KLING FREITAG GRAVIS 8 Ceiling Bracket User Manual
- June 12, 2024
- Kling Freitag
Table of Contents
- KLING FREITAG GRAVIS 8 Ceiling Bracket
- Product Information
- Product Usage Instructions
- Introduction
- Product Description
- Safety Instructions
- Installation and Usage Instructions
- Dimensions and Weight
- EC Declaration of Conformity
- Accessories
- Care and Maintenance
- Transportation and Storage
- Disposal
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KLING FREITAG GRAVIS 8 Ceiling Bracket
Product Information
Ceiling Bracket GRAVIS 8
The Ceiling Bracket GRAVIS 8 is a quality accessory designed for the GRAVIS
8 speaker system. It is a versatile pro-grade tool that ensures safe
installation and meets all requirements in terms of audio quality.
Intended Use
The Mounting Bracket GRAVIS 8 is solely intended for commercial use and
should only be used with the GRAVIS 8 loudspeaker. It is not suitable for
lifting or securing people or objects other than the specified speaker
systems. The bracket is protected from temporary climatic conditions but is
designed for indoor use only.
Items Included
The following items are included with the Ceiling Bracket GRAVIS 8:
- Mounting Bracket GRAVIS 8
Components
The Ceiling Bracket GRAVIS 8 consists of a single mounting bracket that is
specifically designed for use with the GRAVIS 8 speaker system.
Product Usage Instructions
Safety Instructions
Before using the Ceiling Bracket GRAVIS 8, please read and follow these
safety instructions:
Mounting the Speakers / Wall and Ceiling Installation
Ensure proper mounting of the speakers on walls or ceilings by following
the instructions provided in this user manual. Improper installation may
result in accidents or damage to the speakers.
Admissible Load Capacity
Make sure to adhere to the admissible load capacity specified for the
Mounting Bracket GRAVIS 8. Exceeding the load capacity may lead to instability
and potential hazards.
Installation and Usage Instructions
To install and use the Ceiling Bracket GRAVIS 8, please follow these
instructions:
- Ensure that you have read and understood the safety instructions provided in this user manual.
- Identify the suitable location on the wall or ceiling for mounting the speakers.
- Attach the Mounting Bracket GRAVIS 8 securely to the wall or ceiling using appropriate mounting hardware.
- Place the GRAVIS 8 speaker system onto the Mounting Bracket GRAVIS 8, ensuring a secure fit.
- Adjust the position of the speakers as desired.
- Ensure proper cable management for a neat and organized installation.
Dimensions and Weight
The dimensions and weight of the Ceiling Bracket GRAVIS 8 are not specified
in this user manual. Please refer to the product specifications or contact
KLING & FREITAG for detailed information.
Important Information,
Please Read Before Use!
KLING & FREITAG GmbH Wohlenbergstrasse 5
D-30179 Hannover
TEL +49 (0) 511 96 99 70
FAX +49 (0) 511 67 37 94
www.kling-freitag.de
Introduction
Thank you for purchasing a KLING & FREITAG product. To guarantee trouble-free operation and enable the KLING & FREITAG GRAVIS 8 speaker system to achieve its full potential, please read these user’s manual carefully before use. This item is a quality accessory for the GRAVIS 8 speaker system. Combining it with your existing speaker system creates an extremely versatile pro-grade tool that meets all requirements in terms of audio quality and safe installation.
Icons Used
- This icon indicates a risk of injury or death. Not following these instructions may result in serious health problems including potentially fatal injuries.
- This icon indicates a possibly dangerous situation. Not following these instructions may cause minor injuries or damage.
- This icon marks instructions for proper use of the described products. Not following these instructions may cause malfunctions or damage.
- This icon marks information provided for simplified use of the described products.
About these user’s manual
© KLING & FREITAG GMBH. All rights reserved.
All specifications regarding the features of the described products and
applicable safety guidelines provided in these user’s manual are based on
information available at the time of publishing.
We assume no responsibility for technical specifications, dimensions, weights,
and properties.
All information in these user’s manual is subject to change without notice.
To ensure safe operation, all persons using the speaker accessories must have
access to this guide and all other relevant material during installation. The
speaker accessories must not be set up nor operated unless these user’s manual
has been read, understood and kept readily available on site.
The original language of all KLING & FREITAG user’s manuals is German.
If you need user manuals from KLING & FREITAG, you can order a replacement or
download it from our www.kling-freitag.de.
Contact:
info@kling-freitag.de
KLING & FREITAG GMBH, Wohlenbergstr. 5, D-30179 Hannover
Telefon +49 (0) 511 96 99 70
Telefax +49 (0) 511 67 37 94
Product Description
Intended Use
The Mounting Bracket GRAVIS 8 is solely for commercial use and may only be
used with the loudspeaker GRAVIS 8 in the manner described here.
The Mounting Bracket GRAVIS 8 may not be used to lift and secure people or
objects other than the above-mentioned speaker systems.
The Mounting Bracket GRAVIS 8 is protected from temporary climatic conditions.
For long-term use, however, it is designed to be used indoors only.
When used with the TV spigot 20 mm and the TV hook clamp, the Mounting Bracket
GRAVIS 8 can be mounted on trusses or pipes with a diameter of 30 – 50 mm.
