Caware 14ECO Eco-Friendly Quick Connect Filter Cartridge User Manual
- June 12, 2024
- Caware
Table of Contents
Caware 14ECO Eco-Friendly Quick Connect Filter Cartridge
Product description
- 14ECO was created with one purpose: environmentally-friendly clean & safe drinking water.
- 14ECO can lower replacement costs since the filter housing is reusable.
- 14ECO can be quickly and easily installed for friendly replacement.
Product composition
- Top Cap
- Housing
- Inner Module (PP/ CBC/ MAF)
- Oring (10.77×2.62mm)
- Oring (28.24×2.62mm)
- Oring (17x2mm)
- Oring (60×2.5mm)
- Oring replacement kit
(Oring ❶ ❷ ❸ ❹ each 1)
Only available with replacement
How to install filter cartridge
Step. 1
Push in the filter into the ＊adapter head
Step. 2
Remove the lid.
Step. 3
Rotate “anti-clockwise” until “non-rotatable”
**Ready to use
**
＊adapter head shall be purchased with additional cost.
Visit www.caware.com.tw
How to replace inner replaceable filter element
Step. 1
To disassemble filter cartridge off adapter head. Rotate filter housing
clockwise and downward to remove the filter.
Step. 2
Rotate the top cap anti-clockwise, pull out the used inner module and dispose
it to the trash can. Start to replace inner filter element
Step. 3
Remove 4pcs of Oring ( each ❹ ❺ ❻ ❼ 1) with the same method.
Step. 4
Wash with clean water and clean the filter housing before replacement new
inner module.
Step. 5
Install 4pcs of new Oring with the same method. ( each ❹ ❺ ❻ ❼ 1)
Step. 6
Unpack the new inner module, plug into the top cap, put them back to the
housing and rotate left tight until to the alignment point.
Ready to install
Turn to back page installation to install filter cartridge.
Reminder
The housing is reusable, but for hygienic reasons, if it becomes discolored or
cannot be washed clean, please replace it with a new one.
Suggest to glue some silicone oil on new Oring replacement.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>