GEBERIT 971.465.00.0(00) Option Round 500x35x500mm Rund User Guide
- June 12, 2024
- GEBERIT
Table of Contents
GEBERIT 971.465.00.0(00) Option Round 500x35x500mm Rund
Technical data and conformity
Technical data
- Nominal voltage 220–240 V AC
- Mains frequency 50/60 Hz
- Protection degree IP44
- Protection class II
- Energy efficiency class light source F
- Light colour 3000 K
Declaration of conformity
You can obtain a copy of the declaration of conformity from your responsible
Geberit sales company.
Getting to know your product
The product at a glance
Geberit Option Round illuminated mirror
- Light switch: on, off or dim
Operating concept
Switch operating functions on or off
- Briefly press the touch sensor switch to switch the light on or off.
- The light switches on or off.
- Press and hold the touch sensor switch to dim the light.
- The light becomes brighter or darker.
- You can dim in the other direction by pressing the switch again
- When the light is off, press the touch sensor switch for at least 4 seconds to switch off the orientation light.
- The orientation light switches off.
Care instructions
You have selected a product with a highgrade surface. Please follow the care instructions below. The manufacturer does not assume any liability for product damage that arises as a result of incorrect care and handling.
General care instructions
- Never use cleaning agents that contain chlorine or that are acidic or corrosive.
- Never use cleaning agents that areabrasive or may scratch the surface.
- Never use sharp or pointed objects when cleaning.
- Make sure that an efficient source of ventilation and an appropriate room temperature are present in your bathroom.
- Protect the surface from bleaching due to extreme light and sun exposure.
Care instructions for mirror surfaces
Please note the following when cleaning mirror surfaces:
- Use a damp chamois leather or a soft, lint-free cloth.
- Remove drops from the edges of mirror surfaces immediately.
Cleaning surfaces
- Clean the surfaces. Please follow the corresponding care instructions.
- Dry the surfaces with a soft, lint-free cloth.
Disposal
Dismantle product
The product may be dismantled by a trained electrician only.
Disposal of waste electrical and electronic equipment
The symbol of the crossed-out wheeled bin means that waste electrical and electronic equipment (WEEE) must be disposed of separately and not with other non-recyclable waste. End users are legally obliged to return old equipment to public waste disposal authorities, distributors, or Geberit for proper disposal. Many distributors of electrical and electronic equipment are obliged to take back WEEE free of charge. Contact the responsible sales or service company to return the WEEE to Geberit. Used batteries and accumulators that are not enclosed within the old equipment, as well as lamps that can be removed from the old equipment in a non-destructive manner, must be separated from the old equipment before being handed over to a disposal point. If personal data is stored on the old equipment, end users themselves are responsible for deleting it before handing it over to a disposal point.
Geberit International AG Schachenstrasse 77, CH-8645 Jona documentation@geberit.com www.geberit.com
- 10717142411 © 09-2022 971.465.00.0(00)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>