KLING FREITAG Spectra 212 Rigging Aid Set User Manual
- June 12, 2024
- Kling Freitag
Table of Contents
KLING FREITAG Spectra 212 Rigging Aid Set
Important Information, Please Read Before Use!
Components
| Item# | Count | Name | Illustration |
|---|---|---|---|
| A | 8 | Washer, 8.4 × 24 mm, black | |
| B | 4 | Allen screw, M6 × 20, with hexagon socket | |
| C | 4 | Compression spring | |
| D | 4 | M6 nut, self-locking | |
| E | 4 | Allen screw, M8 × 35, with hexagon socket | |
| F | 2 | Hinge leaf, with pin | |
| G | 2 | Hinge leaf, without pin | 
H| 8| Plate spring|
I| 4| M8 nut, self-locking|
Required Tools
- Hex wrench, size 5
- SW10 wrench or socket
- SW13 wrench or socket
Installation
Repeat the following steps for each hinge leaf on the K&F SPECTRA 212 transport lid!
Steps 1 – 4
Required items:
| Item# | Count | Name | Tool |
|---|---|---|---|
| B | 4 | Allen screw, M6 × 20, with hexagon | |
| socket | Hex wrench, size 5 | ||
| C | 4 | Compression spring | – |
| D | 4 | M6 nut, self-locking | SW10 wrench or socket |
- Insert the cylinder head screw (b) into the compression spring (c).
- Insert the cylinder head screw (b) with the pressure spring (c) into the bore provided in the Transport Cover.
- Screw the self-locking M6 nut (d) onto the cylinder head screw (b) from below until it is flush with the thread end.
- To check for correct function, push the screw heads fully into the counterbore. Make sure the screws automatically return to their protruding position.
Steps 5 – 6
Required items:
| Item# | Count | Name | Tool |
|---|---|---|---|
| A | 8 | Washer, 8.4 × 24 mm, black | – |
| E | 4 | Allen screw, M8 × 35, with hexagon socket | Hex wrench, size 5 |
| F | 2 | 2 Hinge leaf, with pin | – |
| G | 2 | Hinge leaf, without pin | – |
| H | 8 | Plate spring | – |
| I | 4 | M8 nut, self-locking | SW13 wrench or socket |
-
Assemble the components as shown:
Slide the Allen screw (e) with a washer (a) from below through the bore at the transport-lid bottom. Then, slide on the following components in the given order:
• washer (a)
• hinge leaf as shown (f or g)
• plate spring with the curvature downwards (h, see detailed view)
• plate spring with the curvature upwards (h, see detailed view)
• self-locking M8 nut
Tighten the Allen screw (e) while making sure that you can still screw the hinge leaves (f, g) in and out with ease. -
Check the correct orientation and position of the hinge leaves.
Using the K&F SPECTRA 212 Rigging Aid Set
The hinge leaves of the K&F SPECTRA 212 rigging aid set are easily accessible even with the transport lid mounted.
-
To unscrew the hinge leaves of the K&F SPECTRA 212 rigging aid set, press the locking screw mounted right in front of the selected hinge leaf.
-
Rotate the leaf clockwise by 90° across the locking screw.
-
Make sure the locking screw has moved up from the lid again and locks the hinge leaf.
-
Repeat the previous steps for the remaining three leaves.
For information about installing K&F SPECTRA 212 speaker arrays using the K&F SPECTRA 212 Rigging Aid Set, refer to chapters 6.1.2, (“Horizontal Arrays With Six Speakers” page 16) and 6.2 (“Mounting Vertical Arrays”, page 21) in the K&F SPECTRA 212 Rigging System manual.
Customer Support
KLING & FREITAG GmbH
Wohlenbergstrasse 5
D-30179 Hannover
TEL +49 (0) 511 96 99 70
FAX +49 (0) 511 67 37 94
www.kling-freitag.de
References
- Affordable PDF tools: PDF Merger, Splitter, Password Security, Converter etc. Free download. [A-PDF.com]
- Home - Kling & Freitag Sound Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>