TOYOTA 2022 Tundra Without Deck Rail Owner’s Manual
- June 13, 2024
- Toyota
Table of Contents
TOYOTA 2022 Tundra Without Deck Rail
Product Information
The Toyota Tundra 2022+ without Deck Rail is a truck bed accessory designed to enhance the functionality and versatility of your Toyota Tundra. It allows you to securely attach various accessories to your truck bed, such as bed covers, racks, and more. The Side Rail Clamp is a crucial component of the installation process, ensuring a secure and stable attachment of the side rails to the truck bed.
Tools Recommended:
- Clamp
- Tundra Bed Cap & Rail Clamp
NOTE: It is essential to ensure that all areas are clean and free of debris before proceeding with the installation to ensure optimal performance and longevity of the product.
Product Usage Instructions
- Position the driver side rail against the truck’s bed rail.
- Begin clamping the driver side rail to the truck bed. Start in the middle and evenly space three clamps (A) along the rail.
- Leave approximately 8 inches on each end of the rail.
- Finger tighten the clamps, ensuring that the teeth properly engage with the grooves of the side rail.
- Repeat the same process on the passenger side rail.
- NOTE: You may use spring clamps to hold the side rail in place during the installation process for added assistance.
- Refer to the standard owner’s manual for rail adjustments and final clamp tightening.
Part#: 1118761 Rev. A 6-23-22
SIDE RAIL CLAMP INSTALLATION
TOOLS RECOMMENDED
Spring clamps
NOTE: It is important that all areas are clean and free of debris prior to installing.
Position the driver side rail against the truck’s bed rail. Begin clamping the driver side rail to the truck bed. Start in the middle and evenly space 3 clamps (A) along the rail. You should leave approximately 8” on each end of the rail. Finger tighten the clamps, making sure the teeth properly engage with the grooves of the side rail. Repeat on the passenger side rail.
NOTE: The use of spring clamps to hold the side rail in place can assist during the installation process.
Return to the standard owner’s manual for rail adjustments and final clamp tightening.
Part# 1118761 Rev. A 6-23-22