Items Included
- Ceiling Bracket GRAVIS 8 with captive metal clamp lever
- (1x) User’s Manual
Components
- Clamp lever
- Rubber washer
- Swivel arm
- Drill hole Ø 10.5 mm
- Thread M10 to fixate the swivel arm during transport
- Rubber spacer
- Flange mounting
Safety Instructions
Mounting the Speakers / Wall and Ceiling Installation
Suspended loads pose a safety risk.
Only qualified technicians are permitted to perform the installation steps. Be
sure to use personal protective equipment at all times.
The technicians installing the speaker on site are responsible for and
guarantee safe setup and use.
Never use signal cables or power cords for suspending, aligning, or securing
the systems.
Before installing, check the stability, strength, and materials of walls,
ceilings, and boarding. For example, use suitable rawlplugs for wall panels
and make sure the strength is sufficient.
Note that the suspension points on the hall ceiling (i.e. shackles, attachment
points, or chain hoists) must comply with the DGUV regulations 17 and 18 or
similar locally applicable accident-control standards. The maximum load must
have been certified by an authorized expert.
Be sure to tighten all bolts and screws to the specified torque.
Unless otherwise stated, use only KLING & FREITAG original parts for mounting
the speakers. Never use other parts (in particular, parts not made by KLING &
FREITAG).
Make sure all fittings used are suitable for the task at hand and meet all
relevant safety requirements.
Ensure that all connections are secured against coming loose and that only
authorized, statically tested and correctly sized supports, mounting
equipment, wire ropes and chains are used.
Be sure to always visually inspect all safety-related speaker and accessory
components before use. If there are signs of wear, cracks, or deformation,
etc., replace the affected parts immediately. Visual inspection also includes
checking all screwed connections of supporting components.
The information described here does not relieve the user of the duty to follow
the given safety requirements and legal regulations.
Admissible load capacity
The speaker accessory Mounting Bracket GRAVIS 8 may only be loaded with one
speaker model GRAVIS 8.
The speaker accessories may only be mounted horizontally.
Installation and Usage Instructions
-
Place speaker’s flange onto the flange adapter of the speaker mount.
-
Move the swivel arm down so that the M10 thread of the clamp lever is over the speaker’s flying point.
-
Turn the M10 thread of the clamp lever into the thread of the flying point. Before tightening the clamp lever, align the speaker as desired. Tighten the clamp lever!
Dimensions and Weight
EC Declaration of Conformity
according to EC Machinery Directive 2006/42/EG
We:
KLING & FREITAG GmbH Junkersstr.14
30179 Hanover Germany
hereby declare under our own responsibility that the following product(s):
- Type: Mechanical speaker accessory
- Model(s): Ceiling Bracket GRAVIS 8
complies with the requirements of the EC health and safety directives.
The following standards have been applied:
- DIN EN ISO 12 100
- DIN EN 18 800
- BGV C1
Accessories
-
M10 x 17 Eyebolt
-
Pipe Clamp for TV Spigot
-
TV spigot 20 mm
Care and Maintenance
For the owner and user, it is mandatory to be aware that speaker accessories
used to fly or mount the speakers are fundamentally safety-relevant.
Note that the mains cables are delivered with varying connector options or
with open wires (mains side), depending on the country or order number.
The accessory Mounting Bracket GRAVIS 8 can exhibit signs of wear over the
years, i.e. from mechanical strain, transport damage, corrosion, or improper
handling.
As a basic principle, you must visually inspect the speaker accessory Mounting
Bracket GRAVIS 8 before and after you use it. For fixed installations, you
must inspect it for signs of wear at regular intervals.
When performing those checks, particularly look for deformations, cracks,
dents, damage to threads, and corrosion. Also check slings and lifts (e.g.
shackles, chains, and steel ropes) carefully for wear and deformation.
If as a result of these checks any uncertainty should arise with regard to
safety or if specific faults are found, the Mounting Bracket GRAVIS 8 system
may no longer be used and you must send in the product to KLING & FREITAG GmbH
for inspection and repairs, if necessary. If defects are ascertained, then you
must send in the product to KLING & FREITAG GmbH for inspection and repairs,
if necessary.
Inspection regulations may vary depending on application and country of use.
Observe all applicable regulations; when in doubt, contact the local
authorities.
Many countries require regular inspection of mounting components and
accessories. An additional annual inspection is typically required to be
performed by a technical expert. Moreover, a legally certified or official
authority must perform a detailed inspection every four years.
Therefore, be sure to maintain an inspection log. Enter the values determined
for each speaker and accessory during the periodic checks into this log. This
way, relevant data are always at hand in case of inspection. The log should
also document maintenance measures and inspection intervals and contain parts
lists.
Clean this speaker accessory regularly using a corrosion-prevention
penetrating oil (for example, WD-40®).
Transportation and Storage
This speaker accessory is protected against short term moisture. GRAVIS
8Store, transport, and use the accessories in dry environments only. This
speaker accessory is not designed for long-term use in a corrosive
environment.
Make sure that the system is adequately ventilated during longer storage
periods so any residual moisture can escape from the equipment.
Furthermore, you have to ensure that the accessory is protected from
mechanical strain to prevent possible damage. GRAVIS 8
Disposal
Dispose of this product in compliance with your national regulations.
Ensure that after being disposed of that this product cannot be used again or
in any other way.
References
- der Freitag — Die Wochenzeitung für Politik, Wirtschaft und Kultur
- Affordable PDF tools: PDF Merger, Splitter, Password Security, Converter etc. Free download. [A-PDF.com]
- Home - Kling & Freitag Sound Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>