SHARPER IMAGE 17025 RC Rocket Drone Instruction Manual

ROCKET
DRONE

Item# 17025

Recommended for ages 14+. Please read and follow this instruction manual.
Do not give this vehicle to a child under 14 years of age. Adult supervision Required.

CAUTIONS:

Safety Information

1. Tis product s a high precision device and integrates mecharics, lectronics, ‘a6ro-mochanics and H lransmitelc.. and only accurate assembly and debugging Can avoid any possible accident. The owner of the device Should Sperate n a safe
   way and any personal injury or property Ioss Gaused by inappropriale operation Shaifbo boyond of our esponsiites. bocausa e wil ot coniol,asseme and operate the devic

2. This product s applicabl o the popuiation ovr 14 years o, with catain ogel operation exporience:

3. The airdrome shouid be iocaly legal for model operation.

4. We wil ol take any responsibity related o safety n terns of operation, use and conirol upon the sale o the pr

5. Please contactthe ocal specfied distibutor enrusted by us for any problem to operaton and maintenance.

Cautions

The drone is a high-risk product, please keep it away from the crowd while playing.lt might cause damage of the drone or personal injury by improper assembly, poor control or unfamiliar operation, please be cautious.

1.  Keep away from obstacles and the crowd. The drone has uncertain flying speed and various states, which bring about potential danger. Keep away from the crowd, high building and high-voltage wire etc., and avoid severe weather to ensure the safety of the operator, surrounding crowd and property.
2. Keep away from humid conditions. The drone consists of many precise electronic components and mechanical elements which should be kept away from humid conditions or water in case of malfunction.
3. Safe operation. Pay attention to the operator’s state and operation skill, and avoid fatigue operation with lassitude or improper operation which would bring about possible danger.
4. Keep away from the parts of high-speed revolution. The operator, surrounding crowd and any objects should keep away from the components of high-speed revolution in case of danger or damage.
5. Keep away from heat source. The drone is made of metal, fiber, plastic and electronic elements etc., which should be kept away from heat in case of deformation or damage due to high temperature. This product is using Li-Po battery Li-Po battery differs from the common batteries, which contains the chemical materials by means of thin tinfoil. This design can reduce the weight of the battery but also make it more brittle to rough or improper operation. Like other batteries, any incorrect operation would cause fire or explosion.
   -Do not charge the battery when putting it inside the drone, which might cause fire and damage.
   -Please keep the drone with 50% power if you do not play it for a long time, to extend the battery life. In that case, charging for the next time needs only half time for a full charging.
   -Please use the original charger
   . -Do not charge the battery on the carpet to avoid fire.
   -Please recharge the Li-po battery if it is stored more than 3 months for the sake of normal lifetime.

CONTENTS

REMOTE CONTROL:

BATTERY CHARGE AND INSTALLATION

•  Connect one end of the USB charging cable to the adapter power port, and then connect the other port to the battery charging port. When charging correctly, the USB charging cable indicator is always on.

• The USB charging line indicator is off, indicating that the charging is complete (the charging time is about 50 minutes)

• Install the drone battery module in the direction shown in the figures to the drone battery holder.(Figure 1)

• The battery module finished in stallation.(Figure 2)
  

•  Click the button on the battery cover with a screwdriver to take out the battery cover. (Picture 1)

• Install 3×1.5V AA batteries into the battery compartment according to their polarity (Picture 2)

• Put on the battery cover (Picture 3) Note: Batteries should be inserted with the correct polarity.
  (3×1.5V AA BATTERIES NOT INCLUDED)

PREPARING TO FLY:

With the battery charged and in place, place the Rocket Drone flat in a horizontal plane. Long press the drone’s power switch. Once the light flashes, the drone is in standby mode.
NOTE: The back of the drone should be facing the operator.

Press the remote control’s power button. The remote’s lights will flash. Push the left joystick up to the highest point, then aim the joystick down to the lowest point. The drone’s lights will stop flashing and remain on. This should pair the remote with the drone. To calibrate the the drone, hold the left and right joystick at a 45 angle. The drone’s lights will blink and the remote will make a “beep” sound This should complete horizontal calibration.

TURN ON YOUR DRONE AND BLASTOFF:

Manual Liftoff: Once the drone and remote control are synced, you can manually take off by slowly pushing the left joystick upwards. This will start your propellers. Then accelarate your upward movement again to accelarate rotation and take off.

Auto Takeoff: Once the drone and remote control are synced, you can press the “one button take-off” on the remote control, and the drone will automatically start flight. After the propellers slowly rotate, it will automatically rise about 4ft and hover.
SPEED CHANGE
Press the left joystick down to adjust the speed of forward, backward, left and right side and steering; the speed is divided into three gears, the default is one gear, press “se” two sounds for the second gear, then press sc,se , The three-tone is the third gear, and when you press the se , it returns to the first gear.

ADVANCED CONTROLS:

1. 360°STUNT FLIP FUNCTION
   When you are familiar with the basic actions. you can proceed to explore even more exciting stunt actions. Fly the drone to a height of above 3 m above the ground, press the button (Stunt Flip Button) on the remote control and then push the right joystick to the farthest position of Front/BackfLefVRIght. the drone will now execute the FronUBack/ Left/ Right stunt flip function.
   NOTE: Thi stunt works best when the battery is fully charged. If the battery is low, this function won’t work.
   

2. HEADLESS MODE:
   Begin flight. Once the drone is airbom, press the °headless mode* button. The remote will beep and the lights on the drone will flash at the same time. The drone will now be in hover mode. To exit this mode, just press the joystic _ in any direction to retake control.
   NOTE: Once you change the Erection of flight, make sure to check the direction the drone is facing as it vAll need to be corrected.
   

3. OBSTACLE AVOIDANCE MODE
   Begin flight. Once the drone is airborn, press “Obstacle Avoidance’ This will turn on the drones sensors on and when drone approches a wall or obstacle. it will fly back and avoid it. In this mode. the drone can only Ity in 1st gear. The fast gear cannot be turned on. This mode is recommended when flying indoors. To exit obstacle avoidance mode. just long press the button.

4.  INFRARED INDUCTION JET MODE
   You can use your hand to control the Rocket Drone using this induction mode. For this mode start on the ground. Turn on the drone sp the lights flash. The press the remote control power button twice fast. The lights will flash quicldy as they complete calibartion. Grab the Rocket and throw about 3 feet up in the air. The drone will begin to fly and spin around induction obstacles. It will also recognixe obstacles below the drone.
   To exit this mode, press the left joystick up then down to pair the frequency. Once connection is succesful, wait for the drone light to turn on. Now you can use the remote control to fly normal and control the drones actions.

NOTE: In case of an emergency, grab the middle of the ricket with your hand, and turn the drone upside down. The drone will immediately stop working.
WARNING: For safety reasons, when flying indoors, do not stand under the flying drone.

FLIGHT CONTROLS:

FINE TUNE YOUR DRONE:

Forward/Backward

If the drone keeps flying forward or backwards on its own. tune in your directional calibration by pressing the ‘Fine Tunning: button up or down.
Sideward fly fine-tuning

If the drone keeps flying towards the left or right on its own, tune in your directional calibrabon by pressing the Tine Tunning: button right or left

©2023 Jupiter Creations, Inc. All rights reserved
www.jupitercreations.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>