front-Light-1

Optional accessories:

  • RB-41 (HELMET MOUNT)
  • USB-C-RMS (REMOTE CONTROL)

OPERATION

moon-Rigel-Rechargeable-Front-Light-2

  • ON / OFF : Press 1s
  • MODE SELECT : Click
  • STEADY / FLASH : Double Click

INTELLIGENT :

  • Power off
  • Press 3s:

LOCK / UNLOCK :

  • Power off

  • Press 6s:

  • Lock system: Lock the light to prevent accidentally turned on.

  • Mode memory: The light resumes previous mode upon next usage.

INTELLIGENT OPERATION

moon-Rigel-Rechargeable-Front-Light-6

INTELLIGENT BRIGHTNESS FUNCTION
Automatically turns to Stand By Mode (OFF) during daytime, and turns to selected mode at night or in dark area.

moon-Rigel-Rechargeable-Front-Light-7

INTELLIGENT MOTION SENSING FUNCTION
Parking
Automatically turns to standby mode when no action is detected.

moon-Rigel-Rechargeable-Front-Light-8

  • At day time, the indicator will change to steady in the stand by mode. (The lumen will not go down to 10 lm)
  • Max standby time: 350hrs

VARIABLE LUMEN SYSTEM

  1. Select desired mode.
  2. Press and hold to set lumen.
  3. Release when reaching desired lumen.

Light flashes twice when reaching the MAX or MIN lumen level.
Restore default mode:

  1. Power off
  2. Press

RUNTIME

moon-Rigel-Rechargeable-Front-Light-11

ROTATAVKE ANTI-DAZZLING LENS

moon-Rigel-Rechargeable-Front-Light-12

HANDLEBAR MOUNTING

moon-Rigel-Rechargeable-Front-Light-13

moon-Rigel-Rechargeable-Front-Light-14

OVERHAT PROTECTION

The overheat protection device cand be ensure the bicycle light in a good running temperature condition, so that to protect the LEDs without burning case. If the light is in high temperature during operation, it will dim the light output.

CHARGING

  1. Power off
  2. Plug USB cable to USB port
  3. Unplug after fully charged.
  • Do not charge over 5V
  • Keep away from flammable objects while charging

moon-Rigel-Rechargeable-Front-Light-15

BATTERY CAPACITY AND CHARGING INDICATOR

  • Battery indicator
    moon-Rigel-Rechargeable-Front-Light-16

  • Charging indicator

  • Charged indicator

WARNING
Understand county lighting laws and regulations before use.
Do not shine light into eyes.
Do not mount near wireless computer.
Do not blind the oncoming vehicles. Always adjust the angle downward. Do not submerge the light into wate.
Keep light in cool and dry place when storing.
Fully recharged the light at least ever 3 months during storage.

WARRANTY CONDITIONS

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals