HOVER-1 H1-ALPHA Electric Folding Scooter User Guide
- June 12, 2024
- HOVER-1
Table of Contents
HOVER-1 H1-ALPHA Electric Folding Scooter User Guide
As with all mechanical components, the Hover-1 Alpha is subjected to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratch, or change of coloring in highly stressed areas indicates that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.
WARNING
In this manual, the CAUTION sign indicates a hazardous situation that, if not
avoided, can cause minor or moderate injury.
WARNING
In this manual, the WARNING sign indicates a hazardous situation that, if
not avoided, can cause death or serious injury.
WARNING
Great care should be taken with the Hover-1 Alpha when folding or unfolding.
If you do not understand how to operate the levers, please visit
www.Hover-l.com
DO NOT RIDE YOUR HOVER-1 ALPHA WITHOUT ALL RELEASES SECURELY LOCKED
PLEASE READ THE USER MANUAL THOROUGHLY
Failure to follow the basic instructions and safety precautions listed in the
user manual can lead to damage to your device, other property damage, serious
bodily injury, and even death. Thank you for purchasing the Hover-1 Alpha.
Please read all instructions carefully before using and retain this manual for
future use and reference.
This manual applies to the Hover-1 Alpha.
- In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the Alpha safely.
- You can learn operating skills by reading the product manual and watching videos.
- This manual includes operating instructions and precautions.
- Users must read it carefully and follow the instructions.
- All users are responsible for any consequences caused by violating warning contents or prompt operations. Hover-1 can not be held liable.
ATTENTION
- Use only the supplied charger with this scooter. Charger Manufacturer: COMING DATA CO., LTD Model: CP4215
- The operating temperature range of the charger is 32 – 104° F (0-40° C).
- The operating temperature range of the E-Scooter is 32 – 104° F (0-40° C).
- Do not ride on icy or slippery surfaces
- Read the operation manual and warning labels before riding.
- Store the Alpha in a dry, ventilated environment.
- When transporting the Alpha, avoid violent crashes or impact
LOW-TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside the Alpha, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased. Use caution when riding the Alpha in cold temperatures (below 40 degrees F}. Doing so may increase the risk of mechanical failures of the scooter, which may lead to damage to your device, other property damage, serious bodily injury, and even death.
SAFETY INSTRUCTIONS
- Keep the device away from heat sources, direct sunlight, humidity, water, and any other liquids.
- Do not operate the device if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the device.
- Do not use the device if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
- Do not puncture or harm the exterior surface of the product in any way.
- Keep the device free from dust, lint, etc.
- Do not use this device for anything other than its intended use or purpose. Doing so may damage the device or lead to property damage, injury, or death.
- This product is not a toy. Keep out of reach of children.
- Do not expose batteries, battery packs, or batteries installed to excessive heat, such as direct sunlight, or open flame.
- Do not allow hands, feet, hair, body parts, clothing or similar articles to come in contact with moving parts, wheels or drive-train, while the Alpha is running.
- Do not operate, or allow others to operate, the Hover-1 Alpha, until the user understands all instructions, warnings, and safety features described in this manual.
- Check with your doctor if you have a medical condition that could affect your ability to use the Hover-1 Alpha.
- Persons with head, back or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Alpha.
- Do not operate if you are pregnant, have a heart condition, or have both.
- Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand and perform all of the safety instructions and to be able to assume the hazards inherent in unit use, should not use the Hover-1 Alpha.
NOTES:
In this manual, the above symbol with the word “NOTES” indicates instructions
or relevant facts the user should remember prior to using the device.
CAUTION!
In this manual, the above symbol with the word “CAUTION” indicates a hazardous
situation that, if not avoided, can cause minor or moderate injury.
WARNING!
In this manual, the above symbol with the word “WARNING” indicates a hazardous
situation that, if not avoided, can cause death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as proof
of purchase.
WARNING!
WARNING: Prolonged exposure to UV rays, rain, and the elements may damage the
enclosure materials. Store indoors when not in use.
INTRODUCTION
This manual is designed to give you the information you need for the safe
operation and maintenance of your new Alpha scooter. Please read it thoroughly
before riding your Alpha.
WARNING
Make sure you read this complete manual before riding your Hover-1 Alpha.
Failure to do so or failure to follow its guidelines could lead to serious
injury or death. The Alpha is a personal transporter. Our technology and
production processes are developed with strict testing for each Alpha scooter.
Operating the Alpha without following the contents of this manual may lead to
damage to your Alpha scooter or bodily injury.
PACKAGE CONTENTS
- Hover-1 Alpha Electric Folding Scooter
- Charging Cable
- Charger
- Air Pump
- Operation Manual
Your Hover-1 Alpha’s serial number is stamped respectively on the bottom of the platform. Record the serial number in the designated area of the “WARRANTY” section of this manual in the event that your Hover-1 Alpha is lost or stolen.
SAFETY PRECAUTIONS
- The first rule in safe riding is to use common sense.
- Different localities and countries have different laws governing riding electric transportation devices on public roads.
- You should check with local officials to ensure you are complying with local traffic law requirements.
- Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.
- For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
- Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
- Ride with the traffic, not against it.
- Ride defensively; expect the unexpected.
- Give pedestrians the right of way.
- Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
- Slow down at all street intersections and look to the left and right before crossing.
Your Alpha electric folding scooter is not equipped with reflectors. It is not
recommended that you ride in conditions of low visibility. If you are riding
your scooter in low-visibility conditions, ensure your LED
light is turned on, and that you are wearing bright, reflective clothing.
WARNING
When you ride in low-visibility conditions such as fog, dusk, or night, you
might be difficult to see, which could lead to a collision. To increase your
level of safety, be sure to wear bright, reflective clothing when riding in
poor lighting conditions. Think about safety when you ride. You can prevent
many accidents if you think about safety. Below is a helpful checklist for
riders.
SAFETY CHECKLIST
- Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Alpha.
- Do not ride too fast – with increased speed comes increased risk.
- If you are moving at a higher speed, small bumps can turn into large impacts, leading to a higher risk of injury if an accident occurs. Do not ride with pets.
- Before stepping on your Alpha, make sure it is placed flat on level ground and the power is on. manufacturer warranty and may cause your Alpha to fail, resulting in injury or death.
- Do not use the Alpha in a manner that would put people or property in danger.
- If you and your friend(s) are riding Alpha scooters together, be sure to keep a safe distance between each other to prevent collisions. property damage, serious injuries, or even death.
- Be sure to keep your feet on the scooter at all times. Moving your feet off your scooter while driving is dangerous and may cause the scooter to stop or veer sideways.
- Do not operate the Alpha while under the influence of drugs and/or alcohol.
- Do not operate the Alpha when you are restless or sleepy.
- Use your best judgment to keep yourself out of dangerous situations with your Alpha.
- Do not ride your Alpha scooter off of curbs, or ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard. Misuse of your Alpha voids the manufacturer’s warranty and may lead to injury or damage.
- Do not abuse your Alpha, doing so can damage your unit and cause failure to the operating system which may lead to injury. Physical abuse, including dropping your Alpha scooter, voids the manufacturer’s warranty.
- Do not operate in or near puddles of water, mud, sand, stones, gravel, or debris, or near rough and rugged terrain.
The Alpha can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please lift your Alpha scooter over and past the obstruction.
-
Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads, or in extreme heat or cold.
-
Bend your knees when riding on the bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.
-
If you are unsure if you can safely ride on a specific terrain, step off Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brakes. Apply your brakes gradually and give yourself enough room to come to a complete stop safely. and carry your Alpha. Al WAYS BE ON THE SIDE OF CAUTION.
-
Do not attempt to ride over bumps or objects greater than ½ in. even when prepared and bending your knees.
-
PAY ATTENTION – look at where you are riding and be conscious of the road conditions, people, places, property, and objects around you.
-
Do not operate the Alpha scooter in crowded areas.
-
Operate your Alpha scooter with extreme caution when indoors, especially around people, property, and narrow spaces.
-
Do not operate the Alpha while talking, texting, or looking at your phone.
-
Do not ride your Alpha scooter where it is not permitted.
-
Do not ride your Alpha near motor vehicles or on public roads.
-
Do not travel up or down steep hills.
-
The Alpha is intended for use by a single individual, DO NOT attempt
to operate the Alpha with two or more people. -
Do not carry anything while riding the Alpha scooter.
-
Individuals with a lack of balance should not attempt to operate the Alpha scooter.
-
Pregnant women should not operate the Alpha scooter.
-
Young children and the elderly should not operate the Alpha.
-
At higher speeds, always take into consideration longer stopping distances.
