momit BEVEL Smart Thermostats Starter Kit User Guide
- June 12, 2024
- momit
Table of Contents
momit BEVEL Smart Thermostats Starter Kit
Product Information
The BEVEL Starter Kit is a smart thermostat that allows you to control your heating and cooling system through the Bevel App. It features a unique design with two main parts – a base unit that is mounted on the wall and a detachable display unit that can be moved anywhere in the home. The thermostat offers various features such as app control, savings, easy installation, portable usage, My Budget function, heating and cooling control, internet connection, wireless connectivity, schedule, geofencing, temperature and humidity monitoring, weather forecast, and statistics. The kit also includes a gateway that connects the Bevel thermostat to the internet.
- With its unique design, momit Bevel leads the next generation of smart thermostats to control your heating & cooling system through Bevel App.
- Due to its integrated design there’s no need of any additional device. It has two main parts, a base unit that is mounted on the wall and a detachable display unit that can be moved anywhere in the home.
- Perfect for system zoning to control the room temperature independently.
- Its 360º screen turns around automatically to show all the information, so it can be placed in any position.
- You can use the My Budget function to set targets for how much you want to spend on heating each month. momit will alert you as you near the target.
- You can also check how much energy you’re using right now, and see what you’re likely to spend in the future. This could help you reduce the amount of energy you use, and more importantly lower your bills.
Product Usage Instructions
- Ensure you have an internet connection before performing the device configuration.
- Download the Bevel App from Google Play or App Store.
- Assign a name to your home and define its location in the Bevel App.
- Register your Gateway in the Bevel App by scanning the QR code on the back of the device.
- Install the Gateway by connecting it to the power source using the micro USB cable and power adapter, as well as connecting it to the router using the Ethernet cable.
- Wait for all three LEDs on the Gateway to be on and steady, indicating successful installation.
- Separate the thermostat (A) and base (B) of the device.
- Remove the base cover (B) by pressing both tabs.
- Register the base (B) by scanning the QR code on the device.
- Register the thermostat (A) by scanning the QR code on the back of the device.
- Remove the battery cover (A) of the thermostat and remove the safety tab. The Internet Connection icon will appear on the screen when the internet is connected.
- The Bevel App will confirm successful connection of the devices. Repeat the registration steps if needed.
- If there is an existing thermostat installed, cut off the electrical supply to the installation area and remove the front panel. Label the wires with the supplied stickers and uninstall the old thermostat.
Note: For further details and compatibility with different types of air conditioning systems, visit momit.com.
BEVEL FEATURES
KIT CONTAINS
- Weather forecast
- Internet connection
- Battery level
- Boiler status
- Decrease temperature
- On/Off
- Increase temperature
- Indoor temperature
- Thermostat
- Base
KNOW ABOUT momit PRODUCTS
Ideal for system zoning.
Add as much Bevel units* as needed to control the temperature independently.
Control your A/C with a smartphone
- 100% compatible with remote control:
- Split
- Window
- Ducted
- Portable & Others
- For further details visit momit.com
- *Sold separately
INSTALLATION
- Make sure you have Internet connection to perform the device configuration correctly.
- Download Bevel App from Google Play or App Store.
- Assign a name to your home and define its location.
- Register your Gateway in Bevel App by scanning the QR code that is on the back of the device.
- Install the Gateway. You must connect it to the current through the micro USB cable and the power adapter, as well as the router through the Ethernet cable.
- When the 3 LEDs are on and steady, the Gateway installation will be completed correctly.
- Separate the two parts of the device, thermostat (A) and base (B).
- Remove the base cover (B) by pressing both tabs.
- Register the base (B) scanning the QR code that is on the device.
- Register the thermostat (A) by scanning the QR code that is on the back of the device.
- Remove the thermostat’s battery cover (A) and remove the safety tab. The Internet Connection icon will appear on the screen when the Internet is connected.
- Bevel App will confirm that the devices have been successfully connected. Otherwise repeat the registration steps.
- CUT THE ELECTRICAL SUPPLY OF THE INSTALLATION AREA.
- If you already have a thermostat installed, remove the front panel and label the wires with the supplied stickers. Now, uninstall the thermostat.
- Introduce the climatization system specifications in Bevel App.
- Make sure the switch is located to the left or to the right as indicated in Bevel App.
- Fix the base (B) to the wall with the supplied screws and insert the wires through the rear opening. Connect them as shown in Bevel App.
- Power on the installation area again. Your devices will connect to Internet, this process can take up to 5 minutes.
- Synchronize your devices by pressing the center button of the thermostat (A) for 5 seconds and immediately press the button on the base (B).
- When thermostat (A) and base (B) have been synchronized correctly, the synchronization icon will appear on the screen. Press next. Otherwise repeat the previous step.
- Replace the base cover (B).
- Select Heat or Cool mode.
- Set the thermostat (A) to the base (B) or the room you prefer.
Start enjoying your momit Bevel!
*For more details download the Installation Guide at momit.com
SAFETY WARNINGS
- Access momit.com
- Read carefully the Installation Guide of the device.
- Check the technical specifications of the device and make sure that the nominal voltage of the equipment adjusts to the tension in its electricity grid.
- Refer to the wiring diagram.
- Disconnect the power of the heating & cooling systems that are needed to manipulate the installation of momit Bevel.
- momit can not be held responsile for any damage caused during electricity grid handling.
- Do not allow the intervention of minors and / or unqualified personnel during installation.
WARRANTY
momit offers a two years warranty against manufacturing defects on all your
devices. The warranty period starts from the date of purchase. The terms of
the warranty offered by momit are legally defined in the market where the
product is sold. The handling of the equipment by personnel outside momit’s
technical support will mean the immediate loss of warranty.
Right of withdrawal: momit supports the clients return of purchase no
later than fourteen days after product delivery, so long as the equipment is
in perfect condition and with its original packaging.
Refund: In a period of thirty calendar days, momit shall receive the
equipment prepaid on the address listed on the website of momit:
momit.com
Please contact our support department prior to return at:
support@momit.com
FCC REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>