Premier DECORATIONS DC211289 Solar Water Feature Instruction Manual

June 12, 2024
Premier DECORATIONS

Premier-LOGO

Premier DECORATIONS DC211289 Solar Water Feature

Premier-DECORATIONS-DC211289-Solar-Water-Feature-
PRODUCT

Catalogue No. DC211289 Solar Water Feature

  • Manufactured and Imported by: Premier Decorations Ltd.
  • United Kingdom: HA4 0EJ
  • EU : Inniscarra, Co Dublin, D24 EO29

Thank you for purchasing the DC211289 Solar Water Feature. This product provides a solar-powered water feature for enhancing your outdoor experience. Please read the following instructions carefully to ensure satisfactory operation and to be aware of important safety issues.

Assembly Instructions:

  1. Choose a suitable location for your water feature, ensuring it receives adequate sunlight throughout the day.
  2. Connect the pump to the solar panel following the provided instructions.
  3. Fill the water feature with clean water, ensuring the pump is fully submerged.
  4. Connect the supply tubing to the pump outlet and position it in the desired water flow direction.
  5. Securely fix any decorative elements or attachments to the water feature according to your preference.
  6. Turn on the solar panel and allow time for the pump to start circulating the water.

Note : If the water feature does not start working immediately, please refer to the troubleshooting section below.

Troubleshooting:
If the water feature is not working properly, follow these steps:

  1. Ensure that the solar panel is receiving direct sunlight and is properly connected to the pump.
  2. Check if there is any debris or blockage in the supply tubing or pump inlet. Clean if necessary.
  3. Lift the pump from the water and remove the supply tubing at the pump outlet. Clean the tubing inside and out if necessary.
  4. Reset the pump in the water with the outlet side up. Once water begins to flow, reattach the supply tubing.

Safety Information:
Please adhere to the following safety guidelines while using the DC211289 Solar Water Feature:

  1. Keep the water feature and its components out of reach of children and pets.
  2. Do not operate the water feature without proper supervision.
  3. Do not submerge the solar panel in water or expose it to extreme temperatures.
  4. Do not use the water feature if any parts are damaged or defective. Contact the manufacturer for assistance.
  5. Disconnect the water feature from power sources before performing any maintenance or cleaning.

Care & Maintenance Instructions:
To ensure optimal performance and longevity of your DC211289 Solar Water Feature, follow these care instructions:

  1. Regularly clean the pump, supply tubing, and water basin to prevent clogs and maintain water quality.
  2. Remove any leaves, debris, or algae from the water feature as they can affect its operation.
  3. Store the water feature in a dry and protected place during winter or when not in use for an extended period.
  4. Refer to the product warranty for any specific maintenance requirements or recommendations.

Thank you for purchasing this product,
Please spend a few minutes reading these instructions to enhance your experience and to make yourself aware of important safety issues and satisfactory operation.

Solar Water Feature

Premier-DECORATIONS-DC211289-Solar-Water-Feature-FIG-3

Assembly Instructions

  • Remove the water feature from box and position the solar panel in full direct sunlight.
  • Wipe over with a damp cloth to remove any residual dust.
  • Fill water feature with water.
  • Submerge the pump in the water, with central nozzle remaining out of the water.
  • Fix the pump securely to the bottom of the water feature to avoid vibration.
  • Connect the solar panel and the pump securely.
  • ALWAYS make sure there is water in the water feature so that the pump remains submerged.
  • Change the water frequently to avoid dirt affecting the pump.
  • The water feature will only work when the solar panel is placed in direct sunlight. Once the sun goes down the water feature will stop working.

Troubleshooting

  • Check the water level. Adjust the water level to achieve the desired effect and to minimize any splashing. Running the pump without sufficient water can damage the pump. Splashing or leaking can occur if the reservoir is too full.
  • Check the pump discharge and intake for dirt and debris.
  • Check the water feature tubing for kinks and obstructions.
  • Is the pump “air locked”? Plug and unplug the pump several times to clear.
  • If the pump operates, but there is no flow, check to ensure the pump is fully submerged.
  • If the pump operates, but there is no flow, and if the pump is submerged and there are no kinks in the supply tubing, lift the pump from the water. Remove supply tubing at pump outlet and clean tubing inside and out if necessary. Reset pump in water (outlet side up) and once water begins to flow, re-attach the supply tubing.

Safety Information

  • Do not lay the cable where it can be damaged. i.e. gardening activities
  • Ensure the pump is submerged before switching on.
  • Do not pump heated water, heavily chlorinated water or water with high PH level.
  • Do not damage the insulation of cable.
  • Ensure the water feature is positioned on flat, stable, heat resistant surface.
  • Some splashing is inevitable so place your fountain where any splashing will not cause damage.
  • Do not place the pump to a depth exceeding 0.8M.
  • Leaning on, excessive weight or pressure on the fountain may cause it to fall over. Keep pets, children, or anyone from sitting, leaning, or climbing on the item.
  • Retain the instruction for future reference

Care & Maintenance Instructions

  • To get the desired water effect [without excess splashing] you may need to soak parts of the water feature first before turning the unit on.
  • Please clean the water feature with a soft cloth and change the water frequently, as impurities can block the pump and water pipe. Do not use any abrasive substances.
  • Although intended for outdoor use we recommend it is stored inside for winter. Dry it thoroughly and store in a dry place.
  • If the item doesn’t work after trying the above tips, please contact a professional for further advice.

DC211289/JAT/2021/REV1

  • Manufactured and Imported by: Premier Decorations Ltd.
  • United Kingdom : HA4 0EJ
  • EU: Inniscarra, Co Dublin, D24 EO29

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Premier DECORATIONS User Manuals

Related Manuals