LookOurWay GOBO Logo Projector User Manual
- June 12, 2024
- LookOurWay
Table of Contents
GOBO Logo Projector
User
Manual
WHAT’S IN THE BOX
- GOBO logo Projector
- Custom Printed Lens
- Power Supply W/ XXX long cable
- Mounting Bracket
- Remote Control
NOTES BEFORE USE
| Adjusting Focus
Turn the lens at the front of the projector in and out until the logo is clear
and legible. Turn out (left) for closer distances and in (right) for further
distance.
---|---
| Adjust the Logo to Rotate or Static
There is a switch at the rear of the lamp. Press the switch to rotate or
static.
| Remote control
Remote control can help you to control the logo to rotate or static and to
turn on or off the lamp.
25W SPECIFICATIONS
- Brightness: 2000 lumens
- Lens Range (bright environment) Up to 20 ft
- Lens Range (dark environment) Up to 30ft
- Aspect ratio: 1:0.33 (Image size(m)=0.33*distance(m)
- Projector Dimensions 9″L X 6.5’H
- Base4’LX2’W
- Projector Box Dimensions 12″ X 7″ X 7″
- Power Consumption: 4W
- Projector Weight 3lbs
50W SPECIFICATIONS
- Brightness: 4500 lumens
- Lens Range (bright environment) Up to 30 ft
- Lens Range (dark environment) Up to 50ft
- Aspect ratio: 1:0.33 (Image size(m)=0.33*distance(m)
- Projector Dimensions 9″L X 6.5″H
- Base 4’LX2’W
- Projector Box Dimensions 12″ X 7″ X 7″
- Power Consumption: 4W
- Projector Weight 4lbs
100W SPECIFICATIONS
- Brightness: 9500 lumens
- Lens Range (bright environment) Up to 60 ft
- Lens Range (dark environment) Up to 50ft
- Aspect ratio: 1:0.33 (Image size(m)=0.33*distance(m)
- Projector Dimensions 9.5″L X 8″H
- Base5’LX3’L
- Projector Box Dimensions 14″ X 8″ X 7″
- Power Consumption: 4W
- Projector Weight 6.5lbs
PRODUCT SPECIFICATIONS
- Heavy Duty Aluminum Housing (Available in Silver | Black)
- Water Resistant IP67
- High Power LED Light
- Replaceable GOBO Lens
- Warranty 1-Year
- Adjustable Focus (Manual)
- Remote Control
- Rotating Lenses
- Certifications 1ISO900, CE, ROHS FCC, PSE
- Input Voltage: AC 120/220V – 50Hz-60Hz
- Ambient Operating Temperature -31°F to 140°F
INSTALLATION METHOD
- Drill screw holes in the positions to be installed.
- Put the explosion screw into the punch hole.
- Align the screw hole of the machine base bracket into the threaded end of the explosion screw. The diameter of the wall opening is 10mm.
- Screw the nut into the thread at the end of the explosion screw until it is tightened.
GOBO REPLACEMENT
- Screw out all the screws of the front of the machine.
- Take out the snap ring ad GOBO
- Install new GOBO and snap ring. The GOBO needs the reverse side up.
- Reinstall the front cover of the machine and complete the installation.
www.Iookourway.com
868-586-3888
sales@lookourway.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>