-
Do not attempt to jump on or off your Alpha scooter.
WARNING
When you ride in low-visibility conditions such as fog, dusk, or night, you
might be difficult to see, which could lead to a collision. In addition wear
bright, reflective clothing when riding in poor lighting conditions.
- Do not attempt any stunts or tricks with your Alpha scooter.
- Do not ride the Alpha in dark or poorly lit areas.
- Do not ride the Alpha near or over potholes, cracks, or uneven pavement or surfaces.
- Do not operate your Alpha scooter off-road.
- Do not turn sharply, especially at high speeds.
- Do not exceed the maximum or minimum weight limits.
- Avoid driving the Alpha in unsafe places, including near areas with flammable gas, steam, liquid, dust, and fiber, which could cause fire and explosion accidents.
- Do not operate near swimming pools or other bodies of water.
There may be an additional risk of injury if you use your scooter incorrectly. This includes, but is not limited to:
- Jumping your scooter
- Riding over debris or obstacles
- Performing stunts
- Riding in off-road terrain
- Riding fast
- Racing other riders
- Riding in an unusual manner
The aforementioned examples add stress to each part of your scooter and can
lead to long-term damage of the device. Damage to your scooter can lead to an
accident or increase your risk of injury. To decrease
your risk of injury, use your scooter correctly.
WARNING
To reduce the risk of injury, adult supervision is required. Never use in
roadways, near motor vehicles, on or near steep inclines or steps, swimming
pools or other bodies of water; always wear shoes, and never allow more than
one rider.
CARE & MAINTENANCE
- Do not expose the device to liquid, moisture, or humidity to avoid damage to the product’s internal circuitry.
- Do not use abrasive cleaning solvents to clean the device.
- Do not expose the device to extremely high or low temperatures as this will shorten the life of the electronic device, destroy the battery, and/or distort certain plastic parts.
- Do not dispose of the device in the fire as it may explode or combust.
- Do not expose the device to contact with sharp objects as this will cause scratches and damage.
- Do not let the device fall from high places, as doing so may damage the internal circuitry.
- Do not attempt to disassemble the device.
- Use only the charger provided by Hover-1.
WARNING
Avoid using water or other liquids for cleaning. If water or other liquids
enter the Alpha, it will cause permanent damage to the internal components.
WARNING
Users who disassemble the Alpha scooter without permission will void the
warranty.
BATTERY CARE / MAINTENANCE
BATTERY SPECIFICATIONS
- Battery Type: Rechargeable lithium-ion battery
- Charge Time: Up to 5 hours
- Battery Voltage: 36V
- Battery Capacity: 6 Ah
- Working Temperature: 32°F – 104°F
- Charging Temperature: 32°F – 104°F
- Storage Time: 1 year
- Storage Temperature: -4°F – 104°F
- Storage Humidity: 5% – 95%
BATTERY MAINTENANCE
The lithium-ion battery is built into the device. Do not disassemble the
device to remove the battery or attempt to separate it from the device.
- When charging the device, please use the enclosed 1-pin charging cable or otherwise ensure that the battery charging conditions are met.
- Do not connect or attach the device or the battery to a power supply plug or directly to a car’s cigarette lighter.
- Do not place the device or batteries near a fire, or into direct sunlight. Heating the device and/or the battery can cause additional heating, breaking, or ignition of the battery inside the device.
- Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.
- To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
WARNING
Failure to follow the safety precautions listed below could lead
- Do not attempt to modify, change, or replace your battery.
- Do not use your device if the battery begins to emit odor, overheat, or begins to leak.
- Do not touch any leaking materials or breathe fumes emitted.
- Do not allow children and animals to touch the battery.
- The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
- Please only use the charger provided by Hover-1.
- Do not attempt to charge the device if the battery has discharged or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.
- Lithium-ion batteries are considered to be hazardous materials. Please follow all local, state, and federal laws in regard to recycling, handling, and disposing of Lithium-ion batteries.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS
EMITTED FROM THE BATTERY.
SPECIFICATIONS
PARTS LIST
- Scooter Frame
- Handle Bar Assembly
- Charger+ Charging Cable
- Allen Wrench & Bolts
- Air Pump
- 6pcs Spare Bolts
HOVER-1 ALPHA DIAGRAM
FEATURES/PARTS
- LED Display
- Bell
- Brake Handle
- Handlebars(L)
- Handlebars(R)
- Throttle
- Power Button
- Folding Clip
- Steering Column
- Folding Lock
- Kickstand
- Scooter Platform
- Charging Port
- Folding Hook
- Brake Light
- Rear Disc Brake
HOVER-1 ALPHA DIAGRAM
LED DISPLAY
BLUETOOTH SPEAKER
The scooter has a powerful built-in wireless speaker so you can play your
music while riding.
