moon E-Power 1000 LED Bike Headlight Instruction Manual

June 12, 2024
MOON

moon E-Power 1000 LED Bike Headlight

Read this manual carefully before using. Visit www.moon-sport.com for manual updates.

CONTENTS

moon-E-Power-1000-LED-Bike-Headlight-fig-1

Optional accessories:

  • BS-S4 (EXTERNAL BATTERY PACK)
  • BS-S6 (EXTERNAL BATTERY PACK) EXC (Extension Cable)

INTELLIGENT OPERATION

Intelligent Brightness Function is set automatically to Standby Mode during daytime, and turned to selected mode at night or in dark areamoon-E-Power-1000-LED-Bike-Headlight-fig-2

  • The intelligent mode cannot be turned off.

MODE

moon-E-Power-1000-LED-Bike-Headlight-fig-3

INSTALLATION

HANDLEBAR MOUNTING

moon-E-Power-1000-LED-Bike-Headlight-fig-4

CABLE CONNECTION

moon-E-Power-1000-LED-Bike-Headlight-fig-5

CONNECTION

STEP 1

SIGNAL RECOGNITION
It will automatically check & recognize the source of power after plugged in the cable.

STEP 2

SUCCESSFUL CONNECTION
For a successful connection, the blue indicator stays on. The LED light will gradually brighten, and a single flash indicates completion of the power setting.

Motor’s Voltage: DC 6V – 12Vmoon-E-Power-1000-LED-Bike-Headlight-
fig-8

UNSUCCESSFUL CONNECTION
If the voltage is lower than 5V or higher than 14V, the red light will stay on. The operation will be non-responsive. Troubleshoot will be required.

RE-CONNECTION IS REQUIRED

Redo STEP 1 & STEP 2.

  1. When the power source switched.
  2. When the over-current protection occurred.
  3. When the voltage is lower than 5V or higher than 14V

STEP 3
MANUAL OPERATION

  • ON :Press
  • OFF : Press & HOLD Is
  • MODE SELECT: Click 

RESTORE FACTORY’S SETTING

To reset, press & hold the power button and then plug in the power. Wait for 2 seconds until flashes twice as a prompt, restoring the factory setting.moon-E-Power-1000-LED-Bike-Headlight-fig-12

OVERHEAT PROTECTION

The overheat protection system ensures the bicycle light in a good running temperature condition, so that to protect the LEDs without burning case. If the light is in high temperature during operation, it will dim the light output.

WARNING

  • CAUTION HOT SURFACE. This light generate heat while using, so we recommend wear cycling gloves when touch it.
  • Understand country lighting laws and regulations before use.
  • Do not shine light directly into eyes.
  • Do not mount near wireless computer.
  • Do not blind the oncoming vehicles. Always adjust the angle downward.
  • Do not submerge the light into water.
  • Keep light in cool and dry place when storing.
  • If your light does not function properly or work at all, please replace the light immediately.

WARRANTY

MOON lights are covered by a 2 YEAR LIMITED WARRANTY. This warranty covers the defects in material and workmanship only with proof of purchase. Please contact original dealer for warranty service. For lights bought on MOON website, please contact cs@moon-sport.com for help.

ONLINE WARRANTY REGISTRATION
Visit www.moon-sport.com for online warranty registration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals