CONNECTGO CG006 Solar Panel Instructions
- June 12, 2024
- CONNECTGO
Table of Contents
CG006 Solar Panel
Instructions
General
- This product is only for use with products in our ConnectGo 31V connectable range.
- All products in this range come with weatherproof, 2 pin connectors, which will connect seamlessly with all items in the 31V system range.
- Check your power rating label for maximum LED quantity and power consumption of this product and do not exceed this maximum.
- Products in the 31V range are manufactured to IP44 standards allowing for indoor and seasonal outdoor use.
Before you start
- Avoid using sharp-edged tools or mounting accessories (e.g. metal wires) to hang or fasten any part of your system.
- This product MUST NOT BE MODIFIED; if any modification is made i.e. cutting, extending lead wires, the warranty will be invalidated and may render the product unsafe.
- The LED bulbs used are designed for long life and are non-replaceable. Do not attempt to repair or replace them.
- Connect your desired ConnectGo light string or accessory to the female connection on the solar panel cable, ensuring correct polarity. Check the rubber ‘o’ ring is secure and tighten the screw cap over the connection.
About the product
This solar panel measures Ticm and features a generous 2m cable. This product will only be compatible with products from our Connect Go 31V range. It will power up to a maximum of 200 LEDs. It also comes complete with rechargeable batteries and 2 different functions, which are listed below. Next to each function, you will find the maximum running time for each setting:
PRODUCT CODE| PRODUCT NAME| MAX. LED LOAD
(string lights)| MAX NO. SET
(festoon Lights)| FUNCTION AND RUNNING TIME
---|---|---|---|---
CG006| Solar Panel| 200 LEDs| 1 SET| 1. On-Steady (up to 6 hours)
2. On-Twinkle (up to 8 hours)
The level of battery charge, and duration of light time depends on the amount of sunlight received, so your lights will stay illuminated for longer during the summer months. Batteries can be replaced. If you need to replace the batteries at any time, please ensure the replacement is the same specification as the original. We recommend charging the product in the sun for about 2-3 days, every 6 months, in order to protect the rechargeable battery.
Fixing
- Before fixing, it is recommended that you test all products and check all connections are secure.
- Check that no wires are damaged and water seals (rubber “o” rings) are in place.
- Carefully position cables to avoid a ‘tripping’ hazard and away from other light sources.
Storage / Contact
- Note: the lifespan of this system is subject to the way in which it is handled. Make sure it is handled carefully during assembly, dismantling and storage.
- Dry thoroughly before storage, as damp can shorten the life.
For any technical information relating to this product, please email Festive
Lights Ltd on contact@festive-lights.com.
We aim to respond within 2 working days. Alternatively, contact our help line
on (01257) 792111.
This service is available between 9.00am – 5.00pm Monday to Friday.
UK importer: Festive Lights Ltd, Preston Road, Charnock Richard, Chorley,
Lancashire, PR7 SHH
EU importer: Festive Lights BV, Utrechtseweg 341, 3818 EL Amersfoort,
Netherlands