PAIRING THE SPEAKER
- Turn on your scooter, and the speaker will “Ping” to announce that it’s waiting for a Bluetooth® connection. This will indicate your scooter speaker is now in pairing mode.
- Place the scooter and the Bluetooth® device to which you would like to pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart during pairing.
- Ensure Bluetooth® is enabled on your phone or music device. Refer to the manufacturer’s instructions for how to enable Bluetooth® on your device.
- Once you have activated Bluetooth® on your device, select the option “H 1-ALPHA” from the list of available Bluetooth® devices.
- The scooter will say “Paired” when successfully paired.
- Please note, the pairing mode on the scooter will last for two minutes. If no devices are paired after two minutes, the scooter speaker will automatically return to standby mode.
- If pairing is unsuccessful, turn off the scooter first and re-pair following the aforementioned steps.
- If your smartphone is out of range, or the battery is low on your scooter, your speaker may disconnect from your smart device, and the hoverboard will say “Disconnected.” To reconnect, follow the aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the scooter speaker with a device, the speaker will remember this device and will pair automatically when the device’s Bluetooth® is activated and in range. You do not need to re-pair any previously connected devices. Your scooter can pair up to two multi-point devices. You can reconnect a previously paired device without going through the pairing up to two devices.
LISTENING TO MUSIC
Once the Bluetooth speaker is paired to your device, you can stream music
wirelessly through it. Select the track you wish to listen to on your device
to listen via the speaker. All volume and track controls will be made using
your music device. Should you encounter any problems while streaming, please
refer to your device’s user manual.
CHARGING YOUR ALPHA CHARGING THE DEVICE
Ensure that the charging port is clean and dry.
- Make sure that there is no dust, debris, or dirt inside the port.
- Plug the charger into a grounded wall outlet.
- Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
- Align and connect the 1-pin charging cable to the charging port of the Alpha Scooter.
- [DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.)
- The charging indicator light on the charger itself should change to RED, indicating that your device is now being charged.
- When the RED indicator light on your charger turns to GREEN, then your device is fully charged.
- After fully charging your Alpha Scooter, unplug the charger from your device and from the power outlet.
CAUTION
Only use the included charging cable and charger to charge your Hover-1 Alpha.
Using any other unauthorized charger may damage your Hover-1 Alpha.
WARNING
Any Alpha that does not work properly can cause you to lose control and fall.
Inspect the entire device thoroughly before every ride, and do not ride it
until any problems have been corrected.
PREPARING TOUR SCOOICK PLEASE READ
THE FOLLOWING INSTRUCTIONS CAREFULLY ATTACHING THE HANDLEBAR KIT
Attach the handlebar kit by placing it into the steering column, align it for
error hales, and tighten the A crowd in need
PINCH POINTS
Some parts of your Hover-1 Alpha can injure you if mishandled. Moving and
folding parts can cut skin. Clamps and pivoting parts such as brake levers can
pinch. When folding and unfolding your Hover-1 Alpha, Please watch for pinch
points where possible injury may be sustained. Do not leave your hand in these
areas during folding or unfolding
LOCKING MECHANISM
After riding the scooter, the locking mechanism may loosen over time. If you
notice the steering column is loose, don’t ride the scooter until it is fully
secured. Use the 2.5 Allen wrench provided to tighten point “A” (marked below)
until the locking mechanism fits securely. If you are unable to close the
mechanism completely, you may need to loosen “A” slightly until the locking
mechanism is able to close securely
FOLDING & UNFOLDING
FOLDING & UNFOLDING YOUR ALPHA SCOOTER. To unfold your Alpha, press down on
the folding clip and pull the steering column up. Raise the safety lock up and
push it into place to secure the steering column. You will hear a “click”,
indicating the steering column is locked. Ensure the steering column is
secured in place.
HIGH-SPEED MODE
To active high-speed mode, ensure the Alpha is powered on and not in motion.
Press the power button once, and in the high-speed mode, the indicator should
light up on your display to indicate it is activated.
