OUWMAN KYMQ-12B Electric Salt and Pepper Grinder Set User Manual

Table of Contents

To ensure safety and maintain the high quality of the product, we recommend that you read and follow the instructions carefully.

Do not immerse the appliance in water or any other liquid to avoid harm to human or the product.
Use for pepper and salt only, please do not use for other purposes.
Do not force the grinder to tighten or twist it, or attempt to speed up the mechanism.
Keep body parts (e.g. finger) and utensils away from the grinding head to avoid damage. Please hold the grinder tightly when using.
Keep this product away from children.
Do not dismantle the product by yourself, otherwise warranty will be invalid.
Please take out the batteries if do not use for a long time.
Keep away from flammable, explosive gas, high temperature.

Hold the grinder tightly, and switch the battery cover to open according to the indication icons.
lnsert4 pieces of AAA alkaline batteries according to the positive and negative terminals. Close the battery cover and rotate to lock.

Hold the grinder tightly, rotate and open the container according to the indication icons.
Put pepper or salt into the container, attach and lock the upper body and container by rotating reversely.
According to the personal needs to rotate the adjuster.
Press and hold the on/off button to grind, release the button to stop.
‘With seasonings in the container, please do not turn the grinder upside down for a longtime in case grains of seasonings might get into the battery compartment and cause battery corrosion.
If the burr gets stuck when adjusting the coarseness, please rotate the adjuster counterclockwise for a few clicks, and then press the function button to start the motor, thus loosen the burr. (Note: This situation is caused by the characteristics of the ceramic grinding burr instead of product quality, and does not affect the normal use of the product.)
‘After grinding, grains stuck at the burr could makes it difficultto rotate the adjuster. Put the adjuster upward and pat the product lightly to shake the grains off the burr, then continue to rotate the adjuster to re-adjust coarseness.
If the adjuster falls off, please assemble the components in the orders shown below.

If the grinder does not work or stops while grinding:

If the above operations are all correct and the grinder still works abnormally, please contact us via Amazon email.

Read User Manual Online (PDF format)

Loading......