taurus R403 Evaporative Air Cooler User Manual
- June 12, 2024
- taurus
Table of Contents
taurus R403 Evaporative Air Cooler
DESCRIPTION
A ON/OFF REFRESH BUTTON (Use only with water in tank)
B OFF FAN
C ON / FAN SPEED
D SWING FUNCTION
- DISPLAY CONTROL
- OUTLET
- CASTORS
- WATER LEVEL DISPLAY
- UPPER WATERSTORE
- FILTER
- MAIN WATERSTORE
- ICE PACKS x 2
USE AND CARE
- Fully extend the appliance’s power cable before each use.
- Do not use the appliance if its accessories are\ not properly fitted.
- Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
- Do not use the appliance if the on/off switch does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to catch it or move it.
- Do not use the appliance if it is tipped up and do not turn it over.
- Do not turn the appliance over while it is in use or connected to the mains.
- Disconnect the appliance from the mains when not in use and before undertaking any cleaning task.
- Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
- Keep the appliance in a dry, dust-free place, out of direct sunlight.
- Make sure that dust, dirt or other foreign objects do not block the fan grill on the appliance.
- Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
- Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
- Do not use the appliance to dry pets or animals.
- Do not use the appliance to dry textiles of any kind.
INSTALLATION
- Be sure to remove all packaging material from inside the appliance.
- Ensure that the fan is switched off from the supply mains before start any installation or assembly operation.
- Do not remove the support feet or wheels from the appliance.
- Ensure that the appliance is level with respect to the floor.
- Do not cover or obstruct any of the openings of the appliance.
- The plug must be easily accessible so it can be disconnected in an emergency.
- The appliance should be used with its wheels attached.
ASSEMBLING THE WHEELS
- To assemble the wheels, place the appliance face down
- Stand the appliance up again so as to check that the wheels work properly.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products’ packaging has been removed.
- Prepare the appliance according to the function you wish to use:
USE:
- Fill ice boxes with water and put them in the freezer.
- If you wish to use the cool/humidification function, ensure there is sufficient water in the reservoir.
- Fill the tank to the rear with cold water and insert if you want the ice boxes.
- Take into account the indication of the water level. Do no exceed the level MAX.
- Extend the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in the desired direction.
- Turn the appliance on, by using the speed buttons (C)
- Turn the cooler on, by using the cooler button (A)
FAN FUNCTION:
- Select the desired ventilation speed. (C )
OSCILLATION FUNCTION:
- The oscillation function makes it possible to direct the flow from the apparatus so that it automatically alternates over a range of 75º.
- To activate this function, press the (D) switch.
- To deactivate this function, follow the procedure for switching it on in reverse.
REFRESH FUNCTION:
- To activate this function, press the (A) button.
- To deactivate this function, follow the procedure for switching it on in reverse.
- Do not activate this function if there is no water in the tank, or if the water level is below the minimum.
- To cool the air, add the ice packs in the water tanks (5,7)
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Turn the appliance off using the on/off switch (A, B).
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- The cable housing means you can remove and have available the required length of cable for working with the appliance, preventing accident risk situations.
- Empty the water tank.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper part of the body, which facilitates comfortable transportation .
CLEANING
- Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
- Wash the filter in warm water with a mild, soapy solution; use a soft brush if necessary. Rinse with clean water and leave to dry.
- Wash the honeycomb filter with clean water and a soft brush if necessary. Leave to dry.
- Never submerge the appliance in water or any other liquid or place it under running water.
- If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use.
- At the end of the season, store the cleaned and dried appliance in the original packaging if possible. Store it upright in a cool, dry and dust-free place.
WARRANTY AND TECHNICAL ASSISTANCE
This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.
You can find the closest one by accessing the following web link: <http
://taurus-home.com/>
You can also request related information by contacting us.
You can download this instruction manual and its updates at http://taurus- home.com/
Avda. Barcelona, s/n 25790 Oliana Spain
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>