CRUISE CONTROL
To active cruise control while riding, press the Throttle down two times
quickly, you will hear a beep and the cruise control indicator will light up
on the LED display indicating that it is activated; Press the Throttle down
once or squeeze the Brake Handle to cancel cruise control.
KICK TO START
For safety reasons, the scooter will not accelerate unless it is already
moving at least 1.8mph (3km/h). You must first kick off the ground and then
press the throttle in order to ride the scooter.
BEFORE RIDING
WARNING
Any Alpha Scooter that does not work properly can cause you to lose control
and fall. Do not ride an Alpha with a part that is damaged; replace the
damaged part before riding. It is important that you fully understand all
elements of your Alpha scooter. If these elements are not used correctly, you
will not have full control of your Alpha. Before you ride, learn the functions
of the
various mechanisms on your scooter. Practice using these elements of your
Alpha at slower speeds in a flat, open area before taking the device out in
public areas.
PRE-RIDE CHECKLIST
Ensure that your Alpha is in proper working order each and every time you
ride. If a part of the Alpha scooter does not function correctly, please
contact our Customer Support Center.
- Ensure the battery is fully charged before riding your scooter.
- If the Alpha scooter is not used for an extended period of time, you may need to recharge the battery every 2 months to maintain the battery life.
- Please wear all appropriate safety and protective gear as previously mentioned in the Operation Manual before operating your device.
- Make sure to wear comfortable clothes and flat closed-toe shoes when operating your device.
- Please carefully read the Operation Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your experience.
RIDING YOUR ALPHA SCOOTER
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO
DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER’S WARRANTY, LEAD TO PROPERTY
DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. OPERATING YOUR
DEVICE
Make sure the device is fully charged before the first initial use. Before turning on your Alpha scooter, ride it like a normal kick scooter to get comfortable with the device before using it with the motor. When comfortable riding the scooter, power it on. For the motor to activate, you must first start riding the scooter and then push the throttle down with your thumb. To slow down the scooter, disengage the throttle and squeeze the Brake handle to engage the disk brake. The Brake is pressure sensitive so a lighter grip means more stopping power. To tum, use the handlebar to fur in the direction you wish to turn. The Alpha scooter can be operated manually if you do not wish to use the motor. As you get comfortable on the device, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force. Prepare to brace yourself if you encounter bumps or uneven surfaces, then dismount and carry your Alpha to a safe operating surface.
WARNING
Do not tum sharply or at high speeds to avoid danger. Do not turn or ride
quickly dong slopes, as it may cause injury.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the
limits listed in the “Specifications” section of this manual.
WARNING
Overweight exertion on the device may increase the possibility of injury or
product damage.
OPERATING RANGE
-
The following are some of the major factors that will affect the operating range of your device.
-
Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly.
-
Weight: A lighter user will have further range than a heavier user.
-
Ambient temperature: Please ride and store the device under recommended temperatures, which will increase driving distance; battery life, and overall performance of your device.
-
Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease the overall distance. -
Do not attempt to stop suddenly as this may lead to injury or damage to your brake discs.
WARNING
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid
misuse and potential injury, do not apply sudden or excessive force to your
brake. Apply the brake gradually and give yourself enough room to come to a
complete stop safely. Please follow all local, state, and federal laws in
regard to recycling handling, and disposing of Lithium-ion batteries.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS
EMITTED FROM THE BATTERY.
While riding your Alpha Scooter, if there is a system error or illegal
operation performed the device will prompt the user in a variety of ways. The
following are common occurrences where you will see Safety
Alerts. These notices should not be ignored, but appropriate action should be
taken to correct any illegal operation, failure, or errors.
- Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
- The battery voltage is too low.
- The device is still charging.
- Overheating or motor temperature is too high.
- When the battery is about to run out of power, the battery icon will flash.
- If any or both tires are blocked, the device will stop after 10 seconds.
- When the battery level has depleted below protection mode, the device motor will power off after 15 seconds.
- While sustaining a high discharge current during use (such as riding up a steep slope for a long period of time), the device motor may slow down or shut off because of high temperature.
FCC STATEMENT
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC STATEMENT
For warranty information, Please visit us at:
www.hover-1.com
Manufacturer: DGL Group, Ltd. 195 Raritan Center Parkway Edison, NJ 08837
Affix Serial Number Label Here
Download PDF:HOVER-1 H1-ALPHA Electric Folding Scooter